LiFeCycle
1 W
Hey
I've got a 2002 santa cruz V10, all the details are here:
http://www.santacruzbicycles.com/en-AU/bike/v10/1
"The V10.1 uses a custom rear hub made by Hadley Racing. The hub width is 140mm, and the Axle size is 15mm. The total rear dropout spacing is 160mm (140mm Hub + 20mm Floating Brake Mount = 160mm)"
Would the floating brake mount complicate a rear hub conversion for this one? I'd like to install a MXUS 3000 on it. Assume the main thing would be to get some new dropouts made for it that act as a torque arm and hold it in? I think the MXUS would fit in the 140 that the hub is now taking, but would the axle be long enough to cover the 20mm extra required for the floating brake mount?
I've got a 2002 santa cruz V10, all the details are here:
http://www.santacruzbicycles.com/en-AU/bike/v10/1
"The V10.1 uses a custom rear hub made by Hadley Racing. The hub width is 140mm, and the Axle size is 15mm. The total rear dropout spacing is 160mm (140mm Hub + 20mm Floating Brake Mount = 160mm)"
Would the floating brake mount complicate a rear hub conversion for this one? I'd like to install a MXUS 3000 on it. Assume the main thing would be to get some new dropouts made for it that act as a torque arm and hold it in? I think the MXUS would fit in the 140 that the hub is now taking, but would the axle be long enough to cover the 20mm extra required for the floating brake mount?