Page 24 of 24

Re: Doc's ULTIMATE TORQUE ARMS fit most of the frame UPDATE

Posted: Feb 04 2017 11:21pm
by Baron
Will "loctite metal" work well as an epoxy? It's about 3200psi vs. 3M DP420 4500psi.

I am making two torque arms for my genesis v2100, 1/4" thick steel, looks like I can get about 2 to 3 sq inches surface contact on each side.

Re: Doc's ULTIMATE TORQUE ARMS fit most of the frame UPDATE

Posted: Feb 05 2017 1:12am
by Doctorbass
Baron wrote:Will "loctite metal" work well as an epoxy? It's about 3200psi vs. 3M DP420 4500psi.

I am making two torque arms for my genesis v2100, 1/4" thick steel, looks like I can get about 2 to 3 sq inches surface contact on each side.

It should be enough. best is to cure it at higher temp like 60-70degree C.. for that youc an make your own DIY quick OVEN using cardboard box and hairdryer that you put the output into the box.


Doc

Re: Doc's ULTIMATE TORQUE ARMS fit most of the frame UPDATE

Posted: Nov 12 2017 4:05pm
by ebike11
Hi do you still make these? If so anything for M16 axles?

Re: Doc's ULTIMATE TORQUE ARMS fit most of the frame UPDATE

Posted: Nov 12 2017 11:05pm
by Doctorbass
ebike11 wrote:Hi do you still make these? If so anything for M16 axles?

I dont make these anymore. Sorry

Doc

Re: Doc's ULTIMATE TORQUE ARMS fit most of the frame UPDATE 2013

Posted: Jun 05 2019 10:42am
by cwah
I've got 2 pairs for sales for anyone interested:
https://www.gumtree.com/p/bicycles/hard ... 1342410610

Re: Doc's ULTIMATE TORQUE ARMS fit most of the frame UPDATE 2013

Posted: Jun 05 2019 11:13am
by whereswally606
sent a message on gumtree for both. thanks

Re: Doc's ULTIMATE TORQUE ARMS fit most of the frame UPDATE 2013

Posted: Jun 05 2019 11:35am
by whereswally606
money sent just in time before my phone battery died. :thumb:

Re: Doc's ULTIMATE TORQUE ARMS fit most of the frame UPDATE 2013

Posted: Jun 05 2019 11:36am
by cwah
Sold

Re: Doc's ULTIMATE TORQUE ARMS fit most of the frame UPDATE 2013

Posted: Sep 05 2019 8:52am
by Firstlobster
Have you thought about releasing the CAD files for the torque arms on thingyverse or something?

Re: Doc's ULTIMATE TORQUE ARMS fit most of the frame UPDATE 2013

Posted: Mar 13 2020 3:31am
by ejonesss
from page 13 there are 2 images of the dimensional drawings so it may be possible for someone with machine shop to copy them.