AngelDust|Trampa HolyPro 35|SK6374 168kv|E-TOXX|Dual VESC

okp

100 kW
Joined
Oct 26, 2014
Messages
1,193
Location
Paris
Hey,

Here is my new build. I am really new to mountainboarding, today was my first time on such deck and it's lots of fun in Paris downtown !

Board : Trampa Holy Pro 35
Mount : made in E-TOXX
ESC : Two VESCs 4.10 FW1.14 / CANBUS
Battery : 12S 5AH
Electronic enclosure : UW Kinetic 206
Battery enclosure : UW Kinetic 308
Motors : Two SK 6374 from Hobbyking

Miles coverage : 13km : 3600mAH / 20A maximum peak.

The two cheap 10C Multistar 5200mAH in series perform perfectly. This electronic mountainboard is just AWESOME in Paris. Lots of fun. You can jump over stairs, sidewalks. I will try to work on my level as this is difficult to learn.

Drilling the deck to mount the battery enclosure

1449424261-img-4331.jpg

1449424261-img-4333.jpg


Assembly of E-TOXX.COM mount with threadlock

1449424261-img-4335.jpg


Flatening the shaft with a dremel

1449424261-img-4344.jpg


Battery Enclosure with the two Multistar 10C in series

1449424261-img-4346.jpg

1449424261-img-4347.jpg


Rear of the deck, you can see the VESCs enclosure

1449424261-img-4348.jpg


Dual VESC powered by 12S, using CANBUS communication

1449424261-img-4352.jpg

1449424261-img-4350.jpg


First test session in Paris !

1449422209-untitled.jpg

1449422209-untitled2.jpg

1449422209-untitled3.jpg

1449422209-untitled4.jpg

1449422209-untitled6.jpg

1449422209-untitled7.jpg

1449422209-untitled8.jpg

1449422209-untitled9.jpg

1449422209-untitled10.jpg

1449422209-untitled11.jpg

1449422209-untitled12.jpg


Enjoy !
 
Thanks!

The motor mount is beautiful engineered by Sir Jenso (http://www.e-toxx.com). This guy is ultra friendly and I am still amazed by the quality of the CNC work. I am not able to judge it technically as I am a aluminium noob.. but it's clearly awesome!

I will try to get better and make some footage here : Palais de Tokyo / PARIS

day2_module_go_skateboarding_day_2010_19.sized_.jpg
 
Thanks! You will see it's lots of fun; really a smooth ride. The trampa is just awesome due to it's flex. I went for 15 ply for 72kg.

2 x Wheelsprockets 60Z « lightened »
2 x Motorsprockets 10Z 8mm
 
Hey!

Just for correct Information:

On OKP´s Trampa the reduction is 10/60 (-;

The 13/60 is from 6S Setup.

Nice Build OKP !

Jenso
 
cool! i just think the fact that your feet are strapped to the board is a little scary and dangerous
 
I'm super-stoked! Nice ride! I ordered underwater kinetics cases for my build too, and decided to make two swappable 12S 10 Ah packs, instead of one 12S 15Ah (two batteries were to high for my aesthetics). Did You mount cases directly on the deck or used some kind of rubber padding? I'm thinking about using 10mm high cylindrical vibration isolators.
 
thanks, I need now to practice on wheelings and get a better balance + get some stronger thighs at the gym !

good move on the battery packs!

I used 1cm neoprene just glued to the deck for the rear box and 9 little neoprene 3x1cm below the battery box. The battery box is only mounted with two nuts as displayed on the above pictures.

This is for the rear box :

IMG_4328.jpg
 
Looks like a piece of art okp. Love the blue wheels! I don't see any place on his website to buy, did you contact him on the website and ask him for paypal link?
 
hey lox,

yes I was hesitating with the red but the blue looks more fun. I was also about to paint everything gold... but my girlfriend stopped me :)

Just reach Jenso by email, he answers ultra quickly and will provide you with all the appropriate information if you plan to make such build.
 
Cool thanks okp. I will surely be making a mountainboard in the near future.
 
Nice build!
 
Back
Top