Laser Cut Drop-outs for Custom Frames - $25/Set + Shipping

Place for dealers to post items for sale.
Post Reply
User avatar
teslanv   100 MW

100 MW
Posts: 2675
Joined: Nov 03 2013 8:42pm
Location: Bellevue, WA - USA
Contact:

Laser Cut Drop-outs for Custom Frames - $25/Set + Shipping

Post by teslanv » Apr 03 2019 3:56pm

5/16" thick 4130 Chromoly Laser Cut Drop-outs for Custom Frames. These are left over from my "Farfle Swing Arm" project that never got off the ground.
The Slots accept 10mm axle flats for DD Hub motors. I do recommend making them "clamping". Needless to say, you will need to be able to weld these on to your swing arm.
Set includes left & right sides. (Right Side has a derailleur mount)
$25 per set. + Shipping. ($8 for USPS Priority Mail to USA, or about $25 to EU/AUS)
As of this posting, I have 11 sets available. If you want to purchase all of them, I'll discount the price.
IMG_20190403_133415943.jpg
IMG_20190403_133437392.jpg
Here are the Drawings of the Farfle Swing Arm that includes these plates:
Farfle Swingarm V2.6.pdf
(101.66 KiB) Downloaded 32 times
DD Hubs, Batteries, Controllers & Custom Ebikes.
http://westcoastelectrics.com
West Coast Electric Cycles
Bellevue, WA
USA

User avatar
skeetab5780   10 MW

10 MW
Posts: 2326
Joined: Jun 15 2009 10:58pm
Location: MA
Contact:

Re: Laser Cut Drop-outs for Custom Frames - $25/Set + Shipping

Post by skeetab5780 » Apr 04 2019 10:34am

Ill take another set! The ones I used to extend the Kuberg are mint

I think I have another project coming up that will require them and id hate to miss out

calfeetwenty   10 W

10 W
Posts: 65
Joined: Aug 12 2016 8:31am

Re: Laser Cut Drop-outs for Custom Frames - $25/Set + Shipping

Post by calfeetwenty » May 25 2019 10:03pm

I will take 2 sets. Send me a PayPal invoice.
Electra 7D/BBSHD, 24 spd hybrid drive 52 volt....mods coming
Electra 7D Fat/Mxus 3000 Turbo, 72 volt.
Paratrooper Pro/BBS02/Alfine 8, 52 volt...back to regular bike
KMX Trike 1500 Edge 72 volt
Luna Cargo/ possible 2wd...on the back burner again
Vector Typhoon QS 205/50 6T half done
Easy Racer LWB recumbent, Bafang G310 stealth...soon
Hp Velotechnik scorpion fs 26 Mxus 30mm cassette motor...soon

User avatar
teslanv   100 MW

100 MW
Posts: 2675
Joined: Nov 03 2013 8:42pm
Location: Bellevue, WA - USA
Contact:

Re: Laser Cut Drop-outs for Custom Frames - $25/Set + Shipping

Post by teslanv » Jun 01 2019 1:05am

calfeetwenty wrote:
May 25 2019 10:03pm
I will take 2 sets. Send me a PayPal invoice.
Will do
DD Hubs, Batteries, Controllers & Custom Ebikes.
http://westcoastelectrics.com
West Coast Electric Cycles
Bellevue, WA
USA

Post Reply