Page 8 of 8

Re: ASI BAC Controllers Worldwide Vendor

Posted: Aug 14 2021 12:05pm
by xenodius
Tiber wrote:
Aug 13 2021 11:15am

Would the BAC2000 be sufficient? The 4000 is out of my price range for now.
I have a BAC8000 and a QS205. Personally I would not use less than a 4000, it really is pretty well matched for the QS205. The biggest reason I like having an 8000 over the 4000 is the phase amps-- I've got upgraded phasewires, statorade, and hubsinks on my QS205 and while 450 is a very respectable peak phase current there have been times when I've enjoyed being able to crank the phase amps to 600 and watch the douche-canoes in supercars stop showing off to gawk at the 'bicycle' that just outpaced their six-figure midlife crisis... or to show off acceleration when people ask about it. 8) Technically my QS205 saturates around 220 phase amps but I've noticed 450 amps is about the point at which I notice it starts heating up much faster. I've only used 600 in short bursts.

I use my open-source Pi display to switch between power profiles on the fly with a 3-position switch, honestly if it wasn't for that and my motor mods I'd probably have been better off with a BAC4000 and sticking to 450 phase. :thumb:

Re: ASI BAC Controllers Worldwide Vendor

Posted: Aug 17 2021 2:33pm
by Audisport09
Another BAC4000 happy customer, thank you Martin. Fast delivery and great support. ASI is the t*ts!

Re: ASI BAC Controllers Worldwide Vendor

Posted: Aug 20 2021 9:22am
by martinmertik
Audisport09 wrote:
Aug 17 2021 2:33pm
Another BAC4000 happy customer, thank you Martin. Fast delivery and great support. ASI is the t*ts!
Thank you :D

Re: ASI BAC Controllers Worldwide Vendor

Posted: Aug 23 2021 7:07am
by Macaiah
I really want to purchase a BAC4000 OR BAC8000, but I need it wired for a Cycle Analyst V3 and anti-theft.

Is this something that can be done?

Sent from my SM-T860 using Tapatalk



Re: ASI BAC Controllers Worldwide Vendor

Posted: Aug 25 2021 1:38am
by martinmertik
Macaiah wrote:
Aug 23 2021 7:07am
I really want to purchase a BAC4000 OR BAC8000, but I need it wired for a Cycle Analyst V3 and anti-theft.

Is this something that can be done?

Sent from my SM-T860 using Tapatalk
Hey,
yes, no problem. Write me to info@bull-bikes.si and we can talk further.

Best regards

Re: ASI BAC Controllers Worldwide Vendor

Posted: Sep 18 2021 12:40pm
by msim
Any update on availability of BAC855. Last I emailed they were out of stock.

Re: ASI BAC Controllers Worldwide Vendor

Posted: Sep 22 2021 6:00am
by martinmertik
msim wrote:
Sep 18 2021 12:40pm
Any update on availability of BAC855. Last I emailed they were out of stock.
Hey,
I'm getting them shortly, could you just send me an email so I can notify you when they are ready to ship out.

Regards

Re: ASI BAC Controllers Worldwide Vendor

Posted: Sep 22 2021 11:47am
by markisha
Hi all, can anyone give me a suggestion where I can get BBSHD harness for ASI BAC855 in EU, preferably.

Thanks!

Best regards,

Re: ASI BAC Controllers Worldwide Vendor

Posted: Sep 22 2021 3:59pm
by aztecsurf
Did anyone ever find a copy of the Bacdoor software we can get a hold of?

Re: ASI BAC Controllers Worldwide Vendor

Posted: Oct 13 2021 5:35pm
by Ziip0
Hello,

I would like to change my Adaptto Max-E 14kW controller (dead) for my NYX bike.

I got a QS 205 3000W.

I want same power, or even more, something that really kicks some ***

Motor change is an option too.

Any suggestions ?

Thanks.