Will My Electric Skate Board setup work?

Hi
I was wonder if the motor and gear ratio that i have will work well
http://www.hobbyking.com/hobbyking/store/__39374__Turnigy_HeliDrive_SK3_Competition_Series_4962_500kv_700_90_size_heli_AU_Warehouse_.html
I will only be using this at 6s.
i have a gear ratio of 4:1 with a wheel circumference of 21cm

thank you in advance

I would go with a lower kv motor - any of the SK3 63mm 190-24xkv should work well. Tacon bigfoot also is a great one i've heard (have 2 waiting to try).

torqueboards/DIYes motors, or Enertion R Spec motors also - can't go wrong.

why only 6s? what ESC are you going to use?

And what gearing - link just brought up a heli 500kv motor...

hth - gl!

I am going with 6s because i am trying to go on the cheap and hv esc's are quite expensive.
i am using a gear ratio of 4:1

Oh And Also The esc i am using is http://www.banggood.com/Red-Brick-200A-ESC-Brushless-ESC-OPTO-NO-BEC-200AOPTO-p-77974.html