question about kw rating for kelly controllers

dhmillertime

10 mW
Joined
Oct 26, 2011
Messages
25
I was looking at kelly controllers to mate with new sensored c80110. A kls6040s is spec'd at <4kw but can handle 60v and 175A continous. A keb48601 however, is a 6kw controller that handles the same 60v but 140A continous. Why isnt the math adding up? Is there something else going on besides volt*amps=kw? I would prefer the quieter kls series but also want use the full power of the 6kw motor.
 
See this.
https://endless-sphere.com/forums/viewtopic.php?f=2&t=74403
 
Back
Top