18 FET Low RDS MOSFET Overclocker Ready LYEN Controller $199

Place for dealers to post items for sale.

Re: 18 FET Low RDS MOSFET Overclocker Ready LYEN Controller

Postby Lyen » Mon May 18, 2015 2:11 pm

Clarified with Louis. Thanks!
Last edited by Lyen on Tue May 19, 2015 8:38 am, edited 1 time in total. View post history.
Items For Sale
Please sign up here and donate your marrow to save life.
User avatar
Lyen
10 kW
10 kW
 
Posts: 727
Joined: Fri Aug 17, 2007 1:26 am
Location: San Francisco, California, USA

Re: 18 FET Low RDS MOSFET Overclocker Ready LYEN Controller

Postby ohzee » Mon May 18, 2015 2:16 pm

Lyen you should change the url in your contact info from

Website:
http://www24.brinkster.com/lyen/beta

to

lyen.com

Just a suggestion. Hope you are doing well.
User avatar
ohzee
10 MW
10 MW
 
Posts: 2252
Joined: Wed Jul 20, 2011 1:13 pm
Location: Columbus Ohio USA

Re: 18 FET Low RDS MOSFET Overclocker Ready LYEN Controller

Postby markz » Sun Aug 30, 2015 1:40 pm

72V battery optimized (for higher or lower voltage & current such as 36V-100V, you may need to change the resistor network to avoid damage to the voltage regulator)
65A is the current rate (for higher current, you may need to beef up the trace, shunt, and reprogram it via the software)
Low voltage cut-off: 62.6v


Can I go down to a 60V battery and change the LVC in the programming of the controller without any mods?
What is the voltage range of the controller in stock form?
markz
10 GW
10 GW
 
Posts: 4094
Joined: Thu Jan 09, 2014 11:38 pm
Location: Alberta Canada

Re: 18 FET Low RDS MOSFET Overclocker Ready LYEN Controller

Postby alsmith » Sun Aug 30, 2015 3:45 pm

I've got both the 4110 (100V) ans 4115 (132V) Mk 2 18 FET controllers- both work at 36V and 72V for me with no changes for the different Voltages. It's worth letting Lyen know your intended Voltages if you're ordering in case there are changes he recommends.
User avatar
alsmith
100 kW
100 kW
 
Posts: 1172
Joined: Fri Dec 03, 2010 7:25 pm
Location: Northumberland, UK

Re: 18 FET Low RDS MOSFET Overclocker Ready LYEN Controller

Postby Krakajax » Sun Aug 30, 2015 7:40 pm

If the Lyen Controller is passed information from the Cycle Analyst v3 will the settings be used from the CA or the Lyen Controller? In other words, which profile settings take priority when both the CA and Lyen are used in a system?
Krakajax
1 µW
1 µW
 
Posts: 1
Joined: Sun Aug 30, 2015 7:17 pm

Re: 18 FET Low RDS MOSFET Overclocker Ready LYEN Controller

Postby markz » Sun Aug 30, 2015 7:48 pm

I already have the Lyen 18fet controller, I guess it wont harm anything if I go lower just wondering if performance is hindered is all in the controller itself.

However the statement says a lot and I understand 36V, and 100V, but if I am only going down from 72 to 60 shouldnt be any issues should there?
72V battery optimized (for higher or lower voltage & current such as 36V-100V, you may need to change the resistor network to avoid damage to the voltage regulator)
65A is the current rate (for higher current, you may need to beef up the trace, shunt, and reprogram it via the software)
Low voltage cut-off: 62.6v
Last edited by markz on Sun Aug 30, 2015 7:49 pm, edited 1 time in total. View post history.
markz
10 GW
10 GW
 
Posts: 4094
Joined: Thu Jan 09, 2014 11:38 pm
Location: Alberta Canada

Re: 18 FET Low RDS MOSFET Overclocker Ready LYEN Controller

Postby alsmith » Mon Aug 31, 2015 6:39 pm

I've had none. I just have my low voltage set for the 36V which I use most of the time, and monitor the capacity when using 72V (I have a CA).
User avatar
alsmith
100 kW
100 kW
 
Posts: 1172
Joined: Fri Dec 03, 2010 7:25 pm
Location: Northumberland, UK

Re: 18 FET Low RDS MOSFET Overclocker Ready LYEN Controller

Postby lionelt » Sun Feb 05, 2017 5:15 am

HI

I ve a 18fet Lyen with 10AWG phase and Battery, very smooth and power with 18S lipo 40Ah 75.6v t 70 A (5000w) on mxus V4 4T (on vector frame 26")

my setting is 65A bat and 120A phases, and speed is enough 75km/h (MTB) but i hope more punch at starting .... (cannot do little wheeling)

do you think i can increase phase current to 150A or more and not exceed 70A on bat, neither overheat my motor

other questions
I do not have CA (and don't want, i've wattmeter) but I would like to be able to read the temperature of the sensor KTY from the mxus V3, do you know a small circuit that would make it do it (LCD/Led panel) ?

Nobody has ever developed a mobile application (android) for this controller with a bluetooth adapter?

Thx
Last edited by lionelt on Sun Feb 05, 2017 5:16 am, edited 1 time in total. View post history.
Vector MXUS V3
18FET Lyen
18S 40AH LIPO
---------------------------
E-Chopper Nirve Switchblade
GM MP2 front wheel
GT 130 Wattmeter
48V 12Ah LI-ION case
All electronic & battery inside bag in leather brown assorted with Seal and handle
Range 35 kms - Speed 40km/h no assist direct from handle throtle
User avatar
lionelt
10 mW
10 mW
 
Posts: 24
Joined: Thu Aug 20, 2015 5:11 am
Location: FR Haute Savoie (Alps)

Previous

Return to Items for Sale - New

Who is online

Users browsing this forum: mkaaskh and 8 guests