Who's got it?
Assuming 250W applied to mostly flat pavement ..is PAS still required over there?
TheBestEuroSpec-DIY-eBikeSetup?
-
- Posts: 772
- Joined: Jan 09 2007 8:32pm
- Location: Up where the air is fresh and clean
TheBestEuroSpec-DIY-eBikeSetup?
____________________________________
We don't care. We're riding Ducatis in our dreams.
We don't care. We're riding Ducatis in our dreams.
Re: TheBestEuroSpec-DIY-eBikeSetup?
"Best"? In what way?
All around;
From BMS Battery
Q100H (Cute) Frt wheel mount. (201) wind.
SO6S sine wave 14 Amp controller w/ the SLCD-3 display w/ 5-range "torque imitation" PAS.
New "dolphin style" Batt. w/ Samsung cells.
All around;
From BMS Battery
Q100H (Cute) Frt wheel mount. (201) wind.
SO6S sine wave 14 Amp controller w/ the SLCD-3 display w/ 5-range "torque imitation" PAS.
New "dolphin style" Batt. w/ Samsung cells.
Motomech '11 Motobecane Fathom team, frt. mounted, recycled SWX02 from a Jump rental, 14S (52V nom.) Turnigy LiPoly, PSW Power 9-FET 20A controller. Mean Well HLG-320H-54A, Schwalbe Marathon's, 27 to 28 MPH.
-
- Posts: 772
- Joined: Jan 09 2007 8:32pm
- Location: Up where the air is fresh and clean
Re: TheBestEuroSpec-DIY-eBikeSetup?
Nebulous question - verifiedmotomech wrote:"Best"? In what way?

Most Satisfying Euro Spec (250W) DIY Setup

____________________________________
We don't care. We're riding Ducatis in our dreams.
We don't care. We're riding Ducatis in our dreams.