Me1003 with 600a 100v controller w/ regen

General Discussion about electric bicycles.
Post Reply
JoeReal   10 mW

10 mW
Posts: 30
Joined: Feb 23 2015 10:36pm

Me1003 with 600a 100v controller w/ regen

Post by JoeReal » Oct 29 2015 9:34pm

Hey guys,

I am looking to upgrade my Altrax AXE7245 with a Controller with regen. I would also like for it to allow for >100V pack voltage.

I am thinking about this kelly controller http://http://www.cloudelectric.com/Pro ... 2DHPM12601
Is this compatible with my motor? I know of someone using the same motor with a 600a kelly controller and 100v, so I assume it will work fine, but I would love your opinions.

Is there something else you think would be better?

Thanks again for the help, guys.
Joe

Heres how the bike looks currently, in case anyone was curious. :D

Image

User avatar
Nobuo   10 kW

10 kW
Posts: 839
Joined: Nov 21 2014 3:38am
Location: Madrid

Re: Me1003 with 600a 100v controller w/ regen

Post by Nobuo » Feb 20 2016 2:47am

it should work, which motor model are you using?

also i'm curious about what kind of battery are you using to feed such power? :o
* Lithium + Air = Fire * <-----> ** Lithium + Chemical-Additives + Air = ZERO Fire **
<Battery and EV works>
https://facebook.com/evmadrid1
<Battery building resources>
http://www.endless-sphere.com/forums/vi ... 14&t=68005

JoeReal   10 mW

10 mW
Posts: 30
Joined: Feb 23 2015 10:36pm

Re: Me1003 with 600a 100v controller w/ regen

Post by JoeReal » Feb 20 2016 3:29am

Turns out, it definitely works... Really well, too!

I did go with the HPM12601, super smooth, works great and has a lot of great features the Altrax doesn't have.

The batteries are Nissan Leaf modules.

User avatar
DasDouble   100 kW

100 kW
Posts: 1149
Joined: Jul 12 2015 1:35pm
Location: GERMANIA :D

Re: Me1003 with 600a 100v controller w/ regen

Post by DasDouble » Nov 19 2016 3:27pm

I like the bike really much, but I am curious if your front wheel will blockate if you hit a big bump so the front fork gets compressed which will result in that your wheel touches the battery pack..... :o :shock: :shock: :roll: :shock:
Mechatronics-Engineering Student
-Built own ebike: ✔
-Built own 3.2kWh LiIon battery (300Amps): ✔
-Overtake Porsche with own Ebike: ✔
-Take off with ebike: ✖

~14kW, 3.2kWh LiIon, QS 205 8ml ff, hubsink

heathyoung   1 MW

1 MW
Posts: 1545
Joined: May 27 2009 2:01am
Location: Newcastle, Australia

Re: Me1003 with 600a 100v controller w/ regen

Post by heathyoung » Nov 20 2016 7:01pm

What is the frame you are using? How did your 0-60 times improve?

Looks good, and your batteries are aircooled as well 8)
GNG offroad build on Craftworks DHR with 12S2P lipo. Light, balanced, powerful, able to climb a tree.
Project Vectrii (2) - status - Finished. Nope. 38S Leaf cells are next. Now have 2 of them - Averages 50Wh/Klm

Post Reply