QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Place for dealers to post items for sale.
JumperJackFlash   100 W

100 W
Posts: 147
Joined: Dec 05 2015 4:55pm
Location: Los Angeles, CA USA

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by JumperJackFlash » Jul 19 2016 12:58am

Gensem,

That looks sweet!!!!!!!!!!!!!!!

Could you post a pic of the rim and motor? I would like to see how you laced her up. What kind of rim / spokes did you use?

Thanks.

User avatar
minde28383   10 kW

10 kW
Posts: 527
Joined: Apr 02 2010 7:11am

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by minde28383 » Jul 19 2016 3:07am

Hi Gensem.
We need video. This motor looks insane in 17rim:)
ebike build in progress
CN 5.5kw scooter (on sale)
E Mindless Maverick Talisman longboard, 2.2KW motor, 150Amps controller (on sale)

User avatar
gensem   100 kW

100 kW
Posts: 1461
Joined: Apr 01 2011 5:28pm
Location: Sao Paulo - Brazil

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by gensem » Jul 19 2016 10:40am

JumperJackFlash wrote:Gensem,

That looks sweet!!!!!!!!!!!!!!!

Could you post a pic of the rim and motor? I would like to see how you laced her up. What kind of rim / spokes did you use?

Thanks.
I ll do soon... wheel is not true, need to mess with it later. Spokes are stainless steel 80.5mm, rim is a 17" 1.85
Brakes are no good for over 60km/h atm... Placed and order for 3 203mm hope floating rotors.
Justin we really appreciate what you did!

User avatar
gensem   100 kW

100 kW
Posts: 1461
Joined: Apr 01 2011 5:28pm
Location: Sao Paulo - Brazil

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by gensem » Jul 19 2016 10:44am

minde28383 wrote:Hi Gensem.
We need video. This motor looks insane in 17rim:)
Video ll take awhile... Im still having a hard time with Adaptto. I do get over 150kmh no load in the bench, but when I try to ride it gets the controller in protected mode like a maniac. Will reset the controller again and fiddle with phase wires and all the settings to see if i can make it run properly.
Justin we really appreciate what you did!

Mammalian04   100 kW

100 kW
Posts: 1103
Joined: Apr 26 2014 3:26am
Location: Austin, Texas

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by Mammalian04 » Jul 19 2016 11:44pm

gensem wrote:Bad quality photo of the bike getting together.
Vector.jpg
I just looked at that photo again. That is some crazy 3 cross in a tiny space!

What kind of rim is that? Did you have to drill the angles in the rim?

User avatar
gensem   100 kW

100 kW
Posts: 1461
Joined: Apr 01 2011 5:28pm
Location: Sao Paulo - Brazil

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by gensem » Jul 20 2016 7:28am

Mammalian04 wrote:
gensem wrote:Bad quality photo of the bike getting together.
Vector.jpg
I just looked at that photo again. That is some crazy 3 cross in a tiny space!

What kind of rim is that? Did you have to drill the angles in the rim?

Its single cross... I ll take a better picture today. Yep had to drill the holes to get a proper angle.
Justin we really appreciate what you did!

User avatar
mistercrash   10 kW

10 kW
Posts: 958
Joined: Mar 09 2011 11:01am
Location: Guelph, Ontario, Canada eh!

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by mistercrash » Jul 30 2016 6:41pm

Hello Vito or Cherry or Damon. Can you please answer my emails about the APT96600 controller I bought and can't program with the EV DriveManager V2.0.0.7B software I was given because of a '''Time Error '380''' on two different computers using two different OSs.

Thanks
Ray
Send $10 at paypal.me/Ray1964 and you will be in my thoughts and prayers.

User avatar
gensem   100 kW

100 kW
Posts: 1461
Joined: Apr 01 2011 5:28pm
Location: Sao Paulo - Brazil

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by gensem » Aug 03 2016 8:45am

gensem wrote:Bad quality photo of the bike getting together.
Vector.jpg
Small update... 4 Spoke nipples with washers went thru the rim when I doing one my first riding tests (50-60kmh) due to extreme lacing angle. I ll try to lace a 18" rim next week to see if the angle gets any better (was using a 17" rim).
Justin we really appreciate what you did!

User avatar
BCTECH   100 W

100 W
Posts: 290
Joined: Oct 24 2014 2:04pm

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by BCTECH » Aug 03 2016 9:51am

gensem wrote:
gensem wrote:Bad quality photo of the bike getting together.
Vector.jpg
Small update... 4 Spoke nipples with washers went thru the rim when I doing one my first riding tests (50-60kmh) due to extreme lacing angle. I ll try to lace a 18" rim next week to see if the angle gets any better (was using a 17" rim).
what spoke size did you use?

User avatar
gensem   100 kW

100 kW
Posts: 1461
Joined: Apr 01 2011 5:28pm
Location: Sao Paulo - Brazil

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by gensem » Aug 03 2016 12:09pm

80mm but shorter would be better for a 17" rim.
Shoulda fit a 18" rim nicely.
Justin we really appreciate what you did!

User avatar
BCTECH   100 W

100 W
Posts: 290
Joined: Oct 24 2014 2:04pm

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by BCTECH » Aug 03 2016 12:20pm

gensem wrote:80mm but shorter would be better for a 17" rim.
Shoulda fit a 18" rim nicely.
sorry, I mean the gauge size. are you using 8 gauge?

User avatar
gensem   100 kW

100 kW
Posts: 1461
Joined: Apr 01 2011 5:28pm
Location: Sao Paulo - Brazil

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by gensem » Aug 03 2016 12:43pm

BCTECH wrote:
gensem wrote:80mm but shorter would be better for a 17" rim.
Shoulda fit a 18" rim nicely.
sorry, I mean the gauge size. are you using 8 gauge?
Yep, 8g.
Justin we really appreciate what you did!

User avatar
mistercrash   10 kW

10 kW
Posts: 958
Joined: Mar 09 2011 11:01am
Location: Guelph, Ontario, Canada eh!

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by mistercrash » Aug 04 2016 5:42pm

mistercrash wrote:Hello Vito or Cherry or Damon. Can you please answer my emails about the APT96600 controller I bought and can't program with the EV DriveManager V2.0.0.7B software I was given because of a '''Time Error '380''' on two different computers using two different OSs.

Thanks
Ray
Problem solved, thanks Vito and Damon. Awesome customer service.
Send $10 at paypal.me/Ray1964 and you will be in my thoughts and prayers.

atarijedi   100 W

100 W
Posts: 239
Joined: Jul 18 2016 7:16am

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by atarijedi » Aug 08 2016 9:07pm

mistercrash wrote:
mistercrash wrote:Hello Vito or Cherry or Damon. Can you please answer my emails about the APT96600 controller I bought and can't program with the EV DriveManager V2.0.0.7B software I was given because of a '''Time Error '380''' on two different computers using two different OSs.

Thanks
Ray
Problem solved, thanks Vito and Damon. Awesome customer service.
Sorry, this is a bit of a pet peeve of mine. Could you post what the solution was, so that others who might search for the same error can get a possible immediate answer?

User avatar
Marin   1 kW

1 kW
Posts: 363
Joined: May 20 2015 4:51pm
Location: BC, Canada

QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufacture

Post by Marin » Aug 09 2016 3:08pm

Hi there
I have purchased a QS 30H motor laced in a 26" bicycle wheel from a reseller in Canada. I have the motor hooked up and running well but there is an extra wire still not connected. Coming from the motor are 3 phase wires, a +, -, and 3 hall wires along with an extra white wire. This extra wire is a temp sensor I am told but have no specs on it.

How is this white wire hooked up to my cycle analyst temp sensor?

Image
Marin ex-rental hybrid with 48v bionx...sold
Specialized hardrock with magic pie 4-5
Lunacycle with l/r mid drive coming soon
Kona Caldera with QS 30H (maybe), and phase runner
Giant Yukon bbs02
Kona Abra Cadabra bbshd
Wildfire fat bike bbshd

User avatar
mistercrash   10 kW

10 kW
Posts: 958
Joined: Mar 09 2011 11:01am
Location: Guelph, Ontario, Canada eh!

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by mistercrash » Aug 11 2016 7:23pm

atarijedi wrote:
mistercrash wrote:
mistercrash wrote:Hello Vito or Cherry or Damon. Can you please answer my emails about the APT96600 controller I bought and can't program with the EV DriveManager V2.0.0.7B software I was given because of a '''Time Error '380''' on two different computers using two different OSs.

Thanks
Ray
Problem solved, thanks Vito and Damon. Awesome customer service.
Sorry, this is a bit of a pet peeve of mine. Could you post what the solution was, so that others who might search for the same error can get a possible immediate answer?
I'm sorry I ticked you off, but the solution is not very clear to me so that would be why I did not post the solution. I tried for a while to use an old 'workshop'' laptop using Windows XP 32 bit and I had error messages on the installation of the USB cable driver. I installed the OCX files, the software and USB cable driver on a new laptop using Windows 10 successfully. I also installed everything on a one year old desktop using Windows 8.1 successfully.

So the only solution I could have brought in my earlier post was to get a new computer? I don't think that is an acceptable solution and that would be why I did not post it. During the many web searches I did to find a solution to the problems with the old laptop, I read that not having Microsoft Office installed would cause problems. The other two computers have Office on them. Is that the solution? I just don't know.
Send $10 at paypal.me/Ray1964 and you will be in my thoughts and prayers.

User avatar
QSMOTOR   1 kW

1 kW
Posts: 336
Joined: Sep 17 2013 3:14am
Location: QS Motor,Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Contact:

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by QSMOTOR » Aug 12 2016 4:13am

mistercrash wrote:
I'm sorry I ticked you off, but the solution is not very clear to me so that would be why I did not post the solution. I tried for a while to use an old 'workshop'' laptop using Windows XP 32 bit and I had error messages on the installation of the USB cable driver. I installed the OCX files, the software and USB cable driver on a new laptop using Windows 10 successfully. I also installed everything on a one year old desktop using Windows 8.1 successfully.

So the only solution I could have brought in my earlier post was to get a new computer? I don't think that is an acceptable solution and that would be why I did not post it. During the many web searches I did to find a solution to the problems with the old laptop, I read that not having Microsoft Office installed would cause problems. The other two computers have Office on them. Is that the solution? I just don't know.
Hello Ray,

For USB driver, it's not matter on controller. Anyway, it was finally sovled.
Thank you for your understanding.

Best Regards
Judy -Powered by SIA
No QS Motor, No Super EVs!

-QS Motor/Taizhou Quanshun Motor Co., Ltd. -Taizhou SIA Trading Co., Ltd. (Export Dept.)
-International Sales -Tel: +86 0576 88551619 -Skype: vito-ho -QQ: 289026969
-WhatsApp/WeChat: +86 13575887162 -Email: judy@tzquanshun.com
-Official Web: http://www.cnqsmotor.com/en/
-Facebook: https://www.facebook.com/judy.gong.775

-Amazon: https://www.amazon.com/s?k=SPOKE+HUB+MO ... nb_sb_noss

User avatar
QSMOTOR   1 kW

1 kW
Posts: 336
Joined: Sep 17 2013 3:14am
Location: QS Motor,Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Contact:

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by QSMOTOR » Aug 12 2016 4:15am

Marin wrote:Hi there
I have purchased a QS 30H motor laced in a 26" bicycle wheel from a reseller in Canada. I have the motor hooked up and running well but there is an extra wire still not connected. Coming from the motor are 3 phase wires, a +, -, and 3 hall wires along with an extra white wire. This extra wire is a temp sensor I am told but have no specs on it.

How is this white wire hooked up to my cycle analyst temp sensor?

Image
Hello Marin,

Could you please advise the name of the reseller in Canada. The QS 30H Motor is not avaialbe for the moment.
We have to check the spec of motor accordingly.

Best Regards
Judy -Powered by SIA
No QS Motor, No Super EVs!

-QS Motor/Taizhou Quanshun Motor Co., Ltd. -Taizhou SIA Trading Co., Ltd. (Export Dept.)
-International Sales -Tel: +86 0576 88551619 -Skype: vito-ho -QQ: 289026969
-WhatsApp/WeChat: +86 13575887162 -Email: judy@tzquanshun.com
-Official Web: http://www.cnqsmotor.com/en/
-Facebook: https://www.facebook.com/judy.gong.775

-Amazon: https://www.amazon.com/s?k=SPOKE+HUB+MO ... nb_sb_noss

User avatar
QSMOTOR   1 kW

1 kW
Posts: 336
Joined: Sep 17 2013 3:14am
Location: QS Motor,Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Contact:

Re: New 12 & 48 MOSFET Sabvoton Motor Controller on process

Post by QSMOTOR » Aug 12 2016 4:19am

Sabvoton Motor Controller is well known for its higher cost performance.
Here is lastest news.
1. 12 Mosfet small controller is under developing, 48V-72V, suit for 800W motors.
Estimated to be in mass production in middle Sep., 2016.
After one month testing in China, it will be available for exporting.
2. 48 Mosfet big controller is under developing, 48V-96V, 200-250A peak battery current,
500-550A peak phase current.
The sample estimated to be ready at the end of Aug., 2016, it will be tested in China before exporting.
3. APP for android is under modifying, will be test next week.
After 40 days, the APP for IOS will be on process.

For more news, http://www.cnqsmotor.com/en/article_list_99.html
Sabvoton Controller
https://endless-sphere.com/forums/viewt ... 8#p1130438

Best Regards
Judy -Powered by SIA
No QS Motor, No Super EVs!

-QS Motor/Taizhou Quanshun Motor Co., Ltd. -Taizhou SIA Trading Co., Ltd. (Export Dept.)
-International Sales -Tel: +86 0576 88551619 -Skype: vito-ho -QQ: 289026969
-WhatsApp/WeChat: +86 13575887162 -Email: judy@tzquanshun.com
-Official Web: http://www.cnqsmotor.com/en/
-Facebook: https://www.facebook.com/judy.gong.775

-Amazon: https://www.amazon.com/s?k=SPOKE+HUB+MO ... nb_sb_noss

User avatar
macribs   1.21 GW

1.21 GW
Posts: 3612
Joined: Jul 22 2014 5:59pm

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by macribs » Aug 12 2016 4:39am

2. 48 Mosfet big controller is under developing, 48V-96V, 200-250A peak battery current,
500-550A peak phase current.

Now I know what to get myself for christmas 8)
Any more details? Size of controller, manufacturer name, etc.

Now 48 fets that should be able to push a lot of power to the motor.

User avatar
QSMOTOR   1 kW

1 kW
Posts: 336
Joined: Sep 17 2013 3:14am
Location: QS Motor,Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Contact:

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by QSMOTOR » Aug 12 2016 9:40am

macribs wrote:
2. 48 Mosfet big controller is under developing, 48V-96V, 200-250A peak battery current,
500-550A peak phase current.

Now I know what to get myself for christmas 8)
Any more details? Size of controller, manufacturer name, etc.

Now 48 fets that should be able to push a lot of power to the motor.
Hello Macribs,

How are you!
All the spec are pending now, I will keep news post once avaiable.

Best Regards
Judy -Powered by SIA
No QS Motor, No Super EVs!

-QS Motor/Taizhou Quanshun Motor Co., Ltd. -Taizhou SIA Trading Co., Ltd. (Export Dept.)
-International Sales -Tel: +86 0576 88551619 -Skype: vito-ho -QQ: 289026969
-WhatsApp/WeChat: +86 13575887162 -Email: judy@tzquanshun.com
-Official Web: http://www.cnqsmotor.com/en/
-Facebook: https://www.facebook.com/judy.gong.775

-Amazon: https://www.amazon.com/s?k=SPOKE+HUB+MO ... nb_sb_noss

User avatar
Marin   1 kW

1 kW
Posts: 363
Joined: May 20 2015 4:51pm
Location: BC, Canada

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by Marin » Aug 15 2016 1:00pm

QSMOTOR wrote:
Marin wrote:Hi there
I have purchased a QS 30H motor laced in a 26" bicycle wheel from a reseller in Canada. I have the motor hooked up and running well but there is an extra wire still not connected. Coming from the motor are 3 phase wires, a +, -, and 3 hall wires along with an extra white wire. This extra wire is a temp sensor I am told but have no specs on it.

How is this white wire hooked up to my cycle analyst temp sensor?

Image
Hello Marin,

Could you please advise the name of the reseller in Canada. The QS 30H Motor is not avaialbe for the moment.
We have to check the spec of motor accordingly.

Best Regards

I sent him an email and asked that he reply here, thanks for your help.
Marin ex-rental hybrid with 48v bionx...sold
Specialized hardrock with magic pie 4-5
Lunacycle with l/r mid drive coming soon
Kona Caldera with QS 30H (maybe), and phase runner
Giant Yukon bbs02
Kona Abra Cadabra bbshd
Wildfire fat bike bbshd

GmagNeato   100 W

100 W
Posts: 191
Joined: Oct 12 2015 7:40am
Location: Charlotte, NC

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by GmagNeato » Aug 15 2016 5:25pm

Hello Vito,

PM sent regarding 273 motor.

Thanks.
G
1st build: (commuter conversion) Novara HT / DIY 15s7p Panasonic NCRB's (harvested from used laptop packs) / 40a generic Chinese controller / 1500w 5T Leaf motor (STOCK)

2nd build: EEB frame / 20s4p of 7200mah Turnigy Hard Case Packs, 74v nominal, 28.8ah, 2131wh / Adaptto Max-E (9G4 firmware currently) + BMS + 70a Charge Coil onboard / QS 205 V3 Extra 5T

OCD   100 W

100 W
Posts: 143
Joined: Jan 09 2011 12:25pm
Location: Nanaimo BC Canada

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by OCD » Aug 15 2016 11:45pm

I sent him an email and asked that he reply here, thanks for your help.
Marin purchased this motor from me which was part of a sample batch I received from one of QS Motor's wholesalers, not from them directly. I wasn't able to get a reply about the mysterious 6th wire from them, but the QS site lists a temp sender on the 1500 watt motor which is what these motors were sold to me as. Beyond that I couldn't guarantee Marin how to hook it up to his CA as I've never done it before and suggested contacting Grin or posting the question here. Along the way I think someone chimed in suggesting it could be a speed sensor wire but I thought the CA would just read that info from the controller's direct plug in.

If it's a thermistor, wouldn't there be a measurable connection between the white wire and ground which would reduce as the temperature increased or how could it be tested without opening the cover to see what's at the end of the white wire? It's clear that you get better service from some overseas vendors when you purchase in amounts great than 100 units. This was the last motor from a sample shipment and the next ten I received had no 6th wire or I'd pull the side cover off to look for myself. Sorry I can't be of any more help than that.

I understand the motor works fine otherwise.

Thanks

Alan

jackal   1 mW

1 mW
Posts: 14
Joined: Aug 10 2016 9:34pm
Location: Redwood City, CA

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by jackal » Aug 16 2016 10:27am

Hi Vito,

Sent a PM about wide rims options for the 273

Thanks!

Post Reply