**SOLD** LMX 161 off road dirt bike. Nearly new. £2600 or £1500 for frame and drive train kit

[brumbrum]

Bike now sold


**Updated to say I will sell the frame and drive train separately**

My LMX 161 bike is up for sale.
Please note* This is the Off-Road version and not power limited but does not have documents declaring it road worthy.

Also note* It does have a 67v (16 series) 20ah lipo pack installed which i have been using for setting up and testing purposes. This can be sold with the bike as long as you can prove you know how to check the cells and that you understand the charging and discharging parameters. This is because the battery has no BMS. Otherwise it is sold without a battery. Consider the battery "free to the right buyer".

The bike comes with some new spare parts I've gathered.
2 sets of spare brake pads
4 extra different size rear sprockets
3 extra front small sprockets
A spare chain
A dual sport spare rear tire, nearly new, just removed from bike.
A 5 amp charger

With the present size sprockets the bike reaches around 45mph.
Peak power is 10,000watts
Nominal cruising power approx 3,000watts


The build thread and build video logs are here.... viewtopic.php?f=6&t=94074

Here are two walk around videos of me detailing all the components....
Part 1:

Part 2:


Price £2600 plus postage.

Sell to U.K or Europe. If U.K i can offer possible personal delivery if the buyer is within a couple of hours of S.Wales and will pay petrol cost.
You are welcome to pick up and try before you buy.

Thanks
Andrew.

[litespeed]

Nice bike....too bad it’s on the wrong side of the pond for me!

Tom

[brumbrum]

Nice bike....too bad it’s on the wrong side of the pond for me!

Tom

Yep, with mostly U.S users on the forum, my audience is quite limited. I'm looking into getting it made road legal if i dont find a buyer. No rush. The bike owes me over £4,000.

I will try and get some photos up - (if the sun sun comes out any day soon).

[brumbrum]

Here’s a table of predicted speeds according to what size sprockets are used on the rear. The table also Shows the variations created when either a 12t or 14t sprocket is used on the motor drive shaft at the front. Speeds are In kph. This table was made by my forum buddy Merlin

[brumbrum]

[Jonboy]

Very nice.. first time iv' seen it all done And .. MINT

[brumbrum]

Very nice.. first time iv' seen it all done And .. MINT

Thanks mate. I’m thinking now of stripping the forks, brakes, bars etc off it for upgrade to the Specialized bike I have my eyes on. Maybe sell the frame and drive train as I bought it from LMX. When tallying up the money spent its difficult to let go of of it all especially because a lot of it is still pretty much brand new. I’ve had some interest on it, but no one willing to part with their money as yet.

[Merlin]

if you stay offroad i would strip it. i know that very well....you buy something...watch only a few times about it and then you only get half of the price.
better put the parts in your garage and use them later.

cheaper for the buyer and mostly/maybe they have allready parts needed or may want other parts.

(jeee....what a sentence)

[devo1223]

I bet you could ship the frame across the pond at a reasonable cost. If so, I'd be interested.....

[brumbrum]

I bet you could ship the frame across the pond at a reasonable cost. If so, I'd be interested.....

I’m currently negotiating the sale with another forum member. If it falls through I will contact you.
Andrew

[brumbrum]

For anyone interested in just buying the frame kit, this is what you get....
Aluminium frame, aluminium swingarms and linkage, headset, foot pegs, bash guard, seat and all plastics, battery box. All nuts n bolts n covers etc.
It would also include the drive-train: lmx motor, front sprocket, rear sprocket, chain, and the rear wheel laced into the lmx hub. I have a couple a spare sprockets and a chain you can have too.

£1500.
You pay postage. EU or U.S approx £130

[brumbrum]

Bike now sold and off to the Czech Republic!