Need Help Setting Up (MQCON)Sabvoton 48V Controller.

Macscroge

100 µW
Joined
Apr 9, 2017
Messages
9
Hi all,

I've just got my SSC 48V150A motor controller and I'm having difficulty getting it going.

I have the drivers and the software installed. I have connected the e-lock to the B+ Terminal as per the instructions. Running on a 50v Power supply

The controller LED flashes but in the software it doesn't respond. TX flashes but RX doesn't.

It appears in device manager so it seems the controller is alive, what am I missing?

Thank for your help,

Conor
 
I don't have the motor connected as of yet, waiting for it to arrive. But I didn't think that'd make a difference.
 
Update:

Everything working, I got a bluetooth adapter(from here https://www.cloudsto.com/store/andy...-adapter-for-sabvoton-controllers-detail.html and that worked perfectly. The cable that was sent with the controller must have been RS232.
The newer controllers use RS485 (marked with an M in the model number).

When you're calibrating the hall sensors through the app make sure you change the motor amperage manually or nothing will happen. I set mine to 10A. The app is on the android store, under 'MQCON'.

Hope that helps someone :) .
 
Back
Top