I was planning to build a custom dashboard for the Sevcon Gen4 Size6 controller by reading the CAN messages. However, I don't have access to the DVT software and therefore can't customize messages. I am stuck with the settings I have. Is there any way to decipher these frames? If not, I have to resolve with a less elegant solution.
These are taken from the bench test. No throttle or anything. I am mostly interested on RPM, Power, Current and Voltage.
"ID (hex)";"DLC";"Data (hex)"
" 80";"0";""
"286";"8";"00 00 00 00 12 00 FE FF"
"339";"8";"00 00 00 00 00 00 9A 03"
"173";"8";"D4 7D 2A 01 25 02 24 00"
"156";"7";"FD 05 21 00 00 00 00"
"279";"8";"00 00 00 00 00 00 00 00"
" 80";"0"
"286";"8";"00 00 00 00 FC FF F8 FF"
"339";"8";"00 00 00 00 00 00 9A 03";
"173";"8";"D4 7D 2A 01 25 02 24 00"
"156";"7";"FD 05 21 00 00 00 00"
"279";"8";"00 00 00 00 00 00 00 00"
BR
These are taken from the bench test. No throttle or anything. I am mostly interested on RPM, Power, Current and Voltage.
"ID (hex)";"DLC";"Data (hex)"
" 80";"0";""
"286";"8";"00 00 00 00 12 00 FE FF"
"339";"8";"00 00 00 00 00 00 9A 03"
"173";"8";"D4 7D 2A 01 25 02 24 00"
"156";"7";"FD 05 21 00 00 00 00"
"279";"8";"00 00 00 00 00 00 00 00"
" 80";"0"
"286";"8";"00 00 00 00 FC FF F8 FF"
"339";"8";"00 00 00 00 00 00 9A 03";
"173";"8";"D4 7D 2A 01 25 02 24 00"
"156";"7";"FD 05 21 00 00 00 00"
"279";"8";"00 00 00 00 00 00 00 00"
BR