Any interest in a $47 motor mount

Place for dealers to post items for sale.
Post Reply
gearsarespinning   1 mW

1 mW
Posts: 17
Joined: Oct 01 2015 2:03pm

Any interest in a $47 motor mount

Post by gearsarespinning » Aug 20 2016 11:54pm

I purchased a couple motors from Ollin and found that my mount didn't fit. I finally got around to making one that fits these motors and wanted to see if anyone else is interested in them before I start making and selling them. I have a prototype now and a few more clamp parts due here next week - had to refine them a bit. Here is the plan if there is interest.

Clamp for Calliber trucks - 25.00
Motor mount for Ollin (38mm hole pattern) motor - 25.00
Motor mount with 30mm hole pattern - 25.00

If you bought ONE clamp and ONE motor mount together - 47.00 + free USA shipping

The mount will be raw 6061 aluminum (I'll knock the edges off so they are not sharp) and comes with hardware for the mount and motor.
It is fully adjustable- I am using 36/16 gearing with 255 belt and the mount still has room so could probably do 265 depending on gearing.

If I get 20 or so people wanting them I can have them done in two weeks or sooner if I get a good sample of the clamp in next week.

link to esk8 forum
http://www.electric-skateboard.builders ... 5-200/7918

[moderator edit to fix title]
Attachments
ab4dc81a41db36e8170800c97fb446ffbf04158e_1_375x500.JPG
ab4dc81a41db36e8170800c97fb446ffbf04158e_1_375x500.JPG (69.11 KiB) Viewed 1328 times
IMG_2589.JPG
IMG_2582 (1).JPG
9ade21aec9f713f1bed502e0bf41af2e251e076d_1_375x500.JPG
9ade21aec9f713f1bed502e0bf41af2e251e076d_1_375x500.JPG (72.76 KiB) Viewed 1328 times
b2f14e8347653ebaa2244d5d057d6b9aed399382_1_604x500.JPG
b2f14e8347653ebaa2244d5d057d6b9aed399382_1_604x500.JPG (150.44 KiB) Viewed 1328 times
c26c3df5333efbdebf97feafb8ce167f1fb053b6_1_375x500.JPG
c26c3df5333efbdebf97feafb8ce167f1fb053b6_1_375x500.JPG (81.35 KiB) Viewed 1328 times

User avatar
bandaro   10 kW

10 kW
Posts: 528
Joined: Jun 01 2010 2:17am
Location: Canberra, Australia

Re: Any inteest in a 47.00 motor mount

Post by bandaro » Aug 21 2016 8:11pm

Looks sharp, but you might want to look into using washers for the motor plate-clamp join, they will rip through otherwise.

On another note, could be worth looking into using countersunk hardware on the mount plate so it can be pushed up closer to the belt/pulley without interference. This could give the extra few mm needed to use it as a dual motor mount setup. If that's stainless hardware, the people on the coast might not be happy.

gearsarespinning   1 mW

1 mW
Posts: 17
Joined: Oct 01 2015 2:03pm

Re: Any inteest in a 47.00 motor mount

Post by gearsarespinning » Aug 22 2016 2:39am

Thanks bandero -Yes the hardware will be stainless and there will be the same stainless washers on the SHCS that are on the button heads. The SHCS are low head and are the same height as the button heads. The mount is made with a waterjet so putting in a step channel for a countersink would make it a 65.00+ mount and no different than anyone else - except it will fit (and be adjustable) Ollins badass little 5065 motor. My goal was to be about 20.00 less expensive for those just being introduced into esk8 and overwhelmed by pricing. working on a 20.00 to 25.00 HTD 36T wheel gear and outer washer as well- hopefully almost there. Thanks again for your input.

gearsarespinning   1 mW

1 mW
Posts: 17
Joined: Oct 01 2015 2:03pm

Motor mounts 45.00 free shipping

Post by gearsarespinning » Sep 19 2016 7:34pm

I have motor mounts for Ollin 5065 motors and 30mm dia center to center (21mm x 21mm square center to center). I can also make other sizes you just need to provide the hole pattern.

Pricing
Clamp for Calliber trucks - 25.00
Motor mount for Ollin (38mm hole pattern) motor - 25.00
Motor mount with 30mm hole pattern - 25.00

If you bought ONE clamp and ONE motor mount together - 45.00 + free USA shipping

The mount is raw 6061 aluminum and comes with hardware for the mount and motor.
It is fully adjustable- I am using 36/16 gearing with 255 belt and the mount still has room so could probably do 265 depending on gearing.

See Interest for Ollin motor mount OM5065-200 http://www.electric-skateboard.builders ... 5-200/7918

gearsarespinning   1 mW

1 mW
Posts: 17
Joined: Oct 01 2015 2:03pm

Motor mounts 45.00 free shipping

Post by gearsarespinning » Sep 19 2016 7:37pm

I have motor mounts for Ollin 5065 motors and 30mm dia center to center (21mm x 21mm square center to center). I can also make other sizes just send me the hole pattern.

Pricing
Clamp for Calliber trucks - 25.00
Motor mount for Ollin (38mm hole pattern) motor - 25.00
Motor mount with 30mm hole pattern - 25.00

If you bought ONE clamp and ONE motor mount together - 45.00 + free USA shipping

The mount is raw 6061 aluminum and comes with hardware for the mount and motor.
It is fully adjustable- I am using 36/16 gearing with 255 belt and the mount still has room so could probably do 265 depending on gearing.

See http://www.electric-skateboard.builders ... 5-200/7918 for more details

User avatar
amberwolf   100 GW

100 GW
Posts: 32240
Joined: Aug 17 2009 6:43am
Location: Phoenix, AZ, USA, Earth, Sol, Local Bubble, Orion Arm, Milky Way, Local Group
Contact:

Re: Any interest in a $47 motor mount

Post by amberwolf » Sep 20 2016 3:29am

viewtopic.php?f=13&t=152
2. Please keep all advertisements for items which are relevant to these forums in the Online Market section http://endless-sphere.com/forums/viewforum.php?f=23 (clarification: all ads of any kind must go in the Online Market, in the Items For Sale - New / - Used sections. If it's discussing or promoting a product you or your company sells, it's an ad, and can't be posted in the discussion areas).
viewtopic.php?f=31&t=25446
Do :
- Do describe in detail what you are selling
- Do describe in the SUBJECT LINE what you are selling instead of " For Sale " or " Stuff " .
- Do include Pictures if possible
- Specify if you offer support, or if you know nothing about the product..
- Do indicate your location < canada, usa, uk, etc.. > and are you willing to ship outside your country !?
- Price, with or without shipping


Do Not :
- Do NOT start multiple posts for the same item
- Do NOT cross post your stuff in other's posts for sale
- Do NOT use other peoples pictures for your items unless you have permission

gearsarespinning   1 mW

1 mW
Posts: 17
Joined: Oct 01 2015 2:03pm

Re: Any interest in a $47 motor mount

Post by gearsarespinning » Sep 20 2016 11:39am

Sorry @amberwolf. This is no longer just getting interest, I have have developed the mounts and have stock.

Can you put this heading back where it was in the general discussion - I was gauging interest, getting feedback on pricing and not selling anything.

Also please change this heading back to what it was as I am now selling the mounts and not gauging interest as this title says. they are not 47.00 and no longer a prototype. Just dont want anyone else to think it is the same post or thinking they are a prototype and not for sale, which they are now.

Thanks

User avatar
amberwolf   100 GW

100 GW
Posts: 32240
Joined: Aug 17 2009 6:43am
Location: Phoenix, AZ, USA, Earth, Sol, Local Bubble, Orion Arm, Milky Way, Local Group
Contact:

Re: Any interest in a $47 motor mount

Post by amberwolf » Sep 20 2016 2:45pm

You can edit the first post in the thread to change the title, details, etc.

The posts cannot go outside this forum section because you are advertising for a product, and those must go in this section; advertising of any kind is not allowed outside the Online Market (as quoted in the rules).

Post Reply