Powervelocity.com wrote: ↑
Jan 10, 2018 11:55 am
Yes, honesty is a great virtue and much appreciated
But 180v and 400 battery amps is really an overkill even for QS273. 200A is probably the most it can sustain before failure.
Are you sure you are talking about 400A battery amps, not phase amps?
Mywpn wrote: ↑
Jan 10, 2018 4:45 am
To be honest just an electrIc enduro eeb with a QS273
Greetings PowerVelocity, i'm still not exactly expert at what you guys know. Like Mywpn, i have the same motor but a little different. I recently purchased a couple of QS-273-50H 8000w hub motors [1250RPM@96v - winding is 55*3T] and QS told me i would need a 96v50ah or 96v60ah battery to be able to do the 75mph that the motor was built for and i'm looking for range. Can you build this type of battery with your BMS? Do you supply charger for this also in this type of setup? I have the Kelly Controller KLS96501-8080H and like Mywpn i want to be pulling around 210amp. Like Mywpn also, i'm not new to high speed vehicles, hence why the request for the high voltage battery to go with my Kelly controllers. Let me know, very interested.