ninetyeighter
100 µW
- Joined
- Jul 12, 2021
- Messages
- 8
Hi all,
I am connecting to my Sevcon Gen4 2 using an Arduino, Seeed Studio Can Bus Shield, and TwizyCfg (with some slight modifications). I am going through the CANOpen OD and trying to find something that will let me output/export all of the settings. I found some stuff on the 0x1010 (STORE) command, but am unsure how it works and I don't want to risk overwriting anything.
I saw that the SevCon DVT software has a way to save the DCF. Any idea how to do this?
Thanks!
I am connecting to my Sevcon Gen4 2 using an Arduino, Seeed Studio Can Bus Shield, and TwizyCfg (with some slight modifications). I am going through the CANOpen OD and trying to find something that will let me output/export all of the settings. I found some stuff on the 0x1010 (STORE) command, but am unsure how it works and I don't want to risk overwriting anything.
I saw that the SevCon DVT software has a way to save the DCF. Any idea how to do this?
Thanks!