QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Place for dealers to post items for sale.
SlowCo   10 kW

10 kW
Posts: 918
Joined: Jan 05 2015 5:43pm
Location: The Netherlands

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by SlowCo » Mar 24 2018 3:45pm

DasDouble wrote:
Mar 24 2018 2:17pm
What should I do?! I also can´t bend the frame as it is an alloy frame which you can´t bend.
Why can't an alloy frame be bent? Aluminium gets brittle when bent several times but widening the dropout width by 5-8mm shouldn't be a problem.

User avatar
DasDouble   100 kW

100 kW
Posts: 1092
Joined: Jul 12 2015 1:35pm
Location: GERMANIA :D

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by DasDouble » Mar 24 2018 4:31pm

That´s just what he said. Seems like Im gonna have to sell his 1000 Watt 135mm QS motor and buy a 130mm one instead :cry: ......
20180308_102848.jpg
20180308_102848.jpg (52.74 KiB) Viewed 1627 times
"..the crazy kid exploring hipower ebike world ^^"
-Built own ebike: ✔
-Built own 3.2kWh LiIon battery (300Amps): ✔
-Overtake Porsche with own Ebike: ✔
-Take off with ebike: ✖

~14kW, 3.2kWh LiIon, QS 205 8ml ff, hubsink

User avatar
parabellum   10 MW

10 MW
Posts: 2056
Joined: Nov 19 2010 9:55am
Location: Dominican Republic, north.

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by parabellum » Mar 27 2018 10:51am

DasDouble wrote:
Mar 24 2018 4:31pm
That´s just what he said. Seems like Im gonna have to sell his 1000 Watt 135mm QS motor and buy a 130mm one instead
Yeh, those bolts will definitely destroy the wire.
If you do not want to spread frame, just flexing a little while inserting the wheel with washers (not bending actually), then there is other dirty mod I used successfully:
If you have enough axle length on the cassette side, you could lengthen the flat by grinding some material of the round axle section and shift the whole hub in the cassette side direction.
Hope it makes sense.

jaybee9   1 mW

1 mW
Posts: 12
Joined: Mar 27 2018 10:53am

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by jaybee9 » Mar 27 2018 2:09pm

I am interested in purchasing some new QS 205 V3 55H motors. Can anyone explain why there are a multitude of QS motor sites?

http://www.cnqsmotor.com/en
http://www.qs-motor.com
https://www.qsmotor.com

(Near as I can tell, qsmotor.com is the only one who carries the 55H.) Would prefer to purchase from a business in the US as it is easier due to constraints on my end.

Also, any general help on the purchasing process with QS? It seems like they prefer email? This is a little new to me...

JB

User avatar
minde28383   1 kW

1 kW
Posts: 382
Joined: Apr 02 2010 7:11am

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by minde28383 » Mar 27 2018 2:18pm

55H? Not 50H?
I got 55H in my scooter in 12inch rims but most ebikers have 50H in their bicycles.
I always use first one: cn.....
E-mail or skype.
Qs 205 hubs are sold by la bikes in your continent.

jaybee9   1 mW

1 mW
Posts: 12
Joined: Mar 27 2018 10:53am

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by jaybee9 » Mar 27 2018 3:02pm

minde28383 wrote:
Mar 27 2018 2:18pm
55H? Not 50H?
55H. See: https://www.qsmotor.com/product/4000w-car-motor/
minde28383 wrote:
Mar 27 2018 2:18pm
Qs 205 hubs are sold by la bikes in your continent.
Ok thanks I will check them out.

User avatar
minde28383   1 kW

1 kW
Posts: 382
Joined: Apr 02 2010 7:11am

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by minde28383 » Mar 27 2018 3:05pm

Afaik La ebikes sells motors and stuff for ebikes only.

jaybee9   1 mW

1 mW
Posts: 12
Joined: Mar 27 2018 10:53am

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by jaybee9 » Mar 27 2018 3:25pm

minde28383 wrote:
Mar 27 2018 3:05pm
Afaik La ebikes sells motors and stuff for ebikes only.
Yeah it is a little out of their wheelhouse but I'll give them a call.

User avatar
DasDouble   100 kW

100 kW
Posts: 1092
Joined: Jul 12 2015 1:35pm
Location: GERMANIA :D

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by DasDouble » Mar 27 2018 4:32pm

parabellum wrote:
Mar 27 2018 10:51am
DasDouble wrote:
Mar 24 2018 4:31pm
That´s just what he said. Seems like Im gonna have to sell his 1000 Watt 135mm QS motor and buy a 130mm one instead
Yeh, those bolts will definitely destroy the wire.
If you do not want to spread frame, just flexing a little while inserting the wheel with washers (not bending actually), then there is other dirty mod I used successfully:
If you have enough axle length on the cassette side, you could lengthen the flat by grinding some material of the round axle section and shift the whole hub in the cassette side direction.
Hope it makes sense.
Damn, Artur told me about that methode too via WhatsApp but I didn´t realized it till now. Thanks, I will ask the guy if he could check that out for me. Thanks a lot.

Cheers bro
"..the crazy kid exploring hipower ebike world ^^"
-Built own ebike: ✔
-Built own 3.2kWh LiIon battery (300Amps): ✔
-Overtake Porsche with own Ebike: ✔
-Take off with ebike: ✖

~14kW, 3.2kWh LiIon, QS 205 8ml ff, hubsink

User avatar
ridethelightning   1 MW

1 MW
Posts: 1778
Joined: Jul 21 2013 9:48pm

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by ridethelightning » Mar 28 2018 5:35am

make a sleave from pvc pipe that fits the axle, with a notch in just the right spot to guide the wires clear of the disc. add a few spacers, may also need a notch and all good. thats what i did.
i think bigboar had some pics in this thread somewhere-
https://endless-sphere.com/forums/viewt ... 5#p1165502

User avatar
macribs   1 GW

1 GW
Posts: 3481
Joined: Jul 22 2014 5:59pm

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by macribs » Mar 28 2018 9:42pm

jaybee9 wrote:
Mar 27 2018 3:02pm
minde28383 wrote:
Mar 27 2018 2:18pm
55H? Not 50H?
55H. See: https://www.qsmotor.com/product/4000w-car-motor/
minde28383 wrote:
Mar 27 2018 2:18pm
Qs 205 hubs are sold by la bikes in your continent.
Ok thanks I will check them out.
That motor is for car use. Are you maybe building a single sided swing arm? If so I wouldn't mind pics or back of the napkin drawing.

jaybee9   1 mW

1 mW
Posts: 12
Joined: Mar 27 2018 10:53am

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by jaybee9 » Mar 29 2018 6:13am

macribs wrote:
Mar 28 2018 9:42pm
That motor is for car use. Are you maybe building a single sided swing arm? If so I wouldn't mind pics or back of the napkin drawing.
Correct. I am not building an ebike. Still looking for a US distributor. No luck with drchopper8.

User avatar
DasDouble   100 kW

100 kW
Posts: 1092
Joined: Jul 12 2015 1:35pm
Location: GERMANIA :D

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by DasDouble » Mar 30 2018 11:47pm

For those who are interested: Super Cheap QS 1000Watt H35 hub motor, laced and spoked in 24" rim + Shimano 7speed for sale!

PRICE: 299USD + shipping from Germany

https://endless-sphere.com/forums/viewt ... 2#p1368862

PM me if interested or shoot me a whatsapp-message: +4917663895331
"..the crazy kid exploring hipower ebike world ^^"
-Built own ebike: ✔
-Built own 3.2kWh LiIon battery (300Amps): ✔
-Overtake Porsche with own Ebike: ✔
-Take off with ebike: ✖

~14kW, 3.2kWh LiIon, QS 205 8ml ff, hubsink

User avatar
QSMOTOR   100 W

100 W
Posts: 269
Joined: Sep 17 2013 3:14am
Location: QS Motor,Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Contact:

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by QSMOTOR » Apr 02 2018 9:57pm

Hi Guys,

This is Vito Ho from QSMOTOR, I just take over again to handle Endless Sphere today (from my workmate).
Will check all the thread and get back accordingly.
Sorry for the inconvenience.

Best Regards
Vito Ho -Powered by SIA
No QS Motor, No Super EVs!

-QS Motor/Taizhou Quanshun Motor Co., Ltd. -Taizhou SIA Trading Co., Ltd. (Export Dept.)
-International Sales -Tel: +86 0576 88551619 -Skype: vito-ho -QQ: 289026969
-WhatsApp/WeChat: +86 13656892883 -Email: vito@tzquanshun.com
-Official Web: http://www.cnqsmotor.com/en/
-Facebook: https://www.facebook.com/QSMotor.VitoHo

User avatar
QSMOTOR   100 W

100 W
Posts: 269
Joined: Sep 17 2013 3:14am
Location: QS Motor,Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Contact:

QS Motor will participate Canton Fair 2018 with GEELY

Post by QSMOTOR » Apr 03 2018 8:53am

QS Motor plan to attend Canton Fair 2018 with GEELY, in Guangdong, from 15th-19th Apr., 2017. Hall 12.1H05-06
Welcomed to visit our booth & please advise detailed date when you're convenient, thank you! We will make the schedule in advance, thank you for your support.
refer to below news.
http://www.cnqsmotor.com/en/article_read_822.html
Vito Ho -Powered by SIA
No QS Motor, No Super EVs!

-QS Motor/Taizhou Quanshun Motor Co., Ltd. -Taizhou SIA Trading Co., Ltd. (Export Dept.)
-International Sales -Tel: +86 0576 88551619 -Skype: vito-ho -QQ: 289026969
-WhatsApp/WeChat: +86 13656892883 -Email: vito@tzquanshun.com
-Official Web: http://www.cnqsmotor.com/en/
-Facebook: https://www.facebook.com/QSMotor.VitoHo

markz   100 GW

100 GW
Posts: 6137
Joined: Jan 09 2014 11:38pm
Location: Alberta Canada

Re: QS Motor will participate Canton Fair 2018 with GEELY

Post by markz » Apr 04 2018 4:51pm

QSMOTOR wrote:
Apr 03 2018 8:53am
.

Hello Vito, I do not see prices on your website (http://www.qs-motor.com)
I am interested in your motors rated 5kw and up for a custom EV project over the next 8 months. I am converting a very old Skidoo into electric with a motor I can swap out and use in a electric mid drive dirt bike (Suzuki DRZ 450)

Do you have a link to a website that has your prices on the QS motors?

Thank You

User avatar
QSMOTOR   100 W

100 W
Posts: 269
Joined: Sep 17 2013 3:14am
Location: QS Motor,Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Contact:

Re: QS Motor will participate Canton Fair 2018 with GEELY

Post by QSMOTOR » Apr 07 2018 9:57pm

markz wrote:
Apr 04 2018 4:51pm
QSMOTOR wrote:
Apr 03 2018 8:53am
.

Hello Vito, I do not see prices on your website (http://www.qs-motor.com)
I am interested in your motors rated 5kw and up for a custom EV project over the next 8 months. I am converting a very old Skidoo into electric with a motor I can swap out and use in a electric mid drive dirt bike (Suzuki DRZ 450)

Do you have a link to a website that has your prices on the QS motors?

Thank You
Thank you for your message.
http://www.qs-motor.com, is not our official web,

For details, please refer to below official web link.
http://www.cnqsmotor.com/en/

Best Regards
Vito Ho -Powered by SIA
No QS Motor, No Super EVs!

-QS Motor/Taizhou Quanshun Motor Co., Ltd. -Taizhou SIA Trading Co., Ltd. (Export Dept.)
-International Sales -Tel: +86 0576 88551619 -Skype: vito-ho -QQ: 289026969
-WhatsApp/WeChat: +86 13656892883 -Email: vito@tzquanshun.com
-Official Web: http://www.cnqsmotor.com/en/
-Facebook: https://www.facebook.com/QSMotor.VitoHo

quantumcloud509   100 mW

100 mW
Posts: 41
Joined: Aug 27 2016 3:23am
Location: WA

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by quantumcloud509 » Apr 18 2018 7:09pm

Email to Vito sent

User avatar
QSMOTOR   100 W

100 W
Posts: 269
Joined: Sep 17 2013 3:14am
Location: QS Motor,Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Contact:

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by QSMOTOR » Apr 18 2018 7:13pm

quantumcloud509 wrote:
Apr 18 2018 7:09pm
Email to Vito sent
Got it, thank you!
Vito Ho -Powered by SIA
No QS Motor, No Super EVs!

-QS Motor/Taizhou Quanshun Motor Co., Ltd. -Taizhou SIA Trading Co., Ltd. (Export Dept.)
-International Sales -Tel: +86 0576 88551619 -Skype: vito-ho -QQ: 289026969
-WhatsApp/WeChat: +86 13656892883 -Email: vito@tzquanshun.com
-Official Web: http://www.cnqsmotor.com/en/
-Facebook: https://www.facebook.com/QSMotor.VitoHo

User avatar
QSMOTOR   100 W

100 W
Posts: 269
Joined: Sep 17 2013 3:14am
Location: QS Motor,Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Contact:

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by QSMOTOR » Jun 04 2018 2:00am

5min and 30min electric drive train testing
1.jpg
1.jpg (70.46 KiB) Viewed 739 times
Test Date: 2017.12.11 by Vito Ho, Liang yupeng,Ruan qunchao,Judy Gong, Zhang ying Ambient temp: 12.1C, Humidity: 61%, Pressure: 102.6kPa

Pictures for refernce Motor
Insert thermocouple inside of motor
2.jpg
2.jpg (124.77 KiB) Viewed 739 times
3.jpg
3.jpg (97.31 KiB) Viewed 739 times
Monitor side cover temp and take note
4.jpg
4.jpg (86.22 KiB) Viewed 739 times
5.jpg
5.jpg (129.36 KiB) Viewed 739 times
Performance curve
1211 1kw205 35HV1 phase59 battery48 in 5min
6.jpg
6.jpg (37.47 KiB) Viewed 739 times
1211 1kw205 35HV1 1.2kw continous 30min test 3rd
31N.m,362.3RPM,1178W last in 30min.
7.jpg
7.jpg (53.96 KiB) Viewed 739 times
Test record
8.jpg
8.jpg (180.05 KiB) Viewed 739 times
9.jpg
9.jpg (229.76 KiB) Viewed 739 times
Test Date: 2017.12.13 by Vito Ho,Liang xianjiang, Zhangying
Ambient temp: 12.3C, Humidity: approx 35%, Pressure: approx 102.6kPa
1st step, to find most suitable setting of controller, with the condition battery current less
than 50A.
We did some test.
1st test Phase current 59%, battery current 37%
maximum battery 48.47A, maximum torque 95.6N.m,
10.jpg
10.jpg (40 KiB) Viewed 739 times
2nd test Phase current 59%, battery current 38%
maximum battery 49.45A, maximum torque 100.4N.m,
11.jpg
11.jpg (39.78 KiB) Viewed 739 times
3rd test Phase current 100%, battery current 23%
maximum battery 51.9A, maximum torque 99.4N.m,
In this test, we make full phase current, but it don't help on the torque.
We measure it by tong-type ammeter, and get 80A maximum, which is RMS current.
So the peak might be 80*1.414=113A, then we set 52% in next test.
Which means the motor couldnot bear more phase current (less than 59%).
12.jpg
12.jpg (39.98 KiB) Viewed 739 times
4th test Phase current 52%, battery current 43%
maximum battery 50.72A, maximum torque 97.8N.m,
13.jpg
13.jpg (39.44 KiB) Viewed 739 times
2nd step, make net power test,
setting Phase current 59%, battery current 38%, refer to attached "12 13 59 38 1st 完整测
试 记录温升".
but I found the battery current is 51.44 (over 50A), It seems the battery current ranges a bit.
14.jpg
14.jpg (63.42 KiB) Viewed 739 times
15.jpg
15.jpg (32.34 KiB) Viewed 739 times
Then I modify the setting, and our workmate turn the throttle a bit during the modification.
And we found the controller break down (with the red led turn on).
After checking with Fany, the controller is dead.
16.jpg
16.jpg (71.11 KiB) Viewed 739 times
We have some KLS4812S controllers in store. And could do more test later.

Test Date: 2017.12.16 by Vito, Liang xianjiang,Huangjie
Ambient temp: 9.8C, Humidity: 64%, Pressure: 102.9kPa
Last time, the Kelly controller KLS4812S was broken after throttle on while adjust setting.
We take 2pcs new KLS4812S controller.
1 st test
1 st controller, 59 battery current, 37 phase current
The motor run when it’s cold, the max battery current is only 41.24A.
We have some KLS4812S controllers in store. And could do more test later.

1 st test
1 st controller, 59 battery current, 37 phase current
The motor run when it’s cold, the max battery current is only 41.24A.
17.jpg
17.jpg (39.69 KiB) Viewed 739 times
Then we set 59 battery current, 45 phase current
The max battery current is 50.04A.
18.jpg
18.jpg (39.01 KiB) Viewed 739 times
As former controller setting is supposed to be 59%-37%.
We tried the 2 nd controller.
2 nd controller, 59 battery current, 45 phase current
The max battery current is 51.34A
19.jpg
19.jpg (39.21 KiB) Viewed 739 times
2 nd controller, 59 battery current, 43 phase current
The max battery current is 51.54A
20.jpg
20.jpg (40.7 KiB) Viewed 739 times
2 nd controller, 59 battery current, 42 phase current
The max battery current is 51.89A
21.jpg
21.jpg (39.75 KiB) Viewed 739 times
The max battery current is strange with the setting compare to former one and the 2pcs
controller with different settings.
After checking with Fany, he advise the % setting depends on internal resistance of mosfet. In
different environment temp, humidity, atmospheric pressure, the temp of controller, the setting
differs slightly.
The hardware and software of controller of different batch are the same.
So we go ahead for the 5min test with 59%-42%.
Before that, we warm up motor with 80% max RPM for 3min, the motor temp goes up to almost
120C.
22.jpg
22.jpg (39.91 KiB) Viewed 739 times
Net power test in 5min.
23.jpg
23.jpg (39.47 KiB) Viewed 739 times
Temp Rise Test
After that, we start temp rise test, not according to the rule of ECE R85.
As in ECE R85, the RPM should be above 90% peak power. In that condition, motor could not run
for 30min (the temp will go over 120C), so we have to limit the top speed to be 93% in controller
setting.
You mentioned need real continuous power of motor.

1 st temp rise test
In 43.2N.m, the motor go from 40.9C to 117.2C in 9min.
24.jpg
24.jpg (41.21 KiB) Viewed 739 times
2 nd temp rise test
In 35.4N.m, the motor go from 46.2C to 125.7C in 30min.
25.jpg
25.jpg (39.41 KiB) Viewed 739 times
During the test, we will try to find the balance power, I continue the test by decrease the torque,
The temp get down a little bit when it’s 30.7N.m to approx 117C.
26.jpg
26.jpg (50.57 KiB) Viewed 739 times
3 rd temp rise test
In 30.7N.m, the motor go from 50.5C to 109.5C in 30min, and to 110.8C in 33min.
27.jpg
27.jpg (41.04 KiB) Viewed 739 times
Peak Power and max torque Test
Due to my record, the peak torque of 205 35H V1 motor is 124.9N.m
100 phase current, 75 battery current,
The max battery current is 124.6A, peak power 2527W, peak torque 119.2N.m
The motor temp go up to 150C.
28.jpg
28.jpg (39.79 KiB) Viewed 739 times
100 phase current,35 battery current,
The max battery current is 66.61A, peak power 2218W, peak torque 105.9N.m
29.jpg
29.jpg (39.83 KiB) Viewed 739 times
Btw., during the test, we found the monitor page in the controller, there are phase current and
motor temp.
When the temp rise sharply, the motor temp is lagging.
When it goes up slowly, the motor temp is almost the same.
30.jpg
30.jpg (52.84 KiB) Viewed 739 times
For phase current, it’s peak phase current, compare the measurement by tong-type ammeter, it’s
RMS phase current.
30.jpg
30.jpg (52.84 KiB) Viewed 739 times
Conclusion
Setting
1.Suggest setting
59% phase current, 42% battery current
2.Temp Rise
30.7N.m, 1244W max continuous power at approx 110C
43.2N.m, 1634W for 9min
35.4N.m, 1416W max in 30min.
3.Peak Power of motor (full setting)
2527W
Peak Power of electric drive train
Vito Ho -Powered by SIA
No QS Motor, No Super EVs!

-QS Motor/Taizhou Quanshun Motor Co., Ltd. -Taizhou SIA Trading Co., Ltd. (Export Dept.)
-International Sales -Tel: +86 0576 88551619 -Skype: vito-ho -QQ: 289026969
-WhatsApp/WeChat: +86 13656892883 -Email: vito@tzquanshun.com
-Official Web: http://www.cnqsmotor.com/en/
-Facebook: https://www.facebook.com/QSMotor.VitoHo

User avatar
QSMOTOR   100 W

100 W
Posts: 269
Joined: Sep 17 2013 3:14am
Location: QS Motor,Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Contact:

Re: QS MOTOR 1000w 205 35H V1 135mm dropout spoke hub motor with 26" wheel rim

Post by QSMOTOR » Jun 04 2018 2:52am

Pls reference next link.
Attachments
主图1.jpg
主图1.jpg (36.05 KiB) Viewed 732 times
主图2.jpg
主图2.jpg (42.56 KiB) Viewed 732 times
Kits.jpg
Kits.jpg (61.52 KiB) Viewed 732 times
Weight.jpg
Weight.jpg (86.1 KiB) Viewed 732 times
Drawing.jpg
Drawing.jpg (72.54 KiB) Viewed 732 times
26-wheel-rim.jpg
26-wheel-rim.jpg (52.97 KiB) Viewed 732 times
Testing report.jpg
Testing report.jpg (59.09 KiB) Viewed 732 times
Last edited by QSMOTOR on Jun 04 2018 3:06am, edited 1 time in total.
Vito Ho -Powered by SIA
No QS Motor, No Super EVs!

-QS Motor/Taizhou Quanshun Motor Co., Ltd. -Taizhou SIA Trading Co., Ltd. (Export Dept.)
-International Sales -Tel: +86 0576 88551619 -Skype: vito-ho -QQ: 289026969
-WhatsApp/WeChat: +86 13656892883 -Email: vito@tzquanshun.com
-Official Web: http://www.cnqsmotor.com/en/
-Facebook: https://www.facebook.com/QSMotor.VitoHo

User avatar
QSMOTOR   100 W

100 W
Posts: 269
Joined: Sep 17 2013 3:14am
Location: QS Motor,Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Contact:

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by QSMOTOR » Jun 04 2018 3:02am

QS MOTOR 1000w 205 35H V1 135mm dropout spoke hub motor with 26" wheel rim
135mm dropouts for 7 speed freewheel rear wheel
主图1.jpg
主图1.jpg (36.05 KiB) Viewed 730 times
主图2.jpg
主图2.jpg (42.56 KiB) Viewed 730 times
Kits.jpg
Kits.jpg (61.52 KiB) Viewed 730 times
Drawing.jpg
Drawing.jpg (72.54 KiB) Viewed 730 times
Weight.jpg
Weight.jpg (86.1 KiB) Viewed 730 times
26-wheel-rim.jpg
26-wheel-rim.jpg (52.97 KiB) Viewed 730 times
For this one, you can buy from our Amazon webiste: https://www.amazon.com/dp/B07DC1MH2B
You also can free to connect us.

Specification:
Motor Type: BLDC Permanent Magnet Outer Rotor In-Wheel Hub Motor With Hall Sensor
Brand: QS Motor,QSMOTOR
Motor Design: Double axle without rim (not integrated), 36 spoke holes, OD 3.4mm
Matching Rim size: 24inch, 26inch E-Bike Wheel, 17inch, 18inch, 19inch moped wheel.
Magnet Height: 35mm, 23 pole pairs
Stator: Steel Core
Rated Power: 1000W (2000W peak in few seconds)
Rated Voltage: 48V as default (48V-96V, optional)
Speed: 45KPH as default (24-120KPH, optional)
kV: 7.3/8.5(as default)/9.2/10.4/11.9/12.9/18.8
Max Torque: approx 100N.m
Max Efficiency: above 87.3%
Continuous Battery Current: 20.8A (60V)
Peak Battery Current: 41.5A (60V)
Suggest Peak Phase Current: 89-112A (depend on the kV)
Thermic Probe: KTY83/122 (as default, optional)
Working Temperature: 70-120℃ , peak 150 ℃
Brake type: Disc Brake, PCD6*44mm for bicycle
Drop-outs/Rear Fork Width for installation: 135mm
37.5mm english thread length for 7 speed freewheel
10mm axle flats
One Hall Set with waterproof connectors
3mm² Cross Section of Phase Wire (not include insulation layer)
Hall Sensor Phasing angle: 120 degree
Waterproof Grade: IP54
Color: Black (as default)
N.W./G.W.: 8.04kg/9.45kg
Package Dimension: 34cm*34cm*33cm/piece

Testing report:
Winding 11*6T, 404RPM at 48V, 505RPM at 60V, equal to 8.42kV
Testing report.jpg
Testing report.jpg (59.09 KiB) Viewed 730 times
Vito Ho -Powered by SIA
No QS Motor, No Super EVs!

-QS Motor/Taizhou Quanshun Motor Co., Ltd. -Taizhou SIA Trading Co., Ltd. (Export Dept.)
-International Sales -Tel: +86 0576 88551619 -Skype: vito-ho -QQ: 289026969
-WhatsApp/WeChat: +86 13656892883 -Email: vito@tzquanshun.com
-Official Web: http://www.cnqsmotor.com/en/
-Facebook: https://www.facebook.com/QSMotor.VitoHo

User avatar
QSMOTOR   100 W

100 W
Posts: 269
Joined: Sep 17 2013 3:14am
Location: QS Motor,Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Contact:

Re: |Waterproof Improvement| QSMOTOR hub motors

Post by QSMOTOR » Jun 07 2018 4:02am

Some customer complain about hub motor rust issue, especially for high power hub motor with standard wire (refer to below picture). E.g. 3000W 205 50H V3 hub motor, include spoke hub motors, 8000W 273 50H V3 hub motors.
1.jpg
2.jpg
2.jpg (275.75 KiB) Viewed 671 times
Even there is rust problem Individually (not mass production), QS pay high attention on it. Doing some analysis and test and apply some improvement accordingly.
As advised by our QC manager, water/moisture could only get inside of motor from 3 position.
1. Between side cover and iron ring
2. Oil seal
3. Axle holes
Regarding 1st point, QS change better side cover glue and implement glue automatically (instead by hand) since Sep, 2017. We're going to add locking glue tank on side cover in near future.
3.jpg
3.jpg (124.9 KiB) Viewed 671 times
Regarding 2nd point, we believe the oil seal is ok.
Regarding 3rd point, QS make dual holes for axle glue instead of single hole since end of 2017, which make axle glue fill up with phase wires. Meanwhile, add heat shrink tubing to lengthen PVC silicone fiberglass sleeving for better waterproof.
Btw., some customer use insulation varnish on stator and magnet for better waterproof. It could postpone motor from rusting, which proved by many users. If you suffer from rust issue, QS could also try to make the modification for samples (insulation varnish on stator and magnet). refer to below picture.
4.jpg
4.jpg (163.96 KiB) Viewed 671 times
For details, please feel free to contact with us if any question.

No QS Motor, No Super EVs!
Vito Ho -Powered by SIA
No QS Motor, No Super EVs!

-QS Motor/Taizhou Quanshun Motor Co., Ltd. -Taizhou SIA Trading Co., Ltd. (Export Dept.)
-International Sales -Tel: +86 0576 88551619 -Skype: vito-ho -QQ: 289026969
-WhatsApp/WeChat: +86 13656892883 -Email: vito@tzquanshun.com
-Official Web: http://www.cnqsmotor.com/en/
-Facebook: https://www.facebook.com/QSMotor.VitoHo

cwah   10 GW

10 GW
Posts: 4130
Joined: Jul 24 2011 5:42am
Location: Between paris and london

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by cwah » Jun 08 2018 5:00pm

Hello

I'm looking for a super reliable, silent and waterproof kit:
- my battery is 60v 3000W continuous power
- My bike is high load (150-200kg).
- I need speed between 25-60km/h
- I need a motor on 20" wheel (casted wheel) and 135mm dropout.
- controller has to be sine wave and absolutely silent and reliable

Do you have something?

Thanks
Help me find my stolen electric brompton: http://bit.ly/1a0vbBC and Bosch Sinus B3 http://bit.ly/1eV0WQz

User avatar
QSMOTOR   100 W

100 W
Posts: 269
Joined: Sep 17 2013 3:14am
Location: QS Motor,Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Contact:

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by QSMOTOR » Jun 08 2018 9:32pm

Thank you for your message, this is Judy from QS motor.

1. As your requirement, you can use our 20inch 60V 1000w 205 35H V1 Cast Wheel Hub Motor, dropout 135mm. RPM about 585RPM at 60v, max speed is about 45km/h. Pls see below picture:
1.jpg
1.jpg (26.13 KiB) Viewed 612 times
2.jpg
2.jpg (13.63 KiB) Viewed 612 times
3.jpg
3.jpg (39.33 KiB) Viewed 612 times
Here attach the drawing for this motor, pls check.

The unit price for this motor is $110/pc
2. The single freewheel is $6/pc
3. For controller, you can use sine wave Kelly controller KLS4812S with bluetooth, waterproof IP54, pls see this picture:
4.jpg
4.jpg (34.77 KiB) Viewed 612 times
http://www.cnqsmotor.com/en/article_rea ... A/719.html
The unit price for this KLS4812S controller is $112/pc(including bluetooth)

We also could provide disc brake, throttle, do you need?
4. Half Twist Throttle With Voltage Display And Ignition
5.jpg
5.jpg (22.33 KiB) Viewed 612 times
Unit price: $9.8/pc
5. Electric bicycle hydraulic disc brake system
6.jpg
6.jpg (35.65 KiB) Viewed 612 times
Unit price: $95/set

And could you pls provide your e-mail address that would be convenient for us to communicate?

Best regards.
----------------------------------------
Judy -Powered by SIA
No QS Motor, No Super EVs!
-Taizhou Quanshun Motor Co., Ltd. -Taizhou SIA Trading Co., Ltd. (QS Export Department)
-International Sales -Tel: +86 0576 88551619 -QQ: 710436216 -Skype:judy.gong5
-WhatsApp: +86 13575887162 -Email: judy@tzquanshun.com
-Facebbok: https://www.facebook.com/tzqsmotor/ -Twitter: https://twitter.com/cyanzhang1
-Web: http://www.cnqsmotor.com/en/(under construction) http://qsmotor.en.alibaba.com/
Amazon: https://www.amazon.com/s/ref=w_bl_hsx_s ... ds=QSMOTOR

cwah wrote:
Jun 08 2018 5:00pm
Hello

I'm looking for a super reliable, silent and waterproof kit:
- my battery is 60v 3000W continuous power
- My bike is high load (150-200kg).
- I need speed between 25-60km/h
- I need a motor on 20" wheel (casted wheel) and 135mm dropout.
- controller has to be sine wave and absolutely silent and reliable

Do you have something?

Thanks
Attachments
205自行车135开档带碟刹带英制飞轮2017.1.16.pdf
(131.66 KiB) Downloaded 24 times
Vito Ho -Powered by SIA
No QS Motor, No Super EVs!

-QS Motor/Taizhou Quanshun Motor Co., Ltd. -Taizhou SIA Trading Co., Ltd. (Export Dept.)
-International Sales -Tel: +86 0576 88551619 -Skype: vito-ho -QQ: 289026969
-WhatsApp/WeChat: +86 13656892883 -Email: vito@tzquanshun.com
-Official Web: http://www.cnqsmotor.com/en/
-Facebook: https://www.facebook.com/QSMotor.VitoHo

Post Reply