Magura MT-7 E (w/ brake regeneration output)

Place for dealers to post items for sale.
Post Reply
s.t.electricmiles
1 µW
1 µW
Posts: 1
Joined: Apr 25, 2016 10:42 pm

Magura MT-7 E (w/ brake regeneration output)

Post by s.t.electricmiles » Apr 26, 2016 10:48 am

https://www.magura.com/en/bike/products ... emein.html

Had a few leftover unused -
IMG_0001.jpg
Magura Mt7-e
IMG_0004.jpg
Sensor
IMG_0004.jpg (213.71 KiB) Viewed 278 times
IMG_0006.jpg
203mm rotor
This is the E verision of the MT7 with a 2000mm black hose, it has an electronic sensor for electric bicycles for brake regeneration and other inputs. It will however also work with non electric bicycles. comes Magura with 203mm rotor

MAGURA have come up with a groundbreaking new solution for the MT7e: a mechanical switch located right inside the brake lever. It activates the brake light even before the brakes actually bite, and this will also be useful for power assist systems with a regenerative braking mode, so that it can be engaged as quickly as possible. And should a crash occur, exchanging the unit is much cheaper than with our competitors, because the switch is located within the brake lever housing.”

280$ w/ free shipping to US
PayPal only

PM me

bootune
1 mW
1 mW
Posts: 10
Joined: Nov 01, 2015 3:47 pm

Re: Magura MT-7 E (w/ brake regeneration output)

Post by bootune » Apr 26, 2016 7:54 pm

Very nice, is the sensor removable?

Ohbse
10 kW
10 kW
Posts: 765
Joined: Dec 26, 2013 5:15 pm
Location: Auckland, New Zealand

Re: Magura MT-7 E (w/ brake regeneration output)

Post by Ohbse » Apr 27, 2016 4:52 am

These look very nice.. they do seem quite difficult to find outside of europe and their website is very frustrating to navigate

bootune
1 mW
1 mW
Posts: 10
Joined: Nov 01, 2015 3:47 pm

Re: Magura MT-7 E (w/ brake regeneration output)

Post by bootune » Apr 27, 2016 3:59 pm

Hello Ohbse, Yeah you're right i've search myself on their site and on google can can't seem to find anything...its giving me an idea to try and make it myself with a hall sensor and a magnet.

FL bomber
10 W
10 W
Posts: 99
Joined: Feb 12, 2016 12:57 pm

Re: Magura MT-7 E (w/ brake regeneration output)

Post by FL bomber » Jun 07, 2016 10:29 am

280 Is that for a pair front and rear?

User avatar
DanGT86
10 kW
10 kW
Posts: 604
Joined: Sep 06, 2012 9:18 pm
Location: Saint Louis MO

Re: Magura MT-7 E (w/ brake regeneration output)

Post by DanGT86 » Jun 07, 2016 4:06 pm

How slim is the part of the caliper and one pad that go behind the rotor? Trying to figure out if it will fit between a rotor and side cover of a hub motor. Basically asking for the measurement shown here in red. Thanks.
Image

liamcaff
10 kW
10 kW
Posts: 533
Joined: Feb 17, 2013 6:21 pm
Location: Dublin

Re: Magura MT-7 E (w/ brake regeneration output)

Post by liamcaff » Jun 23, 2016 1:51 pm

I can't find anything on a Magura MT-7 E.... but there's a Magura MT-5 E...

http://www.magura.com/en/components/bik ... ge/?p=2594

ralf
1 µW
1 µW
Posts: 1
Joined: Feb 14, 2017 10:59 pm

Re: Magura MT-7 E (w/ brake regeneration output)

Post by ralf » Feb 17, 2017 11:43 am

it is very difficult to find the magura mt 7 e. I contacted the manufacturer in Germany. there are actually two versions of the mt 7 e. the difference is the integrated switch. one version is equipped with an opener switch, the other with an closer. available as special order only for 115 euro.

exe
1 W
1 W
Posts: 64
Joined: Apr 04, 2012 10:19 am
Location: Victoria BC Canada and Seattle WA

Re: Magura MT-7 E (w/ brake regeneration output)

Post by exe » Feb 18, 2017 2:01 am

ralf wrote:it is very difficult to find the magura mt 7 e. I contacted the manufacturer in Germany. there are actually two versions of the mt 7 e. the difference is the integrated switch. one version is equipped with an opener switch, the other with an closer. available as special order only for 115 euro.
115 Euro for the lever or the entire brake? The MT7 itself without the "e" cost more than that, it is listed on Magura.com at 219.90 Euro.

vex_zg
100 W
100 W
Posts: 176
Joined: Mar 06, 2016 6:07 pm

Re: Magura MT-7 E (w/ brake regeneration output)

Post by vex_zg » Jul 19, 2017 2:17 pm

DanGT86 wrote:How slim is the part of the caliper and one pad that go behind the rotor? Trying to figure out if it will fit between a rotor and side cover of a hub motor. Basically asking for the measurement shown here in red. Thanks.
Image
FYI I have re-asked this question

https://endless-sphere.com/forums/viewt ... =2&t=89592

vex_zg
100 W
100 W
Posts: 176
Joined: Mar 06, 2016 6:07 pm

Re: Magura MT-7 E (w/ brake regeneration output)

Post by vex_zg » Jul 20, 2017 3:00 am

ralf wrote:it is very difficult to find the magura mt 7 e. I contacted the manufacturer in Germany. there are actually two versions of the mt 7 e. the difference is the integrated switch. one version is equipped with an opener switch, the other with an closer. available as special order only for 115 euro.
ralf, do you have a contact name or channel in Magura regarding MT7E ? I tried contacting them but their customer service is now denying the existence of MT7E. Perhaps not all customer agents are up to date.

vex_zg
100 W
100 W
Posts: 176
Joined: Mar 06, 2016 6:07 pm

Re: Magura MT-7 E (w/ brake regeneration output)

Post by vex_zg » Jul 20, 2017 9:48 am

vex_zg wrote:
ralf wrote:it is very difficult to find the magura mt 7 e. I contacted the manufacturer in Germany. there are actually two versions of the mt 7 e. the difference is the integrated switch. one version is equipped with an opener switch, the other with an closer. available as special order only for 115 euro.
ralf, do you have a contact name or channel in Magura regarding MT7E ? I tried contacting them but their customer service is now denying the existence of MT7E. Perhaps not all customer agents are up to date.
update: customer support from Magura claims MT7 should work with MT5E lever. I will investigate this further. I can't find this lever for purchasing anywhere but it still would cost at least $50 which makes MT7E a bit too much if one has to purchase the lever separately.

User avatar
chucho
1 kW
1 kW
Posts: 429
Joined: Dec 15, 2012 1:58 pm
Location: EU Paradise; Sp

Re: Magura MT-7 E (w/ brake regeneration output)

Post by chucho » Jul 21, 2017 6:42 pm

I was in magura stand on the Taipei International Cycle Show this year and asked if they would be doing a MT-7 E version. And they told me that was not on their plans for the close future.
So this is a bit strange. :?
Someone who does not doubt is a danger to the rest

9c+24slipo+60A lyen12fets+CAv3+26"hookworms=Fun commute
Cargobike+9c+13s33Ah=Fun transport
Kona entourage+ gng+ 40A lyen12fets+CAv3=Fun crosscountry
Flux+adaptto Max-e+Mxusv2+19" shinko= Monster fun Any Way

vex_zg
100 W
100 W
Posts: 176
Joined: Mar 06, 2016 6:07 pm

Re: Magura MT-7 E (w/ brake regeneration output)

Post by vex_zg » Jul 22, 2017 2:53 am

chucho wrote:I was in magura stand on the Taipei International Cycle Show this year and asked if they would be doing a MT-7 E version. And they told me that was not on their plans for the close future.
So this is a bit strange. :?
Well on the picture in the first post of this thread the MT7E lever does in fact look like MT5E lever. So it's little effort for Magura to make MT7E, just some logistics.

Anyway since I could not find MT5E lever at reasonable cost (I found some for half of the cost of entire MT5E), I ordered both MT7 and MT5E. To see if it is possible to change levers. I also have the issue of unknown MT7/MT5 caliper dimension (there is an issue with hub motor-caliper clearance).

Also for the record MT4E and MT5E should have the same lever, but MT4E lever I also could not find anywhere, and MT4E is stated as not available for retail, only OEMs.

Post Reply