Adaptto mini-E Throttle and PAS..

Electric Motors and Controllers
Post Reply
joe535   1 mW

1 mW
Posts: 16
Joined: Sep 03 2015 12:08pm
Location: Germany

Adaptto mini-E Throttle and PAS..

Post by joe535 » Sep 04 2016 11:50pm

Hi,

just got an idea. The mini-E (and the others as well, I guess), does not have an input for torque-sensor.
It offers PAS input to enable or disable the motor, so far so good.

Now what would be if iI connect a torques-sensor to the throttle-input? If the sensor produces
an analogue signal similar to the throttle, it should work...

Did anybody ever try this?

Joe

atomek1000   100 W

100 W
Posts: 108
Joined: Nov 08 2014 6:00pm
Location: Poland

Re: Adaptto mini-E Throttle and PAS..

Post by atomek1000 » Oct 12 2016 4:50am

Definately doable but what torque sensor you have in mind? There are not many on the market..

First thing that comes to my mind is to use this bb http://www.ebikes.ca/shop/ebike-parts/t ... m-114.html and adjust throttle values in adaptto to match output voltages of thos sensor. Should be good.

Post Reply