N.E.S.E. the no solder module

Place for dealers to post items for sale.
thepronghorn   1 kW

1 kW
Posts: 305
Joined: Mar 27 2011 8:07pm
Location: Bay Area, California

Re: N.E.S.E. the no solder module

Post by thepronghorn » Nov 03 2020 2:19pm

agniusm wrote:
Nov 03 2020 6:43am
thepronghorn wrote:
Nov 02 2020 4:00am
The link in his signature works for me (albeit slowly). I think PLA can work, but PETG/ABS/PC are much preferred due to their higher temperature handling capabilities.
Thats weird. I moved my site to bluehost which is in US so americans would have faster service, gues its not that great
I think it's faster than when I was checking a couple months ago, so if you moved in that timeframe, it is making a difference. It's about 3s for me, so not too bad, but it's still noticeable compared to most sites.

User avatar
agniusm   10 MW

10 MW
Posts: 2496
Joined: Apr 16 2011 3:06pm
Location: Lithuania, Zarasai
Contact:

Re: N.E.S.E. the no solder module

Post by agniusm » Nov 16 2020 6:49am

UPDATE:
26650 hardware is coming mid December.
There will be another winter sale for a month as usual.
I will start selling V2 modules which are smaller.
I will have some V1 old stock at half price.
Now i need to hope all this pandemic nonsense does not affect me too much and i can deliver on time

User avatar
agniusm   10 MW

10 MW
Posts: 2496
Joined: Apr 16 2011 3:06pm
Location: Lithuania, Zarasai
Contact:

Re: N.E.S.E. the no solder module

Post by agniusm » Nov 16 2020 1:40pm

Some sexy batteries people make

Image

Image

Image

Photos of Janpom @ esk8.news

User avatar
agniusm   10 MW

10 MW
Posts: 2496
Joined: Apr 16 2011 3:06pm
Location: Lithuania, Zarasai
Contact:

Re: N.E.S.E. the no solder module

Post by agniusm » Nov 28 2020 1:09pm

Anyone here with VR? Testing out platform for people without 3D printers to have my modules looked at in VR or XR
[youtube]7sgVdAzFq-Q[/youtube]

caza   10 mW

10 mW
Posts: 20
Joined: Nov 23 2020 11:39pm

Re: N.E.S.E. the no solder module

Post by caza » Nov 28 2020 3:55pm

Are there any US distributors of these modules?

User avatar
agniusm   10 MW

10 MW
Posts: 2496
Joined: Apr 16 2011 3:06pm
Location: Lithuania, Zarasai
Contact:

Re: N.E.S.E. the no solder module

Post by agniusm » Nov 29 2020 2:55am

caza wrote:
Nov 28 2020 3:55pm
Are there any US distributors of these modules?
Sorry, there is none.

Pat Eaton   10 W

10 W
Posts: 72
Joined: Aug 31 2009 9:12pm
Location: Abbotsford, British Columbia

Re: N.E.S.E. the no solder module

Post by Pat Eaton » Dec 01 2020 12:48am

Thanks Agniusm for these great modules. I just put together a 5p10s pack with recovered Dr Bass Konion cells.

These modules fit the bill for my needs!

User avatar
agniusm   10 MW

10 MW
Posts: 2496
Joined: Apr 16 2011 3:06pm
Location: Lithuania, Zarasai
Contact:

Re: N.E.S.E. the no solder module

Post by agniusm » Dec 01 2020 1:28am

Thank you Pat for sharing!

User avatar
agniusm   10 MW

10 MW
Posts: 2496
Joined: Apr 16 2011 3:06pm
Location: Lithuania, Zarasai
Contact:

Re: N.E.S.E. the no solder module

Post by agniusm » Dec 01 2020 1:28am

wintersale2021_s.jpg
wintersale2021_s.jpg (117.98 KiB) Viewed 948 times
21700 and 26650 hardware and modules will be available at the end of December. 18650 ships as usual.
Shipping will incur delays due to Christmas and pandemic so bear that in mind when ordering.
Thank you for support

klemkas   100 µW

100 µW
Posts: 9
Joined: Oct 16 2009 2:50pm

Re: N.E.S.E. the no solder module

Post by klemkas » Dec 05 2020 10:17am

Nothing much to show for, but i assembled a 7p7s pack to look how it is charging, needs more work to put the wires all neatly. I saw a 3d printed box few pages back, looks dope, maybe i'll do that.

I had a little problem, i didn't test the enclosures with all 7 cells inside, i put in one - checked everything, looked great, so i printed all enclosures. Then i put in 7 cells - oops, they don't want to close anymore :) Eventually with some effort i closed and screwed them together. I would print them half or 1 mm wider, had i checked before. At first i printed in black PLA, then bought PET-G. Both seem to hold fine so far. Time will tell. PLA is more brittle, but i don't see any problems yet.

In comparison to Vruzend, this is awesome. It took 2 or 3 days to assemble that pack with Vruzend, my fingers and hands were sore, bruized and cut. I assembled Nese in 15 minutes, not counting the preparation and bms wire soldering. And Vruzend contacts are bad, you have to double check everything multiple times. They also break. I saw they have a new version now, mine is old.

After charging i found that one cell group doesn't hold the same voltage as others, probably there's a bad cell in a group, i can pinpoint it and replace at once. You can't do that with soldered cells.
All in all, i'm very happy with this product, it suits my needs.
Attachments
1.jpg
1.jpg (231.22 KiB) Viewed 903 times
2.jpg
2.jpg (210.16 KiB) Viewed 903 times
3.jpg
3.jpg (292.1 KiB) Viewed 903 times

User avatar
agniusm   10 MW

10 MW
Posts: 2496
Joined: Apr 16 2011 3:06pm
Location: Lithuania, Zarasai
Contact:

Re: N.E.S.E. the no solder module

Post by agniusm » Dec 05 2020 11:28am

@klemkas, thank you for the overview. Lids not closing is normal and that suppose to happen. Plastic is soft and cells bow it out. Thats why the lids have edges that catch on the bottom part. You need to squeeze the bottom part a bit to close the lid. Its a compression kit so the compression must be maintained and adding 0.5-1mm to the width will make it worse.
Happy you got it all done.

klemkas   100 µW

100 µW
Posts: 9
Joined: Oct 16 2009 2:50pm

Re: N.E.S.E. the no solder module

Post by klemkas » Dec 05 2020 2:27pm

Ha, good to know, then i did everything correctly :)

caza   10 mW

10 mW
Posts: 20
Joined: Nov 23 2020 11:39pm

Re: N.E.S.E. the no solder module

Post by caza » Dec 05 2020 4:28pm

What are the highest amps these modules have been tested with?

User avatar
agniusm   10 MW

10 MW
Posts: 2496
Joined: Apr 16 2011 3:06pm
Location: Lithuania, Zarasai
Contact:

Re: N.E.S.E. the no solder module

Post by agniusm » Dec 05 2020 4:50pm

caza wrote:
Dec 05 2020 4:28pm
What are the highest amps these modules have been tested with?
Over 200A on 6P but that is not recommended :)

[youtube]93JBo87LJiU[/youtube]

User avatar
tylerwatts   100 W

100 W
Posts: 155
Joined: Sep 14 2012 3:10am

Re: N.E.S.E. the no solder module 21% OFF WINTER SALE

Post by tylerwatts » Dec 10 2020 7:02am

@klemkas are those packs the same size? 7s7p. Or are there more cells in the Vruzend? I always worried the NESE aren't as dense but these look great! Winter sale is tempting

Cheers
Tyler



User avatar
agniusm   10 MW

10 MW
Posts: 2496
Joined: Apr 16 2011 3:06pm
Location: Lithuania, Zarasai
Contact:

Re: N.E.S.E. the no solder module 21% OFF WINTER SALE

Post by agniusm » Dec 10 2020 12:33pm

tylerwatts wrote:
Dec 10 2020 7:02am
@klemkas are those packs the same size? 7s7p. Or are there more cells in the Vruzend? I always worried the NESE aren't as dense but these look great! Winter sale is tempting Image

Cheers
Tyler
I can answer for him :) NESE is more dense than vruzend. Its even more valid when you cosider that vruzend still needs to be enclosed

User avatar
agniusm   10 MW

10 MW
Posts: 2496
Joined: Apr 16 2011 3:06pm
Location: Lithuania, Zarasai
Contact:

Re: N.E.S.E. the no solder module 21% OFF WINTER SALE

Post by agniusm » Dec 25 2020 12:36pm

I am having delays with restocking. Cause of this delay, people who will contact me before 2nd of January will get their 21% winter discount anyway as i could not manage supply earlier. Just write to agnius@1865o.com, describe what you will need and will get it sorted.

User avatar
tomjasz   10 GW

10 GW
Posts: 4342
Joined: Mar 29 2014 1:45pm
Location: Out riding, MN USA
Contact:

Re: N.E.S.E. the no solder module 21% OFF WINTER SALE

Post by tomjasz » Jan 02 2021 12:43am

agniusm wrote:
Dec 25 2020 12:36pm
I am having delays with restocking. Cause of this delay, people who will contact me before 2nd of January will get their 21% winter discount anyway as i could not manage supply earlier. Just write to agnius@1865o.com, describe what you will need and will get it sorted.
Message sent. Code didn’t work.THANKS!
Thanks Justin_le we're here thanks to you. All the best to the mods for their tireless work keeping it on an even keel.

999zip999   100 GW

100 GW
Posts: 9934
Joined: Jan 10 2010 1:40pm
Location: Dana Point So. Cal

Re: N.E.S.E. the no solder module 21% OFF WINTER SALE

Post by 999zip999 » Jan 02 2021 12:53pm

Email send exciting.

User avatar
agniusm   10 MW

10 MW
Posts: 2496
Joined: Apr 16 2011 3:06pm
Location: Lithuania, Zarasai
Contact:

Re: N.E.S.E. the no solder module 21% OFF WINTER SALE

Post by agniusm » Jan 04 2021 4:12am

Promotion extended till 2021.01.31
Parts are almost here.

User avatar
agniusm   10 MW

10 MW
Posts: 2496
Joined: Apr 16 2011 3:06pm
Location: Lithuania, Zarasai
Contact:

Re: N.E.S.E. the no solder module 21% OFF WINTER SALE

Post by agniusm » Jan 08 2021 1:21pm

All three, 18650 vs 21700/20700 vs 26650

Image

User avatar
spuzzete   100 W

100 W
Posts: 191
Joined: Dec 03 2011 3:12pm
Location: Alberta, Canada

Re: N.E.S.E. the no solder module 21% OFF WINTER SALE

Post by spuzzete » Jan 14 2021 4:08am

agniusm wrote:
Jan 04 2021 4:12am
Promotion extended till 2021.01.31
Parts are almost here.
PM Sent 8)

mark 324   1 W

1 W
Posts: 59
Joined: Aug 31 2018 3:02pm

Re: N.E.S.E. the no solder module

Post by mark 324 » Jan 27 2021 8:42pm

I ordered 1 module and its so long takes delivery dude u most joking !!!!!!!!

mark 324   1 W

1 W
Posts: 59
Joined: Aug 31 2018 3:02pm

Re: N.E.S.E. the no solder module

Post by mark 324 » Jan 27 2021 8:50pm

U can cancel I don’t want anymore

john61ct   100 GW

100 GW
Posts: 7293
Joined: Dec 18 2018 2:06pm

Re: N.E.S.E. the no solder module

Post by john61ct » Jan 27 2021 10:26pm

Do you mean more than two months or something?

Did you ask for a quote on express carrier?

Post Reply