EU Group Buy *CLOSED* NEW MXUS3000W V3 TURBO!

Place for dealers to post items for sale.
Post Reply
Darowi   10 W

10 W
Posts: 73
Joined: Feb 27 2009 12:01pm

EU Group Buy *CLOSED* NEW MXUS3000W V3 TURBO!

Post by Darowi » Feb 26 2016 2:31am

I have seen that there is interest in buying the MXUS 3000W hub motor in the other thread, so I started this one to progress into a possible new group buy. My location is Hannover, Germany and I could think about organizing an EU + Switzerland group buy. Let´s start a list.

Specs: (see threads here for better info)

MXUS 3000 Turbo (V3)

- 145mm aluminium stator
- temp sensor
- 3.000W to 6.000W
- 3T or 4T windings
- ~9,3kg
- 142mm dropout

upgrades to V2:

- 4mm² phase wires
- 38H bended magnet
- 6004 Bearing 20mm id on one side
- 20mm axle (partial)
- double hall sensors

Price if the goal of 20pcs is reached:

280€ all taxes (for EU members) and PayPal included

Shipping with DHL, insured: (10kg packet)
Germany: 8€
EU: 20€
Europe - EU: 35€
Worldwide: 49€

Production time: 1-2 weeks
Shipping time: ~4 weeks SEA SHIPPING!

Update 08.03:

The "bended magnets" are not yet produced, therefore there is no photo available. BUT we can have it in our batch of motors!
I have attached 2 photos: 1 unpainted V3 "Turbo" Cover, 1 painted standard cover

Update 21.03.:

I have realized that it will take some more time and have arranged it with MXUS.
But let´s finish the list end of march?! Shouldn´t we? :wink:

PARTICIPATION CLOSED - TIME TO PAY
(Last minute orders: PM)

Summary

Object:
MXUS3000 V3 Turbo Motor
1. 45H aluminum stator with 0.35mm silicon steel sheets
2. 4MM² cable
3. 38H “bended” magnets
4. 21X3T OR 4TX16 windings
5. XT150 connector for phase wire 11G
6. 3 + 2x6 pin wires, double hallsensors
7. KTY84-130 thermosensor installed, wired to GND and the 6th wire
8. 10G spoke holes

Prize:
280€ + shipping (see above)

Warranty:
MXUS will provide 2 years warranty for the motors. (test or use with Vbatt <= 48V ;)

Prod. / shipping time:
about 6-7 weeks to you, insured and tracked


Directions:

1. Please send me a private message with following info:
Please use this Syntax only, questions separately via PM

Subject: MX3000

Message:
[Nick] - [PayPal Email] - [Full Name + Address] - [3T or 4T windings]

2. You will receive a PM from me containing my PayPal Account, my name, address and the amount for your location.

3. Please pay fast! ;)

4. I will keep the payment list updated. After completion I will start the order.

5. Once I`ll receive the motors, I will send them out to you insured and tracked.

Thanks,
Daniel

UPDATE:
To speed up the order process and because of demand, I offer in addition to the motors:

1. Laced V3 ("bended" magnet version) motor in 26" or 24" or 17" moto rim = +35€
2. Kunteng Sine wave controller with 12 MOSFETs and capable of 60A = +105€
3. LCD3 Display Unit for Kunteng Controller = +35€
Due to shipping limitations I can only ad a few laced orders, therefore: first asked, first served!

Spring is here, let´s get this thing onto the boat soon, shouldn´t we?
Daniel
Attachments
cover 1.jpg
cover 1.jpg (110.09 KiB) Viewed 1621 times
cover 2.jpg
cover 2.jpg (120.79 KiB) Viewed 1621 times
laced motor.jpg
laced motor.jpg (62.5 KiB) Viewed 4333 times
60A -12mosfet controller.jpg
60A -12mosfet controller.jpg (57.06 KiB) Viewed 4333 times
LCD 3.jpg
LCD 3.jpg (68.24 KiB) Viewed 4281 times
Last edited by Darowi on Apr 18 2016 12:49pm, edited 14 times in total.

Darowi   10 W

10 W
Posts: 73
Joined: Feb 27 2009 12:01pm

Re: NEW - EU Group Buy for MXUS 3000W Hub Motor

Post by Darowi » Feb 26 2016 2:36am

MXUS 3000W Hub Motor EU group buy interest list (please quote and add your name and quantity)

1 - Darowi

Craigh85   10 W

10 W
Posts: 84
Joined: Oct 06 2011 2:04pm
Location: United kingdom

Re: NEW - EU Group Buy for MXUS 3000W Hub Motor

Post by Craigh85 » Feb 26 2016 3:42am

1- CraigH85

BoomerChomsi   1 kW

1 kW
Posts: 359
Joined: Oct 27 2014 1:15pm
Location: ...Somewhere.....

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by BoomerChomsi » Feb 26 2016 5:05am

Thanks for starting up this groupbuy.

Any pictures of this motor? also dropout is 145mm right?
Believe and Do

Darowi   10 W

10 W
Posts: 73
Joined: Feb 27 2009 12:01pm

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by Darowi » Feb 26 2016 5:16am

142mm ;)

BoomerChomsi   1 kW

1 kW
Posts: 359
Joined: Oct 27 2014 1:15pm
Location: ...Somewhere.....

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by BoomerChomsi » Feb 26 2016 5:22am

Waauww even better, thanks mate! any price direction yet if we will buy 20-25 pieces?
Believe and Do

Suggs   100 W

100 W
Posts: 229
Joined: Sep 16 2015 3:42pm
Location: Yorkshire, UK

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by Suggs » Feb 26 2016 6:46am

Subject to price, put me down.

atomek1000   100 W

100 W
Posts: 108
Joined: Nov 08 2014 6:00pm
Location: Poland

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by atomek1000 » Feb 26 2016 5:28pm

what do you mean by
38H bended magnet
Height of magnets in this 3000w model should be 45mm.

User avatar
madin88   1 GW

1 GW
Posts: 3116
Joined: May 27 2013 2:02am
Location: Austria

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by madin88 » Feb 26 2016 5:50pm

atomek1000 wrote:what do you mean by
38H bended magnet
Height of magnets in this 3000w model should be 45mm.
38H should be the grade or strength of the neodymium magnets.
Darowi, from where do you have the info that MXUS now uses bended magnets? would be a nice little improvement :)
- 10kW belt drive with Neumotor 8057: [url]viewtopic.php?
- KTM Hardtail Pedelec / eZee V2 6T / 27,5" / Kelly KBSX @ 1,5kW / Torque PAS / CA-V3 / 13s4p Sanyo GA in Shark case

Darowi   10 W

10 W
Posts: 73
Joined: Feb 27 2009 12:01pm

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by Darowi » Feb 27 2016 2:00am

MXUS gave me the information that the magnets have been changed from 35 to 38H strengh, bended.

gabriel83   1 mW

1 mW
Posts: 10
Joined: Aug 03 2015 6:41am
Location: Mallorca, Spain

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by gabriel83 » Feb 27 2016 3:26am

+1Gabriel83

User avatar
madin88   1 GW

1 GW
Posts: 3116
Joined: May 27 2013 2:02am
Location: Austria

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by madin88 » Feb 27 2016 6:28am

Darowi wrote:MXUS gave me the information that the magnets have been changed from 35 to 38H strengh, bended.
normally the Magnets should have been already 38H before, but rectangular.
Darowi, could you ask for a pic of the rotor for confirmation?

btw: it may be worth to wait for the V3 version with M16 axle.
- 10kW belt drive with Neumotor 8057: [url]viewtopic.php?
- KTM Hardtail Pedelec / eZee V2 6T / 27,5" / Kelly KBSX @ 1,5kW / Torque PAS / CA-V3 / 13s4p Sanyo GA in Shark case

Darowi   10 W

10 W
Posts: 73
Joined: Feb 27 2009 12:01pm

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by Darowi » Feb 28 2016 5:07am

Yes, I already asked for photos and will ask for M16 also.
Will M16 still fit normal dropouts?

User avatar
madin88   1 GW

1 GW
Posts: 3116
Joined: May 27 2013 2:02am
Location: Austria

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by madin88 » Feb 28 2016 6:19am

Darowi wrote:Yes, I already asked for photos and will ask for M16 also.
Will M16 still fit normal dropouts?
depends on the frame, but for 99% i would say YES it will fit as both have 10mm wide flat part.
the only thing that might be a problem is adjusting the disc brake caliper properly, but compared to M14 the center of the axle only would be 1mm farther away what should be in the room for adjustments - and if not it should be easy to fix.
- 10kW belt drive with Neumotor 8057: [url]viewtopic.php?
- KTM Hardtail Pedelec / eZee V2 6T / 27,5" / Kelly KBSX @ 1,5kW / Torque PAS / CA-V3 / 13s4p Sanyo GA in Shark case

cwah   10 GW

10 GW
Posts: 4228
Joined: Jul 24 2011 5:42am
Location: Between paris and london

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by cwah » Feb 28 2016 10:38am

+1 for sure.

I may buy a second motor as spare if I can benefit a discount with 2 motors.

User avatar
Relanium   10 W

10 W
Posts: 95
Joined: Nov 25 2012 12:38pm
Location: Slovenia, EU

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by Relanium » Feb 28 2016 5:00pm

1 - Relanium

(thanks for doing this!)

Darowi   10 W

10 W
Posts: 73
Joined: Feb 27 2009 12:01pm

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by Darowi » Feb 29 2016 12:10pm

1- Darowi
1- CraigH85
1- BoomerChomsi ?
1- Suggs
1- Gabriel83
1- cwah
1- Relanium
----------------------------
7

Shaggy2Dope   1 µW

1 µW
Posts: 2
Joined: Feb 29 2016 1:51pm

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by Shaggy2Dope » Feb 29 2016 1:57pm

+1 - Shaggy2Dope

jase1979   10 mW

10 mW
Posts: 24
Joined: Dec 07 2014 1:45pm

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by jase1979 » Mar 03 2016 6:35am

1 jase1979 please.

Sr.Agaporni   100 W

100 W
Posts: 139
Joined: Jun 10 2014 4:46am
Location: Benidorm, Spain

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by Sr.Agaporni » Mar 03 2016 7:02am

+1 Sr.Agaporni

Thanks!

Darowi   10 W

10 W
Posts: 73
Joined: Feb 27 2009 12:01pm

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by Darowi » Mar 03 2016 10:26am

1- Darowi
1- CraigH85
1- BoomerChomsi ?
1- Suggs
1- Gabriel83
1- cwah
1- Relanium
1- Shaggy2Dope
1- jase1979
1- Sr.Agaporni

------------------------
10 = half time! :D

liamcaff   1 kW

1 kW
Posts: 429
Joined: Feb 17 2013 6:21pm
Location: Dublin

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by liamcaff » Mar 03 2016 6:16pm

1 - liamcaff pretty please

arcticfly   100 W

100 W
Posts: 175
Joined: Mar 30 2013 1:22pm
Location: Oslo, Norway

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by arcticfly » Mar 04 2016 7:32am

1- arcticfly

User avatar
Racer_X   1 kW

1 kW
Posts: 429
Joined: Oct 01 2009 5:48am
Location: Stockholm, Sweden

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by Racer_X » Mar 05 2016 3:19am

1 - Racer_X (4T windings)
Cannondale F8 MTB, 9c 9x7, Regen,ThreeSpeed Cruise. with torque plates. 12s3p or 18s2p depending on mood.Maxxis Holy Roller in the summer and Schwalbe Ice Spiker in winter.
Backup bike Schwinn Heavy Duti Beach Cruiser, 9c 9x7 front Regen,ThreeSpeed Cruise. with clamping dropouts, Maxxis Holy Roller in the summer and Schwalbe Ice Spiker in winter.

Polos   10 mW

10 mW
Posts: 33
Joined: Jan 26 2015 3:48pm

Re: NEW - EU Group Buy for NEW MXUS 3000W V3 TURBO! Hub Moto

Post by Polos » Mar 06 2016 2:54pm

1 - Polos

Post Reply