voicecoils
1 MW
I'm seeking some advice on what to do with some items I've got sitting around for a few years waiting for an EV project. Here's what I have:
Magmotor C40-300http://www.robotmarketplace.com/products/MAG-C40-300.html#
Here are its specs:
3.8 Horsepower
4" Diameter
6.9" Long
3840 oz-in Torque
84% Efficiency
24 Volts
4000 RPM
11.9 Pounds
Four Hawker Genesis 12V 13aH batteries. Not sure of their health, haven't been touched since 2004.
And lastly a 24V charger.
I need a controller and something put them in. As for the controller I've been looking at the ones found here: http://www.astroflight.com/index.php?main_page=index&cPath=20 From what I've read of the Magmotors, they can be run above 24v as long as the current is limited as they will continue to try to draw more current until they damage themselves. What do you guys think of these controller kits?
Can anyone suggest a suitable vehicle for this these items?
Thanks to anyone who can provide input. (I've put this in the ebike section as I'm as yet undecided as to how I'll use the parts)
Magmotor C40-300http://www.robotmarketplace.com/products/MAG-C40-300.html#
Here are its specs:
3.8 Horsepower
4" Diameter
6.9" Long
3840 oz-in Torque
84% Efficiency
24 Volts
4000 RPM
11.9 Pounds
Four Hawker Genesis 12V 13aH batteries. Not sure of their health, haven't been touched since 2004.
And lastly a 24V charger.
I need a controller and something put them in. As for the controller I've been looking at the ones found here: http://www.astroflight.com/index.php?main_page=index&cPath=20 From what I've read of the Magmotors, they can be run above 24v as long as the current is limited as they will continue to try to draw more current until they damage themselves. What do you guys think of these controller kits?
Can anyone suggest a suitable vehicle for this these items?
Thanks to anyone who can provide input. (I've put this in the ebike section as I'm as yet undecided as to how I'll use the parts)