Adaptto mini-E Throttle and PAS..

Hi,

just got an idea. The mini-E (and the others as well, I guess), does not have an input for torque-sensor.
It offers PAS input to enable or disable the motor, so far so good.

Now what would be if iI connect a torques-sensor to the throttle-input? If the sensor produces
an analogue signal similar to the throttle, it should work...

Did anybody ever try this?

Joe

Definately doable but what torque sensor you have in mind? There are not many on the market..

First thing that comes to my mind is to use this bb http://www.ebikes.ca/shop/ebike-parts/torque-sensors/tdcm-114.html and adjust throttle values in adaptto to match output voltages of thos sensor. Should be good.