Nucular electronics - complete kit for ev! [beta]

Place for dealers to post items for sale.
User avatar
serious_sam   1 kW

1 kW
Posts: 342
Joined: Mar 05 2017 8:07am
Location: Australia

Re: Nucular electronics - complete kit for ev! [beta]

Post by serious_sam » Mar 24 2020 5:09am

madin88 wrote:
Mar 24 2020 4:26am
furthermore all the magnets were loose because the FF did react with the glue and dissolved it.
Shit. That's not good. What motor?

Bartosh   100 W

100 W
Posts: 130
Joined: May 10 2017 3:32pm

Re: Nucular electronics - complete kit for ev! [beta]

Post by Bartosh » Mar 24 2020 5:17am

madin88 wrote:
Mar 24 2020 4:26am
How is phase current of Nuc definded, is it peak or RMS?

If it's rated for 500A RMS it would be 700A peak
while a 500A peak rating would be around 350A RMS
Peak, measured.
madin88 wrote:
Mar 24 2020 4:26am
I did put 10ml into same motor and after 2 years and 3000-4000km it was gone, and furthermore all the magnets were loose because the FF did react with the glue and dissolved it.
BTW same story here (QS 205). Glue did not last, whole magnet ring got loose.

john61ct   100 GW

100 GW
Posts: 5420
Joined: Dec 18 2018 2:06pm

Re: Nucular electronics - complete kit for ev! [beta]

Post by john61ct » Mar 24 2020 8:45am

Thread for that specific topic

viewtopic.php?t=105300

User avatar
madin88   1 GW

1 GW
Posts: 3070
Joined: May 27 2013 2:02am
Location: Austria

Re: Nucular electronics - complete kit for ev! [beta]

Post by madin88 » Mar 24 2020 9:44am

serious_sam wrote:
Mar 21 2020 6:04pm
Do you know of any references or further reading for more detail on specifically why FW is more efficient on IPM motors?
viewtopic.php?f=30&t=97880&start=75#p1436291
viewtopic.php?f=6&t=95100#p1392739

User avatar
serious_sam   1 kW

1 kW
Posts: 342
Joined: Mar 05 2017 8:07am
Location: Australia

Re: Nucular electronics - complete kit for ev! [beta]

Post by serious_sam » Mar 25 2020 6:20pm

Good reading. Thanks!

Altair   1 kW

1 kW
Posts: 321
Joined: May 03 2014 10:35am
Location: Quebec, Canada

Re: Nucular electronics - complete kit for ev! [beta]

Post by Altair » Mar 27 2020 9:01am

Bartosh wrote:
Mar 24 2020 5:17am
madin88 wrote:
Mar 24 2020 4:26am
How is phase current of Nuc definded, is it peak or RMS?
If it's rated for 500A RMS it would be 700A peak
while a 500A peak rating would be around 350A RMS
Peak, measured.

And, in the specification sheet from Nucular, are the currents stated as Short term Max or Continuous max ?

User avatar
VasiliSk   1 kW

1 kW
Posts: 338
Joined: Apr 10 2014 5:11am
Location: Russia
Contact:

Re: Nucular electronics - complete kit for ev! [beta]

Post by VasiliSk » Mar 27 2020 9:33am

Depends on cooling. when i put 12F controller under water with compound filling it was able to work on max phase for 5min at 45-50degree on fet measured. Could work more but motor overheated

Hotfix for display added to wiki, display speed sensor didnt work

User avatar
gman1971   10 kW

10 kW
Posts: 976
Joined: Oct 17 2015 10:17pm

Re: Nucular electronics - complete kit for ev! [beta]

Post by gman1971 » Mar 29 2020 3:25pm

Easy enough. Thank you.

At this point I am exploring other possibilities. Thanks.

G.
lukashanak wrote:
Mar 20 2020 3:29am
gman1971 wrote:
Mar 13 2020 11:48am
Hi VasiliSk,

So, do you know what the setup for the motor hall sensors on a Cyclone is? Does anyone who has done this for a C3000W motor have some wiring diagrams as to how to connect the C3000W motor to the Nucular?

Thanks.

G.
Connect randomly and run autodetection.... :D
I am all about high-speed, low-drag, mid-drives and gears...
A-3 trike, ?-kW, ??+ mph (Cyclone powered) Very fast, ludicrous speed fast...
A-1B trike, 6+kW, 65+mph (Cyclone powered): https://www.youtube.com/watch?v=oFC8MRwvgUM
A-2A trike 3kW, 50mph (Cyclone powered): https://www.youtube.com/watch?v=bNoqp0wl6Vo
eB-1C bike 3kW, 42mph (Cyclone powered): https://www.youtube.com/watch?v=_weSmz_h3Ig

User avatar
VasiliSk   1 kW

1 kW
Posts: 338
Joined: Apr 10 2014 5:11am
Location: Russia
Contact:

Re: Nucular electronics - complete kit for ev! [beta]

Post by VasiliSk » Apr 02 2020 12:06pm

Hi guys, some news here.

Our government keep doing weird shit, they dont have balls to announce quarantine or emergency situation. They call it here 'vacation days' or 'self-isolation' but just published some laws that say if people will violate 'self-isolation' will be penalized. There is a lot of questions but not enough answers.

Delivery of 12F will be delayed for another month, probably till end of May, for those who placed orders long time ago.
24F out of stock
New 6F in production, 4 month for placed orders.
If situation will keep going this way we will do some software work at home, for experimental updates you can join telegram group, link in footer.

User avatar
Skaiwerd   100 W

100 W
Posts: 212
Joined: Jun 16 2016 4:55am
Location: CT

Re: Nucular electronics - complete kit for ev! [beta]

Post by Skaiwerd » Apr 02 2020 5:32pm

Thanks for the update! Stay safe!

punchy   1 µW

1 µW
Posts: 2
Joined: Mar 25 2020 11:47pm

Re: Nucular electronics - complete kit for ev! [beta]

Post by punchy » Apr 05 2020 10:24pm

Hello all! Newcomer to this so please excuse any lack of knowledge, but during my ebike frame hunt, I came across Teleport and their controllers.

https://teleportbikes.com/controllers

So now I'm curious as to how these similar looking controllers compare to Nucular's controllers? I just quickly glossed of the specs and didn't really see much difference. Am I just looking at the same thing? Are these clones?

Hope to buy a Nucular controller one day! :D

Turbomatic   1 mW

1 mW
Posts: 19
Joined: Nov 14 2014 3:33am

Re: Nucular electronics - complete kit for ev! [beta]

Post by Turbomatic » Apr 05 2020 10:58pm

punchy wrote:
Apr 05 2020 10:24pm
Hello all! Newcomer to this so please excuse any lack of knowledge, but during my ebike frame hunt, I came across Teleport and their controllers.

https://teleportbikes.com/controllers

So now I'm curious as to how these similar looking controllers compare to Nucular's controllers? I just quickly glossed of the specs and didn't really see much difference. Am I just looking at the same thing? Are these clones?

Hope to buy a Nucular controller one day! :D
Hello! It is Nucular controllers and Teleportbikes one of our dealers.

punchy   1 µW

1 µW
Posts: 2
Joined: Mar 25 2020 11:47pm

Re: Nucular electronics - complete kit for ev! [beta]

Post by punchy » Apr 05 2020 11:10pm

Turbomatic wrote:
Apr 05 2020 10:58pm
punchy wrote:
Apr 05 2020 10:24pm
Hello all! Newcomer to this so please excuse any lack of knowledge, but during my ebike frame hunt, I came across Teleport and their controllers.

https://teleportbikes.com/controllers

So now I'm curious as to how these similar looking controllers compare to Nucular's controllers? I just quickly glossed of the specs and didn't really see much difference. Am I just looking at the same thing? Are these clones?

Hope to buy a Nucular controller one day! :D
Hello! It is Nucular controllers and Teleportbikes one of our dealers.
Ah, I see. Thank you!

john61ct   100 GW

100 GW
Posts: 5420
Joined: Dec 18 2018 2:06pm

Re: Nucular electronics - complete kit for ev! [beta]

Post by john61ct » Apr 06 2020 2:40am

Do dealers jump the queue?

Turbomatic   1 mW

1 mW
Posts: 19
Joined: Nov 14 2014 3:33am

Re: Nucular electronics - complete kit for ev! [beta]

Post by Turbomatic » Apr 06 2020 3:07am

john61ct wrote:
Apr 06 2020 2:40am
Do dealers jump the queue?
Yes

john61ct   100 GW

100 GW
Posts: 5420
Joined: Dec 18 2018 2:06pm

Re: Nucular electronics - complete kit for ev! [beta]

Post by john61ct » Apr 06 2020 6:46am

Please link to a list of dealers and their HQ location?

User avatar
VasiliSk   1 kW

1 kW
Posts: 338
Joined: Apr 10 2014 5:11am
Location: Russia
Contact:

Re: Nucular electronics - complete kit for ev! [beta]

Post by VasiliSk » Apr 06 2020 8:42am

this is not dealer, more like 'reseller'
there is no such list
bulk orders go out of queue

john61ct   100 GW

100 GW
Posts: 5420
Joined: Dec 18 2018 2:06pm

Re: Nucular electronics - complete kit for ev! [beta]

Post by john61ct » Apr 06 2020 8:53am

Reseller and dealer are synonyms in English


User avatar
cheeko   100 W

100 W
Posts: 169
Joined: Mar 25 2014 10:59pm
Location: Brisbane AU

Re: Nucular electronics - complete kit for ev! [beta]

Post by cheeko » Apr 06 2020 6:13pm

serious_sam wrote:
Mar 21 2020 1:30am
Are you using the "speed" or "speed/torque" control modes ? I had the same problem when using those modes. "Torque" mode works perfect though. I have 12F.

I'd like to be able to use those other modes sometimes, but it seems like an unuseable feature at this point in time.
I use Speed and Torque, I wanted to throttle it without wheelie all time.

Works well
20S7P Futr Beta 26" Mxus3k with the Unbelievable Nucular 12F

User avatar
cheeko   100 W

100 W
Posts: 169
Joined: Mar 25 2014 10:59pm
Location: Brisbane AU

Re: Nucular electronics - complete kit for ev! [beta]

Post by cheeko » Apr 06 2020 6:28pm

Hi Guys

Anyone have any issues upgrading firmware in screen or the controller, i have been unable to update at all, It hasnt been updated from factory every time says file error

Any ideas?
20S7P Futr Beta 26" Mxus3k with the Unbelievable Nucular 12F

User avatar
serious_sam   1 kW

1 kW
Posts: 342
Joined: Mar 05 2017 8:07am
Location: Australia

Re: Nucular electronics - complete kit for ev! [beta]

Post by serious_sam » Apr 06 2020 6:58pm

cheeko wrote:
Apr 06 2020 6:13pm
I use Speed and Torque, I wanted to throttle it without wheelie all time.
Works well
Interesting.

When I set "speed" or "speed+torque" modes, it seems like the controller tries to set the speed strictly to the throttle position, and does not allow coasting. I just get severe regen braking as I release the throttle while riding.

User avatar
cheeko   100 W

100 W
Posts: 169
Joined: Mar 25 2014 10:59pm
Location: Brisbane AU

Re: Nucular electronics - complete kit for ev! [beta]

Post by cheeko » Apr 06 2020 7:05pm

serious_sam wrote:
Apr 06 2020 6:58pm
cheeko wrote:
Apr 06 2020 6:13pm
I use Speed and Torque, I wanted to throttle it without wheelie all time.
Works well
Interesting.

When I set "speed" or "speed+torque" modes, it seems like the controller tries to set the speed strictly to the throttle position, and does not allow coasting. I just get severe regen braking as I release the throttle while riding.
I do agree when i tap throttle it goes directly to few hundred watts, i agree its much harder to coast :)
20S7P Futr Beta 26" Mxus3k with the Unbelievable Nucular 12F

User avatar
PITMIX   100 W

100 W
Posts: 195
Joined: Nov 18 2018 3:25pm
Location: France

Re: Nucular electronics - complete kit for ev! [beta]

Post by PITMIX » Apr 07 2020 3:54am

I am still looking for a solution to avoid the engine blocking when I release the accelerator in FW mode.
I tried in load to reduce the current of the FW but to eliminate this problem it is necessary to reduce until 0A. The FW is therefore useless in this case.
I wonder if the Deceleration lim setting in the Advenced control mode could limit the blocking effect and allow a smoother engine slowdown.
I tested off load it seems to work, but in load I have not yet tested because of the covid-19 confinement.
Aixam 550 Twin retrophite Qs 138 70H, Thermo-Nucular electronics 24F, LG Chem 20s 60Ah

User avatar
VasiliSk   1 kW

1 kW
Posts: 338
Joined: Apr 10 2014 5:11am
Location: Russia
Contact:

Re: Nucular electronics - complete kit for ev! [beta]

Post by VasiliSk » Apr 07 2020 4:30am

hi Pitmix,
You cant do anything about FW weakening, i need to make some software tweaks to keep FW current after throttle release

Post Reply