MXUS 3K Turbo (V3) 45mm Direct Drive Hub Motor

[L3chef]

Hello! Recieved my mxus v3 3k that I ordered from MXUS alibaba. Shouldn't the v3 come with 4mm phase wires as standard? I think mine are 2.5mm .. I don't have any caliper here with me to measure them but they don't look to be 4mm..

https://ibb.co/dOrzre
https://ibb.co/govg4z




Ouh I posted this in the wrong thread. My bad.

[Duncan75]

I've also received one with thin non-copper wires and had to replace them.

If you want to have piece of mind, it's advisable to upgrade the wires and bearings on these.

[wojtek]

I never had a motor that has 2 x hall sensors. Does it make sense to connect the respective wires together?

[minde28383]

I never had a motor that has 2 x hall sensors. Does it make sense to connect the respective wires together?

Never had an idea to connect respective wires. Second set of halls are in case first set brakes.

[ebike11]

Are the threads of the axle/axle nut M16 x 1.5 ???

[Jonboy]

16 with 10mm flat.. 1.5 tread

[6moe66]

Love the 3KT but can anyone explain the resolver poles?

I have set up my Kelly KLS with 23 Motor Poles(x2) as there are physically 46 magnets but what should i be setting the resolver poles to and what difference will it make when programming?

Also, has anyone got the motor temp sensor working on a Kelly controller? Specifically the KLS72 -S?