BionX D500 shaky freehub issue

now that Bionx is banckrupt in Canada I have nowhere to get this motor serviced. The issue is that the motor freehub is shaky, like if a bearing was bad. See this video.

https://www.dropbox.com/s/9wy5aw9d491ocd3/41934290_296453377620684_4817879804806168576_n.mp4?dl=0

If anyone has fix this in the past any help would be appreciated. I'm willing to do this on my own as I have basic mechanic skills.
Post any photos if you can.

Thanks,

Claude

Your problem is as simple as they come. You have a worn out bearing. Disassemble, find the exact same size at any bearing shop, reassemble.

I was hoping to get disassembly lead.... I'm pretty sure I can find a bearing equivalent out there, but not sure about the freehub model or part #.

Thanks

Disassembly should be pretty simple. There must be a locking ring/screw, that will free the hub to be pulled out.

The bearing should be the only part that need to be replaced.

Hello,

I have the same issue (worn out D500 free wheel hub). Can I pls get more info, what to replace, how to take it apart?
Thank you very much!

See pictures in this group:
https://www.facebook.com/groups/2373073794/permalink/10156114230058795/

Post more once you figure out how to remove the freehub.