Thanks for the reply
The throttle has the battery indecator and Eco turbo mode, think I'm going to replace the controller and throttle to be on the safe side as the wires coming from the throttle are a mess, the key switch has 3 wires but only 2 of them go to the connector with 2 pins The other 1 is cut just before the connector, the key switch is 3way on,off, lights. Is this right or is the wire ment to go somewhere ?
Could I use a 1500w controller with my 1600w motor (boma)
https://m.ebay.co.uk/itm/1500W-48V-Brus ... 2584058222