louis raaijmakers
100 W
- Joined
- Oct 9, 2013
- Messages
- 190
hey guys,
while a was away for i while i couldn't get my head away, from a project i was thinking off a long time...
but school got in the way, then covid-19 hit. and around that time all the lessons where online. that wasn' t working for me so i got a new project on my hands...
first a small project a drift trike but now build from scratch: (pictures will folow tonight)
specs:
- 1000w 60v bosch hub motor
- kelly kls6030S
- 3x 60v 28ah battery 18650's
- rear kart axle and bearings
But the "Real" project a street legal crosskart with +-140hp diffrential with manual locker.
build to last and to take a hit onroad as offroad.
I needed parts so i looked for some drive lines from cars/motorcycles etc.
but none of the car parts had diffrentials that could be locked solid..
So i went with the next parts:
2x zero zf 75-7 motors
2x sevcon size 6 programmed for zf75-7
2x 14.4kw battery pack
1x audi quattro 1985 diffrential with manual locker
1x street legal gasoline buggy Adly atk 125
lucky for me i could make my own project as a school project, what helped a lot so i could work full time on the crosskart/buggy.
but i would get a budget from school (1000,-) but after some discussing that didn't went through..
but i did manage to find a sponsor that was willing to help with the project!
we measured the old buggy and went to work.
original buggy
original buggy
getting an idea for the width
design/drawing the new frame
stress test.
while a was away for i while i couldn't get my head away, from a project i was thinking off a long time...
but school got in the way, then covid-19 hit. and around that time all the lessons where online. that wasn' t working for me so i got a new project on my hands...
first a small project a drift trike but now build from scratch: (pictures will folow tonight)
specs:
- 1000w 60v bosch hub motor
- kelly kls6030S
- 3x 60v 28ah battery 18650's
- rear kart axle and bearings
But the "Real" project a street legal crosskart with +-140hp diffrential with manual locker.
build to last and to take a hit onroad as offroad.
I needed parts so i looked for some drive lines from cars/motorcycles etc.
but none of the car parts had diffrentials that could be locked solid..
So i went with the next parts:
2x zero zf 75-7 motors
2x sevcon size 6 programmed for zf75-7
2x 14.4kw battery pack
1x audi quattro 1985 diffrential with manual locker
1x street legal gasoline buggy Adly atk 125
lucky for me i could make my own project as a school project, what helped a lot so i could work full time on the crosskart/buggy.
but i would get a budget from school (1000,-) but after some discussing that didn't went through..
but i did manage to find a sponsor that was willing to help with the project!
we measured the old buggy and went to work.
original buggy
original buggy
getting an idea for the width
design/drawing the new frame
stress test.