This is version 1. Once perfected it will be much more optimized.toolbag wrote:Have you looked at the loop inductance from that standoff layout? I started with something like that, but then I saw that the loop inductance from my loop (which was much smaller in area than what I'm seeing here) was an order of magnitude more than the ESL of the CAP .
The cap was not my first choice but after building a big part of all of this I found these caps and with the next revisions I will both get the cap optimized for the controller and the controller layout for the cap.
Also remember the Negative (bottom where the longest lugs run) has 3 stand offs evenly spaced out and are all connected to the same plate so that cuts resistance and inductance down by 3x from just 1 stand off.