This is a project that I've been wanting to do for a long time, a virtual motor dyno that from just a few measurements enables us to plot efficiency map, total losses, copper losses, core losses and output power
I made this intended for smaller motors for electric skateboards, but problems with the current measurement at low values in the VESC controllers that most of us use are causing a bit of a headache
Anyways, think this will be use full for hub motors and all that
Cheers
This are the examples using a 6355 190Kv motor, takes it with a grain of salt given the problems with current measurement I'm having
A few more details here
https://forum.esk8.news/t/esk8-motor-dy ... ious/33798
- TorqueBoards 6355 190 Kv - Copper Losses.png (113.49 KiB) Viewed 333 times
- TorqueBoards 6355 190 Kv - Core Losses.png (94.53 KiB) Viewed 333 times
- TorqueBoards 6355 190 Kv - Efficiency Map.png (177.47 KiB) Viewed 333 times
- TorqueBoards 6355 190 Kv - Output Power.png (200.28 KiB) Viewed 333 times
- TorqueBoards 6355 190 Kv - Total Losses.png (124.86 KiB) Viewed 333 times
https://drive.google.com/file/d/1HNUhrT ... sp=sharing