We have two motors BBS02 750w 48v, which I have configured for a better drive. But I have a problem where I don't know how to configure the settings. When I'm on the bike pedaling and I stop pedaling for just a moment, it takes quite some time for the "help" to turn on. This is really frustrating espacially when driving up a hill.
When I'm testing the settings on the bike stand and I quickly turn the pedal (for half a turn) the help turns on instantly, but if I turn the pedal slowly, then it takes longer for the help to turn on (ca four turns).
This are my current settings:
When I'm testing the settings on the bike stand and I quickly turn the pedal (for half a turn) the help turns on instantly, but if I turn the pedal slowly, then it takes longer for the help to turn on (ca four turns).
This are my current settings:
