TheBestEuroSpec-DIY-eBikeSetup?

General Discussion about electric bicycles.
Post Reply
Stevil_Knevil   10 kW

10 kW
Posts: 772
Joined: Jan 09 2007 8:32pm
Location: Up where the air is fresh and clean

TheBestEuroSpec-DIY-eBikeSetup?

Post by Stevil_Knevil » Apr 01 2015 8:50pm

Who's got it?

Assuming 250W applied to mostly flat pavement ..is PAS still required over there?
____________________________________
We don't care. We're riding Ducatis in our dreams.

User avatar
motomech   1.21 GW

1.21 GW
Posts: 3518
Joined: Sep 11 2010 12:21am
Location: Tucson & Punta Cana Baja Mexico

Re: TheBestEuroSpec-DIY-eBikeSetup?

Post by motomech » Apr 01 2015 9:46pm

"Best"? In what way?
All around;
From BMS Battery
Q100H (Cute) Frt wheel mount. (201) wind.
SO6S sine wave 14 Amp controller w/ the SLCD-3 display w/ 5-range "torque imitation" PAS.
New "dolphin style" Batt. w/ Samsung cells.
Motomech '11 Motobecane Fathom team, frt. mounted, recycled SWX02 from a Jump rental, 14S (52V nom.) Turnigy LiPoly, PSW Power 9-FET 20A controller. Mean Well HLG-320H-54A, Schwalbe Marathon's, 27 to 28 MPH.

Stevil_Knevil   10 kW

10 kW
Posts: 772
Joined: Jan 09 2007 8:32pm
Location: Up where the air is fresh and clean

Re: TheBestEuroSpec-DIY-eBikeSetup?

Post by Stevil_Knevil » Apr 01 2015 9:52pm

motomech wrote:"Best"? In what way?
Nebulous question - verified :)

Most Satisfying Euro Spec (250W) DIY Setup :roll:
____________________________________
We don't care. We're riding Ducatis in our dreams.

Post Reply