Mobipus Controller Official

Place for dealers to post items for sale.
Mobipus Official   1 mW

1 mW
Posts: 13
Joined: Nov 02 2018 10:31pm

Mobipus Controller Official

Post by Mobipus Official » Nov 02 2018 11:59pm

Hi everyone,

This is the Mobipus Controller official.
So here we are promoting you with our product line.

The Controllers will be sold via our retailers. Please PM if you were to look for your closest retailer.

Mobipus 72100 Controller
Operating Votage Range : 36V-90V
Continous Battery Current: 100A
Continous Phase Current : 250A
Rated Power : 7.2kw

Mobipus 72150 Controller
Operating Votage Range : 36V-90V
Continous Battery Current: 150A
Continous Phase Current : 250A
Rated Power : 10.8kw

Mobipus 72200 Controller
Operating Votage Range : 36V-90V
Continous Battery Current: 200A
Continous Phase Current : 350A
Rated Power : 14.4kw

Mobipus 72400 Controller
Operating Votage Range : 36V-90V
Continous Battery Current: 400A
Continous Phase Current : 600A
Rated Power : 28.8kw

Mobipus 72600 Controller
Operating Votage Range : 36V-90V
Continous Battery Current: 600A
Continous Phase Current : 800A
Rated Power : 43.2kw

Mobipus 96400 Controller (6-7weeks Lead time)
Operating Votage Range : 60V-134V
Continous Battery Current: 400A
Continous Phase Current : 600A
Rated Power : 48kw

72100/72150/72200 Liquid Heatsink

72100/72150/72200 Air Heatsink

72600/72400/96400 Controller Liquid Heatsink

WIFI connector

Rs485 Cable


Purchase of controller will have initial setup service, we guarantee your build will run properly instead of leaving you confused with the product.
Our experienced engineer can also give you suggestion and help you with your build regarding battery selection, motor selection and more.

Features:

- Mobipus controller has over 300 programmable settings for you to toggle with, allow for a high degree of customization.
- The rating of our controller is all rated continuous, the peak current can easily go 100a-200a over the rated current. High continuous battery current allows you to have a consistent acceleration from the beginning to the end.
- Compact, Lighter weight, Reliable with high energy density.
- Hybrid Drive Mode allowing for both six-step, FOC or a mix of both.
- Field Weakening algorithm allowing you to go exceed the KV value of the motor.
- Hall sensor, PWM Encoder, Sin/Cos Encoder supported.
- Insane output, E-Bike race ready. With proper design, the controller has the potential of making 0-100km/h in 3.8 seconds with a top speed of over 160km/h on an E-scooter.
- You can design the linearity of throttle output to match your desired riding experience.
- Matches all PMSM motors.
- Regen Braking.

All of our controllers have a warranty of 1 year, with great customer service. Feel free to approach us.

Heres a sample build using the 72600.
https://www.youtube.com/watch?v=lD6UMxvWTLI

Help and advice or more information regarding the controller. you can contact our engineer through :
Danny@Mobipus.com

Cheers,

Mobipus.
Attachments
User Manual.pdf
(778.53 KiB) Downloaded 167 times
Last edited by Mobipus Official on Nov 26 2018 12:19am, edited 2 times in total.

User avatar
liveforphysics   100 GW

100 GW
Posts: 14046
Joined: Oct 29 2008 1:48am
Location: Santa Cruz, CA, USA

Re: Mobipus Controller Official

Post by liveforphysics » Nov 03 2018 3:27am

Thank you for making great products!
Each carcinogen vapor exposure includes a dice roll for cancer.

Each mutagen vapor exposure includes a dice roll for reproductive genetic defects in your children.

Each engine start sprays them into a shared atmosphere which includes beings not offered an opportunity to consent accepting these cancer experiences and defective genetics life experiences.

Every post is a free gift to the collective of minds composing the living bleeding edge of LEV development on our spaceship.

User avatar
Alan B   100 GW

100 GW
Posts: 7492
Joined: Sep 11 2010 7:43am
Location: San Francisco Bay Area, USA
Contact:

Re: Mobipus Controller Official

Post by Alan B » Nov 03 2018 5:57am

Welcome to ES.

Good to see better access to these products.

I fixed one typo in the initial posting (1500A -> 150A on 72150).

bionicon   100 W

100 W
Posts: 262
Joined: Jun 28 2015 2:29pm
Location: Belgium

Re: Mobipus Controller Official

Post by bionicon » Nov 03 2018 1:55pm

Is there somewhere a website, or is it just here available?

User avatar
Alan B   100 GW

100 GW
Posts: 7492
Joined: Sep 11 2010 7:43am
Location: San Francisco Bay Area, USA
Contact:

Re: Mobipus Controller Official

Post by Alan B » Nov 03 2018 2:44pm

The manual says www.mobipus.com

User avatar
tahitiboob   1 W

1 W
Posts: 60
Joined: Dec 19 2017 6:02pm

Re: Mobipus Controller Official

Post by tahitiboob » Nov 03 2018 5:47pm

in october 2017 i was very interessed about the controleur 72600 but the price was 1100 usd and the 72200 was 470 usd

but he dont have stock i buy sabvoton

Speedtospare   1 mW

1 mW
Posts: 10
Joined: Apr 29 2010 10:11pm

Re: Mobipus Controller Official

Post by Speedtospare » Nov 04 2018 10:18am

I'm in the market for a new controller. Motor is QS 205 V3. I was running a kelly KLS72300S. I'm Looking for a 72++V 200A+ programmable Sinusoidal controller. What do you have?

Mobipus Official   1 mW

1 mW
Posts: 13
Joined: Nov 02 2018 10:31pm

Re: Mobipus Controller Official

Post by Mobipus Official » Nov 04 2018 9:54pm

amberwolf wrote:
Nov 03 2018 11:02am
I don't see any prices other than shipping cost. Does that mean the controllers are free other than that? ;)

If not, it's required to post prices.
Prices varies with quantity, Email or PM for prices.

Cheers. :wink:

Mobipus Official   1 mW

1 mW
Posts: 13
Joined: Nov 02 2018 10:31pm

Re: Mobipus Controller Official

Post by Mobipus Official » Nov 04 2018 9:55pm

liveforphysics wrote:
Nov 03 2018 3:27am
Thank you for making great products!
Thank you for your support! :D

Mobipus Official   1 mW

1 mW
Posts: 13
Joined: Nov 02 2018 10:31pm

Re: Mobipus Controller Official

Post by Mobipus Official » Nov 04 2018 9:57pm

Alan B wrote:
Nov 03 2018 5:57am
Welcome to ES.

Good to see better access to these products.

I fixed one typo in the initial posting (1500A -> 150A on 72150).
Thanks, you can PM or email for any questions related to going electric, helping the world go electric is our duty.

Mobipus Official   1 mW

1 mW
Posts: 13
Joined: Nov 02 2018 10:31pm

Re: Mobipus Controller Official

Post by Mobipus Official » Nov 04 2018 10:01pm

Alan B wrote:
Nov 03 2018 2:44pm
The manual says www.mobipus.com
The site was ages ago, it was used before we switch to OEM market. Now that we see more and more enthusiastic are into powerful ebike conversion, so here we are again.

The site will be updated again soon! Thanks for your support!

Cheers. :wink:

Mobipus Official   1 mW

1 mW
Posts: 13
Joined: Nov 02 2018 10:31pm

Re: Mobipus Controller Official

Post by Mobipus Official » Nov 04 2018 10:04pm

tahitiboob wrote:
Nov 03 2018 5:47pm
in october 2017 i was very interessed about the controleur 72600 but the price was 1100 usd and the 72200 was 470 usd

but he dont have stock i buy sabvoton
I am sorry if you had an unpleasant time with our former service. Our company has improved in every aspect, your experience and satisfaction is very important.

If you are still interested or you just wanted to ask questions regarding electric conversion, you are welcome to Pm or email me.

Mobipus Official   1 mW

1 mW
Posts: 13
Joined: Nov 02 2018 10:31pm

Re: Mobipus Controller Official

Post by Mobipus Official » Nov 04 2018 10:06pm

bionicon wrote:
Nov 03 2018 1:55pm
Is there somewhere a website, or is it just here available?
We did have a website before the OEM market, but it havent been updated for quiet a long time. The product line is different now, if you wish to know more about our product or about electric project. Feel free to Pm or Email. :D

Mobipus Official   1 mW

1 mW
Posts: 13
Joined: Nov 02 2018 10:31pm

Re: Mobipus Controller Official

Post by Mobipus Official » Nov 04 2018 10:15pm

Speedtospare wrote:
Nov 04 2018 10:18am
I'm in the market for a new controller. Motor is QS 205 V3. I was running a kelly KLS72300S. I'm Looking for a 72++V 200A+ programmable Sinusoidal controller. What do you have?
The 72200 is a good option for your application.
Our rating is different than most of other companies, 200A is rated phase current for Mobipus while 300A phase current is mainly used to name their controller by other brands.
PM or Email for more information.
:D

User avatar
Merlin   1 MW

1 MW
Posts: 1544
Joined: Jan 29 2013 10:00am
Location: europe

Re: Mobipus Controller Official

Post by Merlin » Nov 05 2018 5:53am

Mobipus Official wrote:
Nov 04 2018 10:01pm
Alan B wrote:
Nov 03 2018 2:44pm
The manual says www.mobipus.com
The site was ages ago, it was used before we switch to OEM market. Now that we see more and more enthusiastic are into powerful ebike conversion, so here we are again.

The site will be updated again soon! Thanks for your support!

Cheers. :wink:
sounds like:
- selling to private ppl
- going oem....give now a f**k on private ppl
- going oem doesnt work
- switching back to try selling to private ppl.

User avatar
macribs   1 GW

1 GW
Posts: 3486
Joined: Jul 22 2014 5:59pm

Re: Mobipus Controller Official

Post by macribs » Nov 06 2018 9:38am

A while back, guess spring of 2017 there was talk about mobipus also had a dlc-28 clone motor. I believe that motor is what is used in the 50KW electric supermoto build but I am not sure. Will that dlc-28 clone motor also be available to ES members? It seems like a perfect match for the 72600 controller....

Mobipus Official   1 mW

1 mW
Posts: 13
Joined: Nov 02 2018 10:31pm

Re: Mobipus Controller Official

Post by Mobipus Official » Nov 06 2018 8:08pm

macribs wrote:
Nov 06 2018 9:38am
A while back, guess spring of 2017 there was talk about mobipus also had a dlc-28 clone motor. I believe that motor is what is used in the 50KW electric supermoto build but I am not sure. Will that dlc-28 clone motor also be available to ES members? It seems like a perfect match for the 72600 controller....
Hey,
Thanks for the attention.
First of all we can sell Motor and controllers in combo as well. Not only Motors, we can also recommend you with other components like battery, Charger, BMS and etc.
Secondly the Supermoto did not use dlc-28, it was powered by a custome made 40kw motor.

User avatar
kebekua   10 mW

10 mW
Posts: 31
Joined: Jan 19 2016 1:19am

Re: Mobipus Controller Official

Post by kebekua » Nov 07 2018 3:45am

I Danny,

So now we can buy individual units?

It seems that you also resolved the shipping issue.

If that's correct, then I should delete my group buy post.

Thanks,

Marc
''Power is not a means, it is an end.'' O'Brien, 1984

User avatar
macribs   1 GW

1 GW
Posts: 3486
Joined: Jul 22 2014 5:59pm

Re: Mobipus Controller Official

Post by macribs » Nov 07 2018 5:23am

Mobipus Official wrote:
Nov 06 2018 8:08pm
macribs wrote:
Nov 06 2018 9:38am
A while back, guess spring of 2017 there was talk about mobipus also had a dlc-28 clone motor. I believe that motor is what is used in the 50KW electric supermoto build but I am not sure. Will that dlc-28 clone motor also be available to ES members? It seems like a perfect match for the 72600 controller....
Hey,
Thanks for the attention.
First of all we can sell Motor and controllers in combo as well. Not only Motors, we can also recommend you with other components like battery, Charger, BMS and etc.
Secondly the Supermoto did not use dlc-28, it was powered by a custome made 40kw motor.
Great. Let us know when the website is updated. Or feel free to post information on all of your products here in this thread.
Yeah I know it was not the dlc-28, that motor was mentioned as a dlc-28 clone here on the forum. It was said that the clone was more efficient, had better power output and higher peak power. But full data of the motor was lacking back then. Do you have more information on that motor? Happy to see all available data, including weight and the measurements for the outer shell.

User avatar
Samd   1.21 GW

1.21 GW
Posts: 3667
Joined: Jun 28 2011 11:08pm
Location: Ballarat, AU
Contact:

Re: Mobipus Controller Official

Post by Samd » Nov 07 2018 6:09am

I’m getting lots of questions about this as several folks who know me know I was about to start selling again. Or at least I thought I was.

I partnered with Mobipus originally to get some motors and controllers and to convince them to let me sell to aftermarket. Then there was some private issues within the company. I’m sad I sold my 40kw motor on but that’s life. I wasn’t to know I wouldn’t get more.

We recently made a visit and renewed the relationship. I managed to preserve my old pricing.I undertook training and managed to get full software access. But I now have no idea how it will work again going forward. I’m reluctant to take any more orders from ES people until I know what the plan is in case I get stuck with stock.

Thanks to those who have sent me a pm to ask what is going on. I don’t know.

Sam.
http://ballaratebikes.com/

ImageImageImage
"Knowledge is knowing that a tomato is a fruit. Wisdom is knowing that a 165mm rear shock can't deliver 220mm of rear swingarm travel." - Oprah Winfrey.

Mobipus Official   1 mW

1 mW
Posts: 13
Joined: Nov 02 2018 10:31pm

Re: Mobipus Controller Official

Post by Mobipus Official » Nov 09 2018 1:56am

Samd wrote:
Nov 07 2018 6:09am
I’m getting lots of questions about this as several folks who know me know I was about to start selling again. Or at least I thought I was.

I partnered with Mobipus originally to get some motors and controllers and to convince them to let me sell to aftermarket. Then there was some private issues within the company. I’m sad I sold my 40kw motor on but that’s life. I wasn’t to know I wouldn’t get more.

We recently made a visit and renewed the relationship. I managed to preserve my old pricing.I undertook training and managed to get full software access. But I now have no idea how it will work again going forward. I’m reluctant to take any more orders from ES people until I know what the plan is in case I get stuck with stock.

Thanks to those who have sent me a pm to ask what is going on. I don’t know.

Sam.
Hi Sam, I apologize for the trouble we caused you before, I will work closely with you and provide the best service I could.
Thank you for staying with us.
Cheers.
Danny.

Mobipus Official   1 mW

1 mW
Posts: 13
Joined: Nov 02 2018 10:31pm

Re: Mobipus Controller Official

Post by Mobipus Official » Nov 09 2018 2:03am

macribs wrote:
Nov 07 2018 5:23am
Mobipus Official wrote:
Nov 06 2018 8:08pm
macribs wrote:
Nov 06 2018 9:38am
A while back, guess spring of 2017 there was talk about mobipus also had a dlc-28 clone motor. I believe that motor is what is used in the 50KW electric supermoto build but I am not sure. Will that dlc-28 clone motor also be available to ES members? It seems like a perfect match for the 72600 controller....
Hey,
Thanks for the attention.
First of all we can sell Motor and controllers in combo as well. Not only Motors, we can also recommend you with other components like battery, Charger, BMS and etc.
Secondly the Supermoto did not use dlc-28, it was powered by a custome made 40kw motor.
Great. Let us know when the website is updated. Or feel free to post information on all of your products here in this thread.
Yeah I know it was not the dlc-28, that motor was mentioned as a dlc-28 clone here on the forum. It was said that the clone was more efficient, had better power output and higher peak power. But full data of the motor was lacking back then. Do you have more information on that motor? Happy to see all available data, including weight and the measurements for the outer shell.
The motor for the supermoto was special made for our client, we couldn't leak their specs to the market.
However, I will post more updates on our controller and builds to demonstrate the performance of it.
I could post some samples of mobipus with motors that individuals can purchase on the market eg.QS, Nine-Continental, Golden, ME and etc. leave a comment for what you wish to know.

Mobipus Official   1 mW

1 mW
Posts: 13
Joined: Nov 02 2018 10:31pm

Re: Mobipus Controller Official

Post by Mobipus Official » Nov 09 2018 2:15am

kebekua wrote:
Nov 07 2018 3:45am
I Danny,

So now we can buy individual units?

It seems that you also resolved the shipping issue.

If that's correct, then I should delete my group buy post.

Thanks,

Marc
As the official, we encourage those who wish to buy our product to seek for local retailer, not only they could provide faster and better service, but also they know the demand and need for individual user better than us.

litespeed   100 kW

100 kW
Posts: 1311
Joined: Aug 11 2010 4:42pm
Location: St. Peters, Missouri

Re: Mobipus Controller Official

Post by litespeed » Nov 09 2018 6:15pm

I would like to see how the 72400 would works with my QS205 3.5T motor in a 17” rim. I’d probably never go over 250 battery amps but sometimes want more than the MaxE puts out now.

Tom
I'm married so you know I'm no stranger to pain!

Mobipus Official   1 mW

1 mW
Posts: 13
Joined: Nov 02 2018 10:31pm

Re: Mobipus Controller Official

Post by Mobipus Official » Nov 09 2018 10:03pm

litespeed wrote:
Nov 09 2018 6:15pm
I would like to see how the 72400 would works with my QS205 3.5T motor in a 17” rim. I’d probably never go over 250 battery amps but sometimes want more than the MaxE puts out now.

Tom
May I ask whats the rated RPM for your motor under 72V?
For 3kw motors we recommend you to use 72200. The motor temperature will easily exceed 100 degrees if you use 72400.

Post Reply