hey, sry looks like i have missed this reply
to complete the question:
yes, Multistars was hooked up to the Adaptto BMS.
Simply putting 3 of them in Parallel and 5 of them in Series.
so i had 15x 4s16000 in my Frame.
Made simply parallel and series wires for them and plugged them with the 4s balance wires direct in the BMS.
meantime switched all my parts to a NYX frame. unfortunately there is no space for big lipo bricks, so i switched also to 18650s 30q (22s)
did my best for a low RI pack to compensate the voltage sag from 200amps.
worked very well.
Adaptto Display give me 18kw on a fresh battery. so a bit more punch on the top.
switching to the NYX saved me also sweet 9Kg of weight penalty =)
not because the weight about 6.9kg is simply fake or wrong or early model from 2015. narrow tires, no kickstand yet, plastic fenders, 18650 battery....
too bad i expected a better quality from nyx. beside a poor finish on the carbon part(s), fitting the "halfs" with missalligned gaps the most frocking crap was the swingarm. its simply not alligned with the bottombracket. i thought it was only my "cheap" version of the nyx but it looks like its normal.
as i read your post about the bushings it was clear.
let me put some pics inside to show what i mean.
at the end i put spacers between the swingarm parts to bring this thing in shape. switched the M6 screws to 12.9 strong steel.
some days ago i had finished the bike. battery, electrics, dc/dc, bms and xenon light controll unit are inside veryyyyyyy tight, but it fits =)