cwah wrote: ↑
May 22, 2018 3:41 am
I keep having this error:
"POST Static Gate Test Outside Range"
It's very dangerous because this happens intently. Sometimes I'm in the middle of the road and there is a sudden power cut!!!
I need to restart the controller and sometimes it works, sometimes it doesn't!!
Anyone knows what's happening?
What is happening is the controller is measuring that when applying power, the phase wires are not shorted to something it shouldn't be. It is cutting power because it thinks that they are.
1. You have very dirty connectors that are bridging between the phases
2. You have a random short of your phasewires between something else (ground, another phase, etc), that is intermittent
3. Other determined with testing!
Check what the controller error is reporting for the actual voltages for the POST (add parameters under custom parameters #300 -> 308) and go from there. Also email firstname.lastname@example.org
for support there.