Hybrid Motor Design

wracing

10 µW
Joined
Dec 2, 2015
Messages
5
Guys,

My hybrid project is progressing well, i have been testing with a Remy HVH250. The time has come for packaging and i cant make it all fit! I have been forced to design a custom motor that will fit in the space that i have. Please see the design below and feel free to comment.

Thanks

James

The stator is 118mm Outside diameter with 24 slots. the total lamination length is 270mm
44074972_10156471657961839_1662384722757550080_n.jpg


The winding configuration is delta with 4 pole pairs
44183188_10156471671021839_1052214889566699520_n.jpg


Flux Density Analysis
44085543_10156471676746839_2545808780570918912_n.jpg


Static Results
44074947_10156471679431839_5828018372947738624_n.jpg
 
Back
Top