9 pin motor cable connector

I'm looking for a 9pin connector for phase hall wires that can carry 20a
Any recommendations?
I'd like to be able to mount one half of the connector like a socket on a enclosure where the cabling exits the axle of the hub motor
Ithe connecter can be 20mm in diameter max

20mm Max Diam for 9 pins. 3 of which need to carry 20amps...thats fairly tight. You would have more commercial options if you split it into two plugs (halls /phases) or gave yourself more room. I haven't google images (you can do that), but something like the bafang motor cable (also used by others) plug might do it, although 20 amps for any length of time might get it a bit hot, but it would be OK for short peaks.

Just realized its only 8 but that'd do halls and phase (but not temp)

or https://www.ebikes.ca/learn/connectors.html#higo-l10