Hi all,
I'm glad to have the opportunity to meet this huge knowledge database here.
I'm reading already for two hours (and found many other interesting topics), but still unable to find "my topic" yet.
I would like to ask for a help for an 8FUN motor I've been provided with.
It comes about the controller I have to use for it.
I have few other questions in mind too.
But let start with the description and data first.
It's laced in a 28" (700C) wheel and has the designation: SWXK36V250W185K, followed by: 1301270034.
It's a bare wheel only, with no other accessories.
Motor has 9-pin connector (male) with three of them bigger/thicker and the rest of six - thinner/smaller.
What I would need to ask is:
1. Kind of (cheaper) controller that is able to work with;
2. Eventual availability of a head(+tail) lights connector on this controller;
3. Option to use the hall sensors, but also to go without them too.
4. Scheme/diagram of this 9-pin connector, as the cable is too short and it must be made longer.
5. I'm unclear also whether this motor can be used with a throttle or with a PAS. Any experience ? I prefer to make it able to go with throttle, say on the left hand side. (Which throttle I need?)
6. Battery should be a 10S3P or 4P, with Panasonic 18650PF cells, but it's still in project. I'm looking for a BMS for it too. I plan to use the VRUZEND kit for assembly, which requires no soldering. Any advice here will be also appreciated.
TNX for your input !
PS. If I'm in the wrong topic, let a Mod to move the post, please.
I'm glad to have the opportunity to meet this huge knowledge database here.
I'm reading already for two hours (and found many other interesting topics), but still unable to find "my topic" yet.
I would like to ask for a help for an 8FUN motor I've been provided with.
It comes about the controller I have to use for it.
I have few other questions in mind too.
But let start with the description and data first.
It's laced in a 28" (700C) wheel and has the designation: SWXK36V250W185K, followed by: 1301270034.
It's a bare wheel only, with no other accessories.
Motor has 9-pin connector (male) with three of them bigger/thicker and the rest of six - thinner/smaller.
What I would need to ask is:
1. Kind of (cheaper) controller that is able to work with;
2. Eventual availability of a head(+tail) lights connector on this controller;
3. Option to use the hall sensors, but also to go without them too.
4. Scheme/diagram of this 9-pin connector, as the cable is too short and it must be made longer.
5. I'm unclear also whether this motor can be used with a throttle or with a PAS. Any experience ? I prefer to make it able to go with throttle, say on the left hand side. (Which throttle I need?)
6. Battery should be a 10S3P or 4P, with Panasonic 18650PF cells, but it's still in project. I'm looking for a BMS for it too. I plan to use the VRUZEND kit for assembly, which requires no soldering. Any advice here will be also appreciated.
TNX for your input !
PS. If I'm in the wrong topic, let a Mod to move the post, please.