Lynxx E-chainsaw inrunner, $170 157-Kv

spinningmagnets

Moderator
Staff member
Joined
Dec 21, 2007
Messages
12,951
Location
Ft Riley, NE Kansas
http://www.etotheipiplusone.net/?p=4187

hfcs25-mid.JPG


The article is vague about some of the things I want to know. The stock controller is only ON/OFF. The motor does not have halls. Similar to GNG, but smaller.

Inrunner
brushless
12mm shaft
50mm rotor diameter
32mm wide stator lamination stack
6 magnets
9 coils
factory airfan on shaft
Samsung 25R cells included (20A ea, pack is 10S/1P)

He concludes that it will likely be more powerful than a 63mm diameter RC outrunner, but less powerful than the 80mm dia RC motors.
 
Back
Top