My 1st Cruise bike project .

Hi guys , im lev ,27 , from israel ,and here i will document my upcoming project . my current ebike is foldable Momo design 48v 27 amps . ( upgraded to 500 controller with enlarged amps bridge ) .
i used to love it , until i got my hands on some friends custom e-bike 1500w 60v , which took me to the new level , where i've had a really hard time to get used to my now " simple" bike .
First , im going to post the part as they are , and later , with the flow of the project , i'll upload all the customizations. also will note the prices if it interesting for you . or maybe some locals will find this forum as well ( which i hope will happen )

Bike Specs :
Leisger cruiser Frame only ( looks X10 times better when naked without all the component on it ) 1500 nis - 389.45 US Dollar

RST fork , 160mm , 20mm axle . ( which will pump the front 4cm , but im reducing the height of the stem and handlebars , so it will be balanced well ) 1300 nis - 337 US Dollar

72volt , 44.5 amps battery custom made by a local shop , panasonic cells 8550 nis - 2220.04 US Dollar
IMG SOON
Unbranded hub motor Rated Power: 1500W – 2200W ( purchased from a reliable local shop which guarantees the quality of the motors ) 270 nis - 714.05 US Dollar
IMG SOON
1500w controller 480 nis - 124.63 US Dollar

Shimano Saint M820 Disc Brake X2 $345

Hope pro 4 front hub - orange $80.49

Nice quality unbranded mirrors from ebay 122 nis - $31.88

31.8mm MTB Mountain Bike Handlebar US $22.79 - ILS 87.81

Handlebar Switch ILS 31.90 - 8$

RaceFace Half Nelson Lock-On Grip US $21.59 ILS 83.19

12V 135DB Loud Car Dual-tone Snail Electric Air Horn US $9.95 ILS 38.34

Mowa stem 31.8X50mm 176g Orange US $48.00 ILS 184.94

DC-Voltage-Converter 72 > 12 US $15.90 ILS 61.26

Headlights X2 $ 15.29 X2

Custom rainbow color rotor screws ( dont judge me , i like customization ) $ 7.96 X2

Gps alarm-siren $ 40.65



all of this already ordered and im exited to get my hands on it . it is all begins very soon , so i will keep posting the process of all the fittings and customization ( i hope you guys will be interested in the project ) . any ideas , questions , suggestions will be accepted and considered in the flow of the project ) .

you havent listed what kind of battery or motor that you plan on using. Which are arguably the most vital components to an ebike besides custom rainbow colored rotor screws :wink:

t_tberg said:

you havent listed what kind of battery or motor that you plan on using. Which are arguably the most vital components to an ebike besides custom rainbow colored rotor screws :wink:

Click to expand...

now thats where you wrong fam

72volt , 44.5 amps battery custom made by a local shop , panasonic cells 8550 nis - 2220.04 US Dollar
IMG SOON
Unbranded hub motor Rated Power: 1500W – 2200W ( purchased from a reliable local shop which guarantees the quality of the motors ) 270 nis - 714.05 US Dollar
IMG SOON
1500w controller 480 nis - 124.63 US Dollar

Click to expand...

Oh I see that now, make sure you get some beefy torque arms on that puppy.

guys , after wandering on the forum for HOURS , i cannot find which HUB temperature sensor i need to get to push it cables through the axle . any suggestions ?

this is the box i make ( aluminium) , will narrowed at front .
the wheel finished ( 4cm rims )
battery ( surprisingly small for 72v 44a . i can fit 2 of those in the frame )
and kellys controller with regen .

getting closer to finish



my idea for the foot rests .

Hey OP you should be done by now, right?

teddyc1 said:

Hey OP you should be done by now, right?

Click to expand...

Heh, nice of you to notice. Yes im in the late stages of cosmetic changes and upgrades. Next week im sending the bike to the welder, will do frame changes. Then the paint. The final ver will be nothing you've seen before ))


P. S

I've also had theft accident, and by 0000.00001% luck i had, police found all the electric components that has been stolen. So everything got delayed by few months.
Almost lost like 4000$ in electronic. Pheew that was close

this thread can be closed because i broke my frame due totorque overload.
new project incoming .
this time i will only post a thread when the bike will be fully assembled .

sneak a peak :

t_tberg said:

Oh I see that now, make sure you get some beefy torque arms on that puppy.

Click to expand...

an ounce of prevention something something :wink: