Troubleshooting new controller

Joined
Dec 31, 2017
Messages
64
I have a new controller but can't get it working with my existing setup.

I bought this controller: https://electricrt.myshopify.com/collections/controllers-1/products/edge-3000w-sinewave-controller-18-mosfet

I have it connected to my cycle analyst 3, it came with a throttle with ignition, it's switched on, the CA3 appears to read everything fine, eg throttle is responsive (i can see the activity on the CA3)

I don't know what i'm missing. Any tips on what I should check to troubleshoot this?

Note: the motor is fine, I've tested it with another controller I have, it spins fine, all the signals are fine/have voltage. So I'm guessing it's something with the controller I'm missing.
 
Back
Top