VESC problem

Lightweight / Folding / Portable EVs - seats optional
Post Reply
garrettgajewski   1 mW

1 mW
Posts: 17
Joined: Mar 26 2015 4:25pm

VESC problem

Post by garrettgajewski » Jun 21 2015 4:42pm

hi, before i by a vesc, i wanted to download all of the configuration and stuff onto my computer. In Ben's tutorial, he uses terminal; however, I have windows therefore, i use command prompt. When i tried to copy and paste the instructions into command prompt, nothing came up and it was kind of like an error. Anybody know what i did wrong?

torqueboards   100 MW

100 MW
Posts: 2940
Joined: May 27 2013 10:02pm
Location: San Francisco, CA
Contact:

Re: VESC problem

Post by torqueboards » Jun 21 2015 4:44pm

You need a VM of Linux or a computer with Linux / Ubuntu for the commands to work.
DIYElectricSkateboard.com Electric Skateboard Kits

777arc   10 W

10 W
Posts: 97
Joined: Nov 04 2014 8:57pm
Location: Blacksburg, VA, USA

Re: VESC problem

Post by 777arc » Jun 21 2015 7:31pm

Yep. It's pretty easy using virtualbox and a linux .iso file you download from a site like ubuntu.

chuttney1   100 W

100 W
Posts: 243
Joined: Apr 03 2013 2:44pm
Location: Los Angeles, CA

Re: VESC problem

Post by chuttney1 » Jun 21 2015 10:19pm

As others have said, Ben's code is compiled to work with Linux. I use Ubuntu 14.10 since there was one part of Ben's code for the "GNU ARM Embedded Toolchain" by Terry Guo that wasn't update to work on Ubuntu 15. I do not know if one for Ubuntu 15 is out. Use the LTS of Ubuntu 14.

Post Reply