I have three systems and some measuring boards left.
What it is?
My battery monitor consists of:
1x monitor unit with 2.1" colored tft display, sd card storage, 5Hz datalogger
multi language, programmable, 8-18V supply voltage, connector for garmin gps18x 5hz sensor
one required, price: 265€
connectbox (30€ - one required)):
connector plugs for the following sensors:
1x halleffect current meter (60€)
2x contact temperature (NTC) (each 7.50€)
1x IR temperature (45€)
measuringboxes (each 95€):
can measure 4-12s cells up to 6.10V per cell, maximum of 9boxes (108s) in serial, two 9pole connectors (to the connect box and to the next measuring box) and 13pole wire out (to the cells)
double measuring boxes are possible (4-24s each 165€), two 9pole connectors (to the connect box and to the next measuring box) and 25pole wire out (to the cells), double measuring box including connectbox +15€
will offer some % discount for complete packages:
1x monitor unit: 265€
1x combined double measuring box with connect box 180€
2x temperature contact sensor 15€
1x IR temperature sensor 45€
1x halleffect current sensor (100A, 200A...600A) 60€
my offer: 500€
measuring boxes can be used with linear DC590B board:http://www.linear.com/demo/DC590B
and the software from linear.
here are some pics: