BionX

General Discussion about electric bicycles.
Stilo77   1 mW

1 mW
Posts: 19
Joined: Mar 18 2019 5:40am

Re: BionX

Post by Stilo77 » Apr 13 2019 10:36am

Thank You!

Stilo77   1 mW

1 mW
Posts: 19
Joined: Mar 18 2019 5:40am

Re: BionX

Post by Stilo77 » Apr 15 2019 11:53am

Cephalotus wrote:
Apr 13 2019 4:57am


If you have a BionX DS3 display the latest official version is 4.0

The BionX DS3 display has another plugin than G2 display and BionX interface box.So you can't connect this interface with DS3 display?Thanks
Attachments
DS3 display.jpg
DS3 display.jpg (3.4 KiB) Viewed 561 times
G2 display.jpg
G2 display.jpg (5.29 KiB) Viewed 561 times
My interface.jpg
My interface.jpg (5.36 KiB) Viewed 561 times

Cephalotus   10 kW

10 kW
Posts: 603
Joined: Jun 18 2012 12:27pm

Re: BionX

Post by Cephalotus » Apr 17 2019 12:22am

RC3+DS3 and G2 are not compatible. You also need deifferent firmware versions in the motor for each.
For 48V batteries you can use the hybrid version 115 on both. Batteries with lower nominal voltage than 48V are not compatible with RC3+DS3

Stilo77   1 mW

1 mW
Posts: 19
Joined: Mar 18 2019 5:40am

Re: BionX

Post by Stilo77 » Apr 17 2019 12:57am

I understand.The RC3+DS3 has compatible bionx interface?My interface is this one:
Attachments
My interface.jpg
My interface.jpg (5.36 KiB) Viewed 537 times

Cephalotus   10 kW

10 kW
Posts: 603
Joined: Jun 18 2012 12:27pm

Re: BionX

Post by Cephalotus » Apr 17 2019 2:33am

Stilo77 wrote:
Apr 17 2019 12:57am
I understand.The RC3+DS3 has compatible bionx interface?My interface is this one:
Yes, your BIB2 is compatible to any BionX component

Stilo77   1 mW

1 mW
Posts: 19
Joined: Mar 18 2019 5:40am

Re: BionX

Post by Stilo77 » Apr 17 2019 12:08pm

Cephalotus wrote" Yes, your BIB2 is compatible to any BionX component"

But is not good the BIB2 s plugin with DS3 plugin.
Attachments
DS3 display.jpg
DS3 display.jpg (3.4 KiB) Viewed 519 times
My interface.jpg
My interface.jpg (5.36 KiB) Viewed 519 times

Stilo77   1 mW

1 mW
Posts: 19
Joined: Mar 18 2019 5:40am

Re: BionX

Post by Stilo77 » Apr 17 2019 1:31pm

I dont have DS3 display, only I have G1 and G2 displays.I don't know how the DS3 display end his plugins looks like in reality. :?

Cephalotus   10 kW

10 kW
Posts: 603
Joined: Jun 18 2012 12:27pm

Re: BionX

Post by Cephalotus » Apr 17 2019 5:09pm

DS3 connects via 4 pin connector to the RC3.

RC3 uses the (for BionX) typical Hirose30 connectors for its CAN bus system. So you connect DS3 via RC3 to the BIB2.

Couldn't find a picture online so I made you one:
BionX_RC3_System.jpg
Cable to the left is for braking sensor.

Stilo77   1 mW

1 mW
Posts: 19
Joined: Mar 18 2019 5:40am

Re: BionX

Post by Stilo77 » Apr 19 2019 9:00am

Cephalotus wrote:
Apr 17 2019 5:09pm

Couldn't find a picture online so I made you one:
Thank you very much!

pvn1012   1 µW

1 µW
Posts: 1
Joined: Apr 24 2019 8:24am

Re: BionX

Post by pvn1012 » Apr 24 2019 8:30am

When downloading the bbi software from this link: https://www.file-upload.net/download-13 ... e.zip.html to my mac I did get a message from AVG that the download was infected by a virus (see picture).

Can you attach send me the software by an other way? Can you attach this to the thread? Or send it with wetransfer.com to my email account or ???

Thanks!!!
Attachments
Schermafbeelding 2019-04-24 om 15.22.30.png

Cephalotus   10 kW

10 kW
Posts: 603
Joined: Jun 18 2012 12:27pm

Re: BionX

Post by Cephalotus » Apr 28 2019 5:51am

It's a self extracting file, maybe this is the reason why it is blocked.

I can not comment on the file hoster. I have no experience with those

Stilo   100 µW

100 µW
Posts: 9
Joined: Sep 08 2018 5:56am

Re: BionX

Post by Stilo » May 01 2019 6:11am

Cephalotus wrote:
Apr 13 2019 5:50am
As far as I know BionX software wants to update 30 days after installation. This is not possible any more because Bionx servers are down.
Therefor the BionX needs a faked date, based on the installation time hidden in the license file bbi.db.

I can only use it when I set back that date manually and use my PC offline.

I use a bit older license version, so I may date varies from the date you need to use for that version, at least this is what I believed. I assume that you have to set the date for this version to somewhere around November 2018.

Your PC still uses the actual date and the software works?

If so, I don't know why :-)
Hi Cephalotus!

I tried to use the program online and it worked perfect! First updated itself and then it updated the console, motor and battery firmware.

nantucket101   1 µW

1 µW
Posts: 4
Joined: Jul 31 2019 11:30am

Re: BionX

Post by nantucket101 » Jul 31 2019 6:21pm

Hi folks, apologies for the potentially dumb questions. I'm talking to someone who has the USB BiB interface about possibly getting my equipment unlocked. Would the uploaded offline license / debug mode let you unlock the 20mph limit? Or is that not possible without using 3rd party software/3rd party unlock methods? This is for a 2016 P 350 DV (gen 2 display i think)

Thanks!

Update: I eventually figured it out. All you need for a G2 console is the BBi2 software, a bbi cable, debug mode, and this very important parameter:

console.assist.maxSpeedFlag = 0

Post Reply