Ianhill
1 MW
- Joined
- Sep 25, 2015
- Messages
- 2,871
I wanted a fairly agile light scooter upto 30mph with a go anywhere attitude Ive built a 10s9p 18650 razor in the past but needed a bit more punch without being to power hungry so I built this mods as follows.
Razor e300/3000
Front disk 160mm rotor
Rear band brake so i can still adjust chain tension
500 lumens dual spectrum headlight plus 1w red rear
50v 60a 15khz pwm controller 12 FETs and 4 caps (very cheap but reliable and widely available)
12s2p 16ah lipo for drive only
1s3p 11.4ah lion
My1020 36v/27.8a overvolted/current to 50.4v/60a peak
I run a 60amp maxi blade fuse for the controller and 5amp fuse for my lights and voltage step up board 4-12v for my anti run away relay and car horn .
It all fits in the stock battery tray but the motor had to go above deck as it would have ruined the ground clearance all in all it cost £250 battery's included but had a charger already videos too come shortly.
Razor e300/3000
Front disk 160mm rotor
Rear band brake so i can still adjust chain tension
500 lumens dual spectrum headlight plus 1w red rear
50v 60a 15khz pwm controller 12 FETs and 4 caps (very cheap but reliable and widely available)
12s2p 16ah lipo for drive only
1s3p 11.4ah lion
My1020 36v/27.8a overvolted/current to 50.4v/60a peak
I run a 60amp maxi blade fuse for the controller and 5amp fuse for my lights and voltage step up board 4-12v for my anti run away relay and car horn .
It all fits in the stock battery tray but the motor had to go above deck as it would have ruined the ground clearance all in all it cost £250 battery's included but had a charger already videos too come shortly.