Lightweight AWD Sportscar

Electric cars, trucks, ATVs, NEVs - things bigger than a motorcycle.
Post Reply
designerguy
1 mW
1 mW
Posts: 11
Joined: Jan 08, 2018 7:26 pm

Lightweight AWD Sportscar

Post by designerguy » Jan 28, 2018 12:33 pm

I’ve just started on the design and development of my own personal project car. I have been a long time reader of these forums, constantly inspired by all the collaborative development that happens.

Some background:

By trade I am an automotive exterior designer. I work at a one of the big 3. Last year I sold my personal car as I hadn’t used it in over a year, I had been walking to work. A week later I was told my job was moving and suddenly my commute got quite a bit longer. I started looking into buying another car, being a designer I wanted something special (read: AM V8 Vantage, Lotus Elise, Lotus Evora.) It’s winter here currently in Michigan, and dealers aren’t too keen on me test driving their sports cars in the snow. That’s when my brilliant (stupid) idea came to design and build my own car.

So I decided to jump head first off of the development and financial cliff.

The Idea:

600kg
180kw
Individual wheel motors with belt reduction
Low Cd (~0.2)
Low frontal area (~1.5 m^2)
Smallish battery pack with high charge rate (19kw LTO)

My bad influences:

Palatov Motorsports
Formula SAE
larsb motor remake
Every Lebowski controller thread
Farfle/Miles various motor projects

So far I have bought the batteries and motor stators to help characterise the rest of the car around it. I contacted Alexey from Revolt who sent 360mm of RV 160 stators. That will make 4 90mm stacks, one for each motor. This should be good for ~130 Nm per motor, with a 4:1 reduction ratio that’s 520Nm per wheel (1.2 g acceleration!)

Things to do from easiest to hardest:

Exterior
Chassis and suspension
Motor mechanical
Motor electrical
Motor Controllers
High amp BMS
High power battery charger
...
...
Make it all work

I will be making threads for the motor and controller seperately.

User avatar
amberwolf
100 GW
100 GW
Posts: 24496
Joined: Aug 17, 2009 6:43 am
Location: Phoenix, AZ, USA, Earth, Sol, Local Bubble, Orion Arm, Milky Way, Local Group
Contact:

Re: Lightweight AWD Sportscar

Post by amberwolf » Jan 28, 2018 12:47 pm

Will you be trying for regen or eabs braking, with that belt reduction?

Any concepts for the body yet, beyond the mentioned models?

Have you already worked out the registration / insurance path hurdles?

designerguy
1 mW
1 mW
Posts: 11
Joined: Jan 08, 2018 7:26 pm

Re: Lightweight AWD Sportscar

Post by designerguy » Jan 28, 2018 12:57 pm

Registration is pretty easy in Michigan. If I follow basic FMVSS guidelines I should have no problem. Insurance will be another story but I cross that bridge when I get to it.

I do plan on using regen braking with the belt drive. LTO have an insane charge rate (8C) which translates to 152KW under braking, in other words close to 1g would be possible just with regen. I’m not sure how close I will get to that number, but I would like to get as close as possible.

No real sketches or models for the body design yet, that’s the part I’m most comfortable with, and least worried about. I’ll end up changing it right up until I cut the molds anyways :lol:

designerguy
1 mW
1 mW
Posts: 11
Joined: Jan 08, 2018 7:26 pm

Re: Lightweight AWD Sportscar

Post by designerguy » Feb 01, 2018 8:28 pm

Got the batteries and stators in tonight. Made a quick model of the center battery box/ frame and ran a torsional moment through it. It gets about 10k lb-ft/deg just with just the center frame and no passenger cell!
Attachments
rivetedaluminumskin.JPG
(127.46 KiB) Not downloaded yet

mettleramiel
10 W
10 W
Posts: 95
Joined: Dec 28, 2007 10:26 am

Re: Lightweight AWD Sportscar

Post by mettleramiel » Feb 06, 2018 7:54 am

I'm really looking forward to this thread!

kinghappy
1 µW
1 µW
Posts: 4
Joined: May 05, 2015 2:01 pm

Re: Lightweight AWD Sportscar

Post by kinghappy » Feb 07, 2018 2:59 am

Collin,

i'm looking forward to following this thread ! Most guys wouldn't even know how to start a body design / fab and you say that is the easiest part .

with those LTO batteries you will be able to charge that car from dead to full in 7.5 minutes ! your going to love that . what pack voltage are you going with ? have a large charger coming in next week , came with some LTO cells i purchased .Its big , i will check its rating .
mike

User avatar
Dauntless
100 GW
100 GW
Posts: 6173
Joined: May 29, 2010 1:49 am
Location: Coordinates: 33°52′48″N 117°55′43″W

Re: Lightweight AWD Sportscar

Post by Dauntless » Feb 07, 2018 3:04 pm

Got any Exner's of the car itself?
Any sufficiently advanced technology is INDISTINGUISHABLE FROM MAGIC!
- Arthur C. Clarke

SlowCo
10 kW
10 kW
Posts: 639
Joined: Jan 05, 2015 5:43 pm
Location: The Netherlands

Re: Lightweight AWD Sportscar

Post by SlowCo » Feb 07, 2018 4:58 pm

This reads as a multi year effort of a few thousand hours to get this built. Good luck and keep us updated.

designerguy
1 mW
1 mW
Posts: 11
Joined: Jan 08, 2018 7:26 pm

Re: Lightweight AWD Sportscar

Post by designerguy » Feb 07, 2018 8:24 pm

I'm currently working on getting some more accurate CFD software to test ideas before I show the whole design. I thought I would leave this teaser here for you, though.
Attachments
Image002.jpg
(116.86 KiB) Not downloaded yet
Image003.jpg
(119.19 KiB) Not downloaded yet
Image001.jpg
(102.11 KiB) Not downloaded yet

User avatar
speedmd
100 MW
100 MW
Posts: 2783
Joined: Nov 14, 2012 12:16 pm
Location: new england

Re: Lightweight AWD Sportscar

Post by speedmd » Feb 07, 2018 9:24 pm

Nice work! :D I always thought one of the best from the past to take inspiration from is the stratos. Image

https://3bv8x43y68hc448rg43goku7yq-wpen ... 90x603.jpg

designerguy
1 mW
1 mW
Posts: 11
Joined: Jan 08, 2018 7:26 pm

Re: Lightweight AWD Sportscar

Post by designerguy » Feb 11, 2018 7:12 pm

i have the CFD software working a little better now. I have been running non-stop simulations, iterating to get a lower Cd. So far I'm at 0.20 for the Cd and 1.54 m^2 frontal area. That gives a drag area of 0.307 m^2; ~the same drag area as a bicyclist with drops! That's about 7kw at 30m/s (highway speed) including rolling resistance which means that a range of over 120 miles should be possible.

Some big contributors to this were the decision to use BMW i3 wheels and tires, and to move away from a flat underbody to a shaped underbody similar to Ecomarathon cars and Solar Challenge cars.
Attachments
simulation003.JPG
(78.17 KiB) Not downloaded yet

Hillhater
100 GW
100 GW
Posts: 8520
Joined: Aug 03, 2010 10:33 pm
Location: Sydney ..(Hilly part !) .. Australia/ Down under !

Re: Lightweight AWD Sportscar

Post by Hillhater » Feb 11, 2018 9:33 pm

speedmd wrote:
Feb 07, 2018 9:24 pm
Nice work! :D I always thought one of the best from the past to take inspiration from is the stratos. Image

https://3bv8x43y68hc448rg43goku7yq-wpen ... 90x603.jpg
Watch for the Geneva show next month.
The Stratos is being relaunched with a Ferrari drivetrain.
http://www.caradvice.com.au/621491/lanc ... rn-geneva/
This forum owes its existence to Justin of ebikes.ca

designerguy
1 mW
1 mW
Posts: 11
Joined: Jan 08, 2018 7:26 pm

Re: Lightweight AWD Sportscar

Post by designerguy » Feb 13, 2018 9:06 pm

The Stratos is pretty lovely.....

Here is the latest iteration. The Cd now stands at 0.181. It would be great if these numbers were accurate! 4.5 KW aero-load at 30m/s!

Now that the aero package is coming together I need to start on the motors to make sure I don't lose too much in iron losses at speed :D
Attachments
simulation004.JPG

whereswally606
100 kW
100 kW
Posts: 1147
Joined: Jun 19, 2011 2:11 pm
Location: Cheshire, UK

Re: Lightweight AWD Sportscar

Post by whereswally606 » Feb 14, 2018 8:48 am

wow, 0.18 is crazy low cd, I drive a mk1 insight and that has some of the best oem cd for a mass produced vehicle.

BTW like the fact you are interested in Lebowski threads, things should move along for the bobc Lebowski project now. Nice renderings btw.
Distributing "Lebowski" FOC Controller PCB (Through hole) since 2016
Moped: Emax 110s 2009

designerguy
1 mW
1 mW
Posts: 11
Joined: Jan 08, 2018 7:26 pm

Re: Lightweight AWD Sportscar

Post by designerguy » Feb 14, 2018 10:50 am

I’ll be needing to make 8 controllers :lol:

I’m hoping to develop a nice compact 25kW powerstage for the SMD controller for insane ebike and light motorcycle use. Once again I’m learning as I go with all of this :lol:

To put the drag into perspective the first gen insight has a CdA of 0.56m^2This has a CdA of 0.28m^2.

whereswally606
100 kW
100 kW
Posts: 1147
Joined: Jun 19, 2011 2:11 pm
Location: Cheshire, UK

Re: Lightweight AWD Sportscar

Post by whereswally606 » Feb 14, 2018 12:08 pm

like I said, I thought it was pretty insane cd and thus cda vals

8 controllers eh?

I am planning to make a few boards each evening once the kid and wife are tucked up in bed. Also got plans to build an opensource pick & place using my anet a8 so that should help with some of the tedium. Glad to have another Lebowski convert on board with lofty plans. Let me know what you need via pm and I shall endeavour to deliver. I wonder whether it will get Arlin's CRX a run for it money when its done :shock:
Distributing "Lebowski" FOC Controller PCB (Through hole) since 2016
Moped: Emax 110s 2009

designerguy
1 mW
1 mW
Posts: 11
Joined: Jan 08, 2018 7:26 pm

Re: Lightweight AWD Sportscar

Post by designerguy » Feb 14, 2018 5:31 pm

For the controller I’m looking at 3 MTI85W100GC similar to what you had posted in one of the threads. It would be nice to be able to buy MTI145WX100GD so I could actually make decent power though.

designerguy
1 mW
1 mW
Posts: 11
Joined: Jan 08, 2018 7:26 pm

Re: Lightweight AWD Sportscar

Post by designerguy » Feb 14, 2018 8:30 pm

GOOD NEWS!

Stator losses are only about 50W per motor at 30m/s! (At least per the simulation) I suspect it will be a bit higher since the laminations are joined together via a stamped tab, shorting the stack. There will also be stator, bearing, windage, drivetrain, and controller losses to take into account. I can only hope to keeps them below 1kw together to get the total power at 30m/s under 7kW. (Assuming 1.5kW rolling resistance)

User avatar
liveforphysics
100 GW
100 GW
Posts: 14520
Joined: Oct 29, 2008 1:48 am
Location: Santa Cruz, CA, USA

Re: Lightweight AWD Sportscar

Post by liveforphysics » Feb 15, 2018 12:48 am

designerguy wrote:
Feb 14, 2018 8:30 pm
GOOD NEWS!

Stator losses are only about 50W per motor at 30m/s! (At least per the simulation) I suspect it will be a bit higher since the laminations are joined together via a stamped tab, shorting the stack. There will also be stator, bearing, windage, drivetrain, and controller losses to take into account. I can only hope to keeps them below 1kw together to get the total power at 30m/s under 7kW. (Assuming 1.5kW rolling resistance)
If the lams are staked together at a location that has little to no flux density change as the motor operates, it will cause little to no added eddy/core loss to have them electrically connected.

You may find soon enough that putting less mass and bulk in the reduction stage and more mass and bulk into copper and iron in your stator makes an overall higher performance vehicle, especially so with respect to drag times.
Each carcinogen vapor exposure includes a dice roll for cancer.

Each mutagen vapor exposure includes a dice roll for reproductive genetic defects in your children.

Each engine start sprays them into a shared atmosphere which includes beings not offered an opportunity to consent accepting these cancer experiences and defective genetics life experiences.

Every post is a free gift to the collective of minds composing the living bleeding edge of LEV development on our spaceship.

designerguy
1 mW
1 mW
Posts: 11
Joined: Jan 08, 2018 7:26 pm

Re: Lightweight AWD Sportscar

Post by designerguy » Feb 15, 2018 6:23 am

liveforphysics wrote:
Feb 15, 2018 12:48 am

If the lams are staked together at a location that has little to no flux density change as the motor operates, it will cause little to no added eddy/core loss to have them electrically connected.

You may find soon enough that putting less mass and bulk in the reduction stage and more mass and bulk into copper and iron in your stator makes an overall higher performance vehicle, especially so with respect to drag times.
Absolutely. Eventually if budget permits I would like to move to a direct drive motor. The biggest issue was just finding stator laminations (YASA, EVO, and EMRAX would be a significant portion of my budget) as it stands I’m just using a single stage reduction to the wheels. Each motor is good for >140Nm, so even at 4:1 its >1g acceleration.

The stator is staked through the center of the teeth. I’m not sure how bad this will be for eddy currents...

User avatar
speedmd
100 MW
100 MW
Posts: 2783
Joined: Nov 14, 2012 12:16 pm
Location: new england

Re: Lightweight AWD Sportscar

Post by speedmd » Feb 15, 2018 10:21 am

Tooth centers are high flux change areas. Somewhere in the non magnetic path area of the tooth base look to be much better.

Image

designerguy
1 mW
1 mW
Posts: 11
Joined: Jan 08, 2018 7:26 pm

Re: Lightweight AWD Sportscar

Post by designerguy » Feb 18, 2018 4:19 pm

I played with narrowing the tracks, rear track more so than front. Drag area is now 0.22 m^2. That's a decrease of 21% from the previous test. I want to play with how much I can reduce drag for maximum range.
Attachments
simulation006.JPG

Post Reply