Hi Guys
Just starting a build thread on my Trampa mountain board. Parts I'm using so far as follows:
Trampa holypro 35 degree board with bindings (will likely order the heel straps also as feet seem to come out reasonably easy without them)
Ultimate trucks
Superstar hubs
Street tyres (195mm diameter)
Torqueboards 12s ESC with torqueboards remote
Twin Turnigy SK3 6374 168KV motors
25h Chain and sprocket drive with 15T motor sprocket and 68T redrilled pit bike sprocket for the wheels both from ebay with an estimated top speed of about 40kph
12S Battery yet to be determined due to difficulty getting 18650 batterys at an affordable price and hobbyking not shipping lipos?
Motor mounts I am going to have a go at making by hand first and if that fails I will likely order some E-Toxx mounts instead.
Still waiting for most of the equipment to arrive other than the board itself so will attach pics as I get some progress.
Thanks
Shane
Just starting a build thread on my Trampa mountain board. Parts I'm using so far as follows:
Trampa holypro 35 degree board with bindings (will likely order the heel straps also as feet seem to come out reasonably easy without them)
Ultimate trucks
Superstar hubs
Street tyres (195mm diameter)
Torqueboards 12s ESC with torqueboards remote
Twin Turnigy SK3 6374 168KV motors
25h Chain and sprocket drive with 15T motor sprocket and 68T redrilled pit bike sprocket for the wheels both from ebay with an estimated top speed of about 40kph
12S Battery yet to be determined due to difficulty getting 18650 batterys at an affordable price and hobbyking not shipping lipos?
Motor mounts I am going to have a go at making by hand first and if that fails I will likely order some E-Toxx mounts instead.
Still waiting for most of the equipment to arrive other than the board itself so will attach pics as I get some progress.
Thanks
Shane