Cyclone 3000W Solid Motor Mounts

Place for dealers to post items for sale.
Post Reply
evolutiongts   10 kW

10 kW
Posts: 775
Joined: Dec 31 2013 5:13pm
Location: Alhambra, CA

Cyclone 3000W Solid Motor Mounts

Post by evolutiongts » Jul 07 2016 5:54pm

Cyclone 3000W Solid Motor Mounts

One piece Aluminum Motor Mount for rigidity and stiffness
Includes: One Piece Aluminum Motor Mount, Two aluminum mounting plates, and hardware.
Mounting brackets have 4 bolts on each side vs 2 on the standard Cyclone 3000W
Motor mount is 73mm width if you have a 68mm BB you will need a spacer.

I made these out of the frustration I had with the stock motor mounts which will twist and break because of the high torque.

$99 shipped.

Image

Image

Image
http://www.electricrt.com
Electric Race Technologies

Schwinn 405 2WD Track Bike 18KW
EDGE 1500W Hub / MXUS 3K Turbo
ASI BAC 2000 / BAC 4000 Bluetooth
viewtopic.php?f=6&t=93079

10Kw KMX death trike
MUXUS 3K Turbo
Sabvoton 72V150A
Moto Wheels all around
Front Suspension Kit
viewtopic.php?f=6&t=83423

Giant Trance 4 Full Suspension
Cyclone 3000W
74V 3000W
http://endless-sphere.com/forums/viewto ... =6&t=59005

misterb   10 mW

10 mW
Posts: 30
Joined: Sep 16 2013 3:31pm
Location: Rockwall, TX

Re: Cyclone 3000W Solid Motor Mounts

Post by misterb » Aug 31 2016 2:10pm

I'm considering picking up your cyclone kit with the upgraded mount. The bike will have 68mm BB. Your site mentions that the upgraded kit is easier to mount, and I don't mind paying a bit more for easing the installation. Would the beefier mount still allow for mounting inside the triangle(above the downtube) assuming there is room? Besides the mount being more robust, what other upsides are there to your kit versus Luna's ?

evolutiongts   10 kW

10 kW
Posts: 775
Joined: Dec 31 2013 5:13pm
Location: Alhambra, CA

Re: Cyclone 3000W Solid Motor Mounts

Post by evolutiongts » Sep 02 2016 1:28pm

misterb wrote:I'm considering picking up your cyclone kit with the upgraded mount. The bike will have 68mm BB. Your site mentions that the upgraded kit is easier to mount, and I don't mind paying a bit more for easing the installation. Would the beefier mount still allow for mounting inside the triangle(above the downtube) assuming there is room? Besides the mount being more robust, what other upsides are there to your kit versus Luna's ?
Hello,

Yes the mount allows for mounting it inside the triangle, assuming there is room. The motor mount single handily makes this kit complete, the stock mounts will tend, flex, and bend under load. With the beefier mounts this isn't a problem.
http://www.electricrt.com
Electric Race Technologies

Schwinn 405 2WD Track Bike 18KW
EDGE 1500W Hub / MXUS 3K Turbo
ASI BAC 2000 / BAC 4000 Bluetooth
viewtopic.php?f=6&t=93079

10Kw KMX death trike
MUXUS 3K Turbo
Sabvoton 72V150A
Moto Wheels all around
Front Suspension Kit
viewtopic.php?f=6&t=83423

Giant Trance 4 Full Suspension
Cyclone 3000W
74V 3000W
http://endless-sphere.com/forums/viewto ... =6&t=59005

progrock   100 W

100 W
Posts: 219
Joined: Oct 02 2017 8:47am

Re: Cyclone 3000W Solid Motor Mounts

Post by progrock » Oct 23 2017 3:20pm

Oh man, found this post from a picture of the mount I was drooling over. Is there any possible way to still get this mount?... or if not, are there any other similar upgraded mounts that are available for the cyclone 3000w mid-drive?... I desperately want one.

ebike11   100 kW

100 kW
Posts: 1117
Joined: Nov 16 2013 8:01pm
Location: Korea

Re: Cyclone 3000W Solid Motor Mounts

Post by ebike11 » Oct 23 2017 6:27pm

Looks good

Megsy73   1 W

1 W
Posts: 52
Joined: Mar 25 2013 4:10pm

Re: Cyclone 3000W Solid Motor Mounts

Post by Megsy73 » Oct 23 2017 10:41pm

I think i prefer the AFT C3000w brackets : http://www.aft-ebike.com/c3000w.html

They seem to use thicker aluminium plates whereas this one uses the original thin mount plates ? As it just has a solid block in the middle that would weigh a lot? Also the AFT one seems to grab the motor from the outside as well as inside motor mounts i.e it should be stronger again. Also it seems they have a controller mount location for the kelly controllers...


What frame clamp was used? Is it the regular hose clamp that cyclone supplies ? I think AFT has some other stronger type of frame clamp..??


Has anyone bought or tried the AFT version ?

Alex07   100 W

100 W
Posts: 137
Joined: Jun 27 2016 4:00am

Re: Cyclone 3000W Solid Motor Mounts

Post by Alex07 » Nov 04 2017 8:41pm

ohh cool some nice mounts for the c3000w, yeah i may go the AFT since it suits the kelly controller too i will get

Post Reply