Doc's ULTIMATE TORQUE ARMS fit most of the frame UPDATE 2013

Place for dealers to post items for sale.
Baron   100 W

100 W
Posts: 197
Joined: Jun 15 2015 9:09pm
Location: Philadelphia, PA

Re: Doc's ULTIMATE TORQUE ARMS fit most of the frame UPDATE

Post by Baron » Feb 04 2017 11:21pm

Will "loctite metal" work well as an epoxy? It's about 3200psi vs. 3M DP420 4500psi.

I am making two torque arms for my genesis v2100, 1/4" thick steel, looks like I can get about 2 to 3 sq inches surface contact on each side.

User avatar
Doctorbass   100 GW

100 GW
Posts: 7428
Joined: Apr 08 2007 2:24am
Location: Quebec, Canada East
Contact:

Re: Doc's ULTIMATE TORQUE ARMS fit most of the frame UPDATE

Post by Doctorbass » Feb 05 2017 1:12am

Baron wrote:Will "loctite metal" work well as an epoxy? It's about 3200psi vs. 3M DP420 4500psi.

I am making two torque arms for my genesis v2100, 1/4" thick steel, looks like I can get about 2 to 3 sq inches surface contact on each side.

It should be enough. best is to cure it at higher temp like 60-70degree C.. for that youc an make your own DIY quick OVEN using cardboard box and hairdryer that you put the output into the box.


Doc
CURRENT PROJECT: 2WD duo MXUS/Max-E ebike 32kW
http://endless-sphere.com/forums/viewto ... =3&t=65764
-Fastest speed record 117 km/h on flat
-Fastest 1/4 mile@ 114km/h on flat and 16.316 sec
-Succeded to haul a 19200 pounds schoolbus!
113kmh Gianthttp://www.evalbum.com/3406
Mongoosehttp://www.evalbum.com/1947
YOUTUBE---https://m.youtube.com/user/Doctorbasss
http://twitter.com/DocbassMelancon
I speak FRENCH and english

ebike11   100 kW

100 kW
Posts: 1163
Joined: Nov 16 2013 8:01pm
Location: Korea

Re: Doc's ULTIMATE TORQUE ARMS fit most of the frame UPDATE

Post by ebike11 » Nov 12 2017 4:05pm

Hi do you still make these? If so anything for M16 axles?

User avatar
Doctorbass   100 GW

100 GW
Posts: 7428
Joined: Apr 08 2007 2:24am
Location: Quebec, Canada East
Contact:

Re: Doc's ULTIMATE TORQUE ARMS fit most of the frame UPDATE

Post by Doctorbass » Nov 12 2017 11:05pm

ebike11 wrote:Hi do you still make these? If so anything for M16 axles?

I dont make these anymore. Sorry

Doc
CURRENT PROJECT: 2WD duo MXUS/Max-E ebike 32kW
http://endless-sphere.com/forums/viewto ... =3&t=65764
-Fastest speed record 117 km/h on flat
-Fastest 1/4 mile@ 114km/h on flat and 16.316 sec
-Succeded to haul a 19200 pounds schoolbus!
113kmh Gianthttp://www.evalbum.com/3406
Mongoosehttp://www.evalbum.com/1947
YOUTUBE---https://m.youtube.com/user/Doctorbasss
http://twitter.com/DocbassMelancon
I speak FRENCH and english

cwah   10 GW

10 GW
Posts: 4208
Joined: Jul 24 2011 5:42am
Location: Between paris and london

Re: Doc's ULTIMATE TORQUE ARMS fit most of the frame UPDATE 2013

Post by cwah » Jun 05 2019 10:42am

I've got 2 pairs for sales for anyone interested:
https://www.gumtree.com/p/bicycles/hard ... 1342410610
Help me find my stolen electric brompton: http://bit.ly/1a0vbBC and Bosch Sinus B3 http://bit.ly/1eV0WQz

whereswally606   100 kW

100 kW
Posts: 1134
Joined: Jun 19 2011 2:11pm
Location: Cheshire, UK

Re: Doc's ULTIMATE TORQUE ARMS fit most of the frame UPDATE 2013

Post by whereswally606 » Jun 05 2019 11:13am

sent a message on gumtree for both. thanks
Distributing "Lebowski" FOC Controller PCB (Through hole) since 2016
Moped: Emax 110s 2009

whereswally606   100 kW

100 kW
Posts: 1134
Joined: Jun 19 2011 2:11pm
Location: Cheshire, UK

Re: Doc's ULTIMATE TORQUE ARMS fit most of the frame UPDATE 2013

Post by whereswally606 » Jun 05 2019 11:35am

money sent just in time before my phone battery died. :thumb:
Distributing "Lebowski" FOC Controller PCB (Through hole) since 2016
Moped: Emax 110s 2009

cwah   10 GW

10 GW
Posts: 4208
Joined: Jul 24 2011 5:42am
Location: Between paris and london

Re: Doc's ULTIMATE TORQUE ARMS fit most of the frame UPDATE 2013

Post by cwah » Jun 05 2019 11:36am

Sold
Help me find my stolen electric brompton: http://bit.ly/1a0vbBC and Bosch Sinus B3 http://bit.ly/1eV0WQz

Firstlobster   1 µW

1 µW
Posts: 1
Joined: Sep 02 2019 1:42pm

Re: Doc's ULTIMATE TORQUE ARMS fit most of the frame UPDATE 2013

Post by Firstlobster » Sep 05 2019 8:52am

Have you thought about releasing the CAD files for the torque arms on thingyverse or something?

Post Reply